Assessment of the interchannel mixing model with a subchannel analysis code for BWR and PWR conditions

[1]  Paul N. Somerville.  Tables for Obtaining Non-parametric Tolerance Limits , 1958 .

[2]  D. B. Owen.  FACTORS FOR ONE-SIDED TOLERANCE LIMITS AND FOR VARIABLES SAMPLING PLANS , 1963 .

[3]  S. Levy,et al.  Prediction of Two-Phase Pressure Drop and Density Distribution From Mixing Length Theory , 1963 .

[4]  C. W. Angle,et al.  CROSSFLOW MIXING BETWEEN PARALLEL FLOW CHANNELS DURING BOILING. PART II. MEASUREMENT OF FLOW AND ENTHALPY IN TWO PARALLEL CHANNELS. , 1967 .

[5]  S. Levy.  Forced convection subcooled boiling—prediction of vapor volumetric fraction , 1967 .

[6]  Ulrich Grigull,et al.  Progress in heat and mass transfer , 1969 .

[7]  G. Wallis.  One Dimensional Two-Phase Flow , 1969 .

[8]  B. S. Shiralkar,et al.  Two-phase flow and heat transfer in multirod geometries: subchannel and pressure drop measurements in a nine-rod bundle for diabatic and adiabatic conditions , 1970 .

[9]  B. S. Shiralkar,et al.  OUT-OF-PILE SUBCHANNEL MEASUREMENTS IN A NINE-ROD BUNDLE FOR WATER AT 1000 PSIA , 1972 .

[10]  R. J. Cena,et al.  COBRA-IV-I: an interim version of COBRA for thermal-hydraulic analysis of rod bundle nuclear fuel elements and cores , 1976 .

[11]  F. J. Moody,et al.  The thermal hydraulics of a boiling water nuclear reactor , 1977 .

[12]  M. Carelli.  Turbulent Forced Convection in Channels and Bundles , 1981 .

[13]  W. Hufschmidt,et al.  Experimental investigation of the enthalpy and mass flow distribution in 16-rod clusters with BWR-PWR geometries and conditions , 1981 .

[14]  Kazimi,et al.  THERMIT-2: a two-fluid model for light water reactor subchannel transient analysis. Final report , 1981 .

[15]  J. E. Hench,et al.  Correlation of critical heat flux data for application to boiling water reactor conditions. Final report , 1981 .

[16]  John C. Courtney,et al.  Nuclear Energy Technology: Theory and Practice of Commercial Nuclear Power , 1982 .

[17]  D. G. Reddy,et al.  Parametric study of CHF data. Volume 3, Part 1. Critical heat flux data. Final report , 1982 .

[18]  D. G. Reddy,et al.  Parametric study of CHF data. Volume 2. A generalized subchannel CHF correlation for PWR and BWR fuel assemblies. Final report , 1983 .

[19]  P. B. Whalley,et al.  Flow patterns in vertical two-phase flow , 1985 .

[20]  D. Groeneveld,et al.  1986 AECL-UO Critical Heat Flux Lookup Table , 1986 .

[21]  L. Wolf,et al.  Comprehensive assessment of the Ispra BWR and PWR subchannel experiments and code analysis with different two-phase models and solution schemes , 1987 .

[22]  J. M. Healzer,et al.  A void fraction correlation for generalized applications , 1992 .

[23]  Alberto Teyssedou,et al.  The effect of turbulent mixing models on the predictions of subchannel codes , 1994 .

[24]  Akimaro Kawahara,et al.  Flow redistribution due to void drift in two-phase flow in a multiple channel consisting of two subchannels , 1994 .

[25]  Dae-Hyun Hwang,et al.  Evaluation of the Thermal Margin in a KOFA-Loaded Core by a Multichannel Analysis Methodology , 1995 .

[26]  Neil E. Todreas,et al.  Consideration of critical heat flux margin prediction by subcooled or low quality critical heat flux correlations , 1996 .

[27]  E. Royer,et al.  The 1995 look-up table for critical heat flux in tubes , 1996 .

[28]  Soon Heung Chang,et al.  Assessment of a tube-based bundle CHF prediction method using a subchannel code , 1998 .

[29]  Dong-Seong Sohn,et al.  Development of a Subchannel Analysis Code MATRA Applicable to PWRs and ALWRs , 1999 .