Evolution of vertical phase separation in P3HT:PCBM thin films induced by thermal annealing

Abstract The achievement of the desirable morphology at the nanometer scale of bulk heterojunctions consisting of a conjugated polymer with fullerene derivatives is a prerequisite in order to optimize the power conversion efficiency of organic solar cells. The various experimental conditions such as the choice of solvent, drying rates and annealing have been found to significantly affect the blend morphology and the final performance of the photovoltaic device. In this work, we focus on the effects of post deposition thermal annealing at 140 °C on the blend morphology, the optical and structural properties of bulk heterojunctions that consist of poly(3-hexylthiophene) (P3HT) and a methanofullerene derivative (PCBM). The post thermal annealing modifies the distribution of the P3HT and the PCBM inside the blend films, as it has been found by Spectroscopic Ellipsometry studies in the visible to far-ultraviolet spectral range. Phase separation was identified by AFM and GIXRD as a result of a slow drying process which took place after the spin coating process. The increase of the annealing time resulted to a significant increase of the P3HT crystallinity at the top regions of the blend films.

[1]  Ximin He,et al.  Controlling nanoscale morphology in polymer photovoltaic devices , 2010 .

[2]  Gang Li,et al.  “Solvent Annealing” Effect in Polymer Solar Cells Based on Poly(3‐hexylthiophene) and Methanofullerenes , 2007 .

[3]  T. Yoon,et al.  Composition-dependent phase separation of P3HT:PCBM composites for high performance organic solar cells , 2010 .

[4]  Gijsbertus de With,et al.  Three-dimensional nanoscale organization of bulk heterojunction polymer solar cells. , 2009, Nano letters.

[5]  Valentin D. Mihailetchi,et al.  Charge Transport and Photocurrent Generation in Poly(3‐hexylthiophene): Methanofullerene Bulk‐Heterojunction Solar Cells , 2006 .

[6]  Xiaoniu Yang,et al.  Scanning near-field and confocal Raman microscopic investigation of P3HT-PCBM systems for solar cell applications , 2006 .

[7]  A. Arias.  Vertically Segregated Polymer Blends: Their Use in Organic Electronics , 2006 .

[8]  Pei-Jung Li,et al.  Highly efficient and stable inverted polymer solar cells integrated with a cross-linked fullerene material as an interlayer. , 2010, Journal of the American Chemical Society.

[9]  I. Alexandrou,et al.  Optical properties of conjugated poly(3-hexylthiophene)/[6,6]-phenylC61-butyric acid methyl ester composites , 2007 .

[10]  Gang Li,et al.  Recent Progress in Polymer Solar Cells: Manipulation of Polymer:Fullerene Morphology and the Formation of Efficient Inverted Polymer Solar Cells , 2009 .

[11]  S. Logothetidis,et al.  Study of the electronic and vibrational properties of poly(ethylene terephthalate) and poly(ethylene naphthalate) films , 2007 .

[12]  Gang Li,et al.  Investigation of annealing effects and film thickness dependence of polymer solar cells based on poly(3-hexylthiophene) , 2005 .

[13]  M. Chabinyc.  X‐ray Scattering from Films of Semiconducting Polymers , 2008 .

[14]  Christoph J. Brabec,et al.  Correlation Between Structural and Optical Properties of Composite Polymer/Fullerene Films for Organic Solar Cells , 2005 .

[15]  Chun-Wei Chen,et al.  Investigation of nanoscale morphological changes in organic photovoltaics during solvent vapor annealing , 2008 .

[16]  Gang Li,et al.  Vertical Phase Separation in Poly(3‐hexylthiophene): Fullerene Derivative Blends and its Advantage for Inverted Structure Solar Cells , 2009 .

[17]  Daniel C. Harris,et al.  Symmetry and spectroscopy , 1978 .

[18]  Tae-Woo Lee,et al.  Three‐Dimensional Bulk Heterojunction Morphology for Achieving High Internal Quantum Efficiency in Polymer Solar Cells , 2009 .

[19]  E. Moons,et al.  Morphology and Phase Segregation of Spin-Casted Films of Polyfluorene/PCBM Blends , 2007 .

[20]  Xiong Gong,et al.  Thermally Stable, Efficient Polymer Solar Cells with Nanoscale Control of the Interpenetrating Network Morphology , 2005 .

[21]  David G Lidzey,et al.  Depletion of PCBM at the Cathode Interface in P3HT/PCBM Thin Films as Quantified via Neutron Reflectivity Measurements , 2010, Advanced materials.

[22]  Yang Yang,et al.  High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends , 2005 .

[23]  G. Jellison,et al.  Parameterization of the optical functions of amorphous materials in the interband region , 1996 .

[24]  Byung-Kwan Yu,et al.  Time‐Dependent Morphology Evolution by Annealing Processes on Polymer:Fullerene Blend Solar Cells , 2009 .

[25]  Harald Ade,et al.  A Quantitative Study of PCBM Diffusion during Annealing of P3HT:PCBM Blend Films , 2009 .

[26]  F. Liu,et al.  Bulk heterojunction photovoltaic active layers via bilayer interdiffusion. , 2011, Nano letters.

[27]  Yongfang Li,et al.  Combination of indene-C60 bis-adduct and cross-linked fullerene interlayer leading to highly efficient inverted polymer solar cells. , 2010, Journal of the American Chemical Society.

[28]  J. D’Haen,et al.  Tuning the Dimensions of C60‐Based Needlelike Crystals in Blended Thin Films , 2006 .

[29]  S. Logothetidis,et al.  Bonding structure of carbon nitride films by infrared ellipsometry , 2001 .

[30]  Stergios Logothetidis,et al.  Flexible organic electronic devices: Materials, process and applications , 2008 .

[31]  Jenny Nelson,et al.  Morphology evolution via self-organization and lateral and vertical diffusion in polymer:fullerene solar cell blends. , 2008, Nature materials.

[32]  Oliver Ambacher,et al.  Relation between absorption and crystallinity of poly(3-hexylthiophene)/fullerene films for plastic solar cells , 2006 .

[33]  Niyazi Serdar Sariciftci,et al.  Effects of Postproduction Treatment on Plastic Solar Cells , 2003 .

[34]  Jin Young Kim,et al.  Processing additives for improved efficiency from bulk heterojunction solar cells. , 2008, Journal of the American Chemical Society.

[35]  R. Azzam,et al.  Ellipsometry and polarized light , 1977 .

[36]  D. E. Motaung,et al.  Investigation of the effects of substrate annealing on the properties of polymer blends , 2010 .

[37]  H. Tsuji,et al.  Surface segregation at the aluminum interface of poly(3-hexylthiophene)/ fullerene solar cells , 2010 .

[38]  Guangming Wang,et al.  Thermal annealing-induced enhancement of the field-effect mobility of regioregular poly(3-hexylthiophene) films , 2006 .

[39]  B. Cullity,et al.  Elements of X-ray diffraction , 1957 .

[40]  R. J. Kline,et al.  Molecular Characterization of Organic Electronic Films , 2011, Advanced materials.

[41]  Niyazi Serdar Sariciftci,et al.  Morphology of polymer/fullerene bulk heterojunction solar cells , 2006 .

[42]  Alex K.-Y. Jen,et al.  Interfacial modification to improve inverted polymer solar cells , 2008 .

[43]  Vladimir Dyakonov,et al.  Polymer–fullerene bulk heterojunction solar cells , 2010, 1003.0359.

[44]  Craig J. Hawker,et al.  Interdiffusion of PCBM and P3HT Reveals Miscibility in a Photovoltaically Active Blend , 2011 .

[45]  Mats Andersson,et al.  Vertical phase separation in spin-coated films of a low bandgap polyfluorene/PCBM blend—Effects of specific substrate interaction , 2007 .

[46]  S. Logothetidis,et al.  Optical properties of hybrid polymers as barrier materials , 2009 .

[47]  Sung-Hwan Han,et al.  Effect of solvents on the performance and morphology of polymer photovoltaic devices , 2010 .

[48]  Gang Li,et al.  Effects of Solvent Mixtures on the Nanoscale Phase Separation in Polymer Solar Cells , 2008 .

[49]  Jean M. J. Fréchet,et al.  Dependence of Regioregular Poly(3-hexylthiophene) Film Morphology and Field-Effect Mobility on Molecular Weight , 2005 .

[50]  P. Blom,et al.  Charge transfer dynamics in polymer-fullerene blends for efficient solar cells. , 2009, The journal of physical chemistry. B.

[51]  Alan J. Heeger,et al.  Spatial Fourier‐Transform Analysis of the Morphology of Bulk Heterojunction Materials Used in “Plastic” Solar Cells , 2007 .

[52]  I. Alexandrou,et al.  Ultrafast carrier dynamics on conjugated poly(3-hexylthiophene)/[6,6]-phenylC61-butyric acid methyl ester composites , 2007 .

[53]  D. Bradley,et al.  Real‐Time Investigation of Crystallization and Phase‐Segregation Dynamics in P3HT:PCBM Solar Cells During Thermal Annealing , 2011 .

[54]  E. Chibowski,et al.  Problems of contact angle and solid surface free energy determination. , 2002, Advances in colloid and interface science.

[55]  K. Sulaiman,et al.  Solvent effect on the thin film formation of polymeric solar cells , 2009 .

[56]  Eugene A. Irene,et al.  Handbook of Ellipsometry , 2005 .