Ankle-Knee prosthesis with powered ankle and energy transfer for CYBERLEGs α-prototype

Restoring natural walking for amputees has been increasingly investigated because of demographic evolution, leading to increased number of amputations, and increasing demand for independence. The energetic disadvantages of passive pros-theses are clear, and active prostheses are limited in autonomy. This paper presents the simulation, design and development of an actuated knee-ankle prosthesis based on a variable stiffness actuator with energy transfer from the knee to the ankle. This approach allows a good approximation of the joint torques and the kinematics of the human gait cycle while maintaining compliant joints and reducing energy consumption during level walking. This first prototype consists of a passive knee and an active ankle, which are energetically coupled to reduce the power consumption.

[1]  Michael Goldfarb,et al.  Design and Control of a Powered Transfemoral Prosthesis , 2008, Int. J. Robotics Res..

[2]  John Launer.  Odyssey , 2012, Postgraduate Medical Journal.

[3]  M. Arnout,et al.  Concept and design of the HEKTA (Harvest Energy from the Knee and Transfer it to the Ankle) transfemoral prosthesis , 2012, 2012 4th IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob).

[4]  E. Mackenzie,et al.  Limb Amputation and Limb Deficiency: Epidemiology and Recent Trends in the United States , 2002, Southern medical journal.

[5]  S. Collins,et al.  Recycling Energy to Restore Impaired Ankle Function during Human Walking , 2010, PloS one.

[6]  Bram Vanderborght,et al.  The AMP-Foot 2.0: Mimicking intact ankle behavior with a powered transtibial prosthesis , 2012, 2012 4th IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics (BioRob).

[7]  Joseph M. Czerniecki,et al.  Transtibial energy-storage-and-return prosthetic devices , 2002 .

[8]  Thomas G. Sugar,et al.  The SPARKy (Spring Ankle With Regenerative Kinetics) Project: Design and Analysis of a Robotic Transtibial Prosthesis With Regenerative Kinetics , 2007 .

[9]  S. Stramigioli,et al.  Prototype design and realization of an innovative energy efficient transfemoral prosthesis , 2010, 2010 3rd IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics.

[10]  Hugh M. Herr,et al.  Powered ankle-foot prosthesis to assist level-ground and stair-descent gaits , 2008, Neural Networks.

[11]  Hugh Herr,et al.  Agonist-antagonist active knee prosthesis: a preliminary study in level-ground walking. , 2009, Journal of rehabilitation research and development.

[12]  Daniel Vélez Día,et al.  Biomechanics and Motor Control of Human Movement , 2013 .

[13]  S. E. Solomonidis,et al.  Biomechanical evaluation of SACH and uniaxial feet , 1984, Prosthetics and orthotics international.

[14]  Bram Vanderborght,et al.  Passive Ankle-Foot Prosthesis Prototype with Extended Push-Off , 2013 .

[15]  T.G. Sugar,et al.  SPARKy 3: Design of an active robotic ankle prosthesis with two actuated degrees of freedom using regenerative kinetics , 2008, 2008 2nd IEEE RAS & EMBS International Conference on Biomedical Robotics and Biomechatronics.

[16]  A. Lees,et al.  A biomechanical comparison of the SACH, Seattle and Jaipur feet using ground reaction forces , 1995, Prosthetics and orthotics international.

[17]  Bram Vanderborght,et al.  MACCEPA, the mechanically adjustable compliance and controllable equilibrium position actuator: Design and implementation in a biped robot , 2007, Robotics Auton. Syst..

[18]  Bram Vanderborght,et al.  A biomechatronical transtibial prosthesis powered by pleated pneumatic artificial muscles , 2008, Int. J. Model. Identif. Control..

[19]  B. J. Mcfayden.  An Integrated Biomechanical Analysis of Normal Stair Ascent and Descent , 1988 .