Rechargeable lithium-sulfur batteries.

[1]  A. Hayashi,et al.  Preparation of composite electrode with Li2S–P2S5 glasses as active materials for all-solid-state lithium secondary batteries , 2014 .

[2]  A. Manthiram,et al.  A natural carbonized leaf as polysulfide diffusion inhibitor for high-performance lithium-sulfur battery cells. , 2014, ChemSusChem.

[3]  A. Manthiram,et al.  High-Performance Li-S Batteries with an Ultra-lightweight MWCNT-Coated Separator. , 2014, The journal of physical chemistry letters.

[4]  A. Manthiram,et al.  A hierarchical carbonized paper with controllable thickness as a modulable interlayer system for high performance Li-S batteries. , 2014, Chemical communications.

[5]  H. Althues,et al.  Carbon‐Based Anodes for Lithium Sulfur Full Cells with High Cycle Stability , 2014 .

[6]  A. Manthiram,et al.  Carbonized Eggshell Membrane as a Natural Polysulfide Reservoir for Highly Reversible Li‐S Batteries , 2014, Advanced materials.

[7]  Kai Xie,et al.  Characterization of the solid electrolyte interphase on lithium anode for preventing the shuttle mechanism in lithium–sulfur batteries , 2014 .

[8]  A. Manthiram,et al.  Li2S‐Carbon Sandwiched Electrodes with Superior Performance for Lithium‐Sulfur Batteries , 2014 .

[9]  A. Manthiram,et al.  Low-cost, porous carbon current collector with high sulfur loading for lithium–sulfur batteries , 2014 .

[10]  Shaogang Wang,et al.  A Graphene–Pure‐Sulfur Sandwich Structure for Ultrafast, Long‐Life Lithium–Sulfur Batteries , 2014, Advanced materials.

[11]  Ming Jia,et al.  Nickel foam as interlayer to improve the performance of lithium–sulfur battery , 2014, Journal of Solid State Electrochemistry.

[12]  Arumugam Manthiram,et al.  A strategic approach to recharging lithium-sulphur batteries for long cycle life , 2013, Nature Communications.

[13]  Li-Jun Wan,et al.  Lithium-sulfur batteries: electrochemistry, materials, and prospects. , 2013, Angewandte Chemie.

[14]  Wook Ki Jung,et al.  Encapsulated Monoclinic Sulfur for Stable Cycling of Li–S Rechargeable Batteries , 2013, Advanced materials.

[15]  Chunsheng Wang,et al.  In situ formed lithium sulfide/microporous carbon cathodes for lithium-ion batteries. , 2013, ACS nano.

[16]  A. Manthiram,et al.  In situ-formed Li2S in lithiated graphite electrodes for lithium-sulfur batteries. , 2013, Journal of the American Chemical Society.

[17]  U. Paik,et al.  3D cross-linked nanoweb architecture of binder-free TiO(2) electrodes for lithium ion batteries. , 2013, ACS applied materials & interfaces.

[18]  Guohua Chen,et al.  Graphene-encapsulated sulfur (GES) composites with a core???shell structure as superior cathode materials for lithium???sulfur batteries , 2013 .

[19]  Jae-Hun Kim,et al.  Metallic anodes for next generation secondary batteries. , 2013, Chemical Society reviews.

[20]  Jung Tae Lee,et al.  Enhancing performance of Li–S cells using a Li–Al alloy anode coating , 2013 .

[21]  Min-Kyu Song,et al.  A long-life, high-rate lithium/sulfur cell: a multifaceted approach to enhancing cell performance. , 2013, Nano letters.

[22]  Yingchao Yu,et al.  Yolk-shell structure of polyaniline-coated sulfur for lithium-sulfur batteries. , 2013, Journal of the American Chemical Society.

[23]  Bruno Scrosati,et al.  Recent progress and remaining challenges in sulfur-based lithium secondary batteries--a review. , 2013, Chemical communications.

[24]  Kefei Li,et al.  Mesoporous graphene paper immobilised sulfur as a flexible electrode for lithium–sulfur batteries , 2013 .

[25]  Xufeng Zhou,et al.  Sulfur/Carbon Nanotube Composite Film as a Flexible Cathode for Lithium–Sulfur Batteries , 2013 .

[26]  Taeeun Yim,et al.  Effect of chemical reactivity of polysulfide toward carbonate-based electrolyte on the electrochemical performance of Li–S batteries , 2013 .

[27]  A. Manthiram,et al.  Lithium–sulfur batteries with superior cycle stability by employing porous current collectors , 2013 .

[28]  Kaoru Dokko,et al.  Ionic Liquid Electrolytes for Lithium–Sulfur Batteries , 2013 .

[29]  Kaoru Dokko,et al.  Anionic Effects on Solvate Ionic Liquid Electrolytes in Rechargeable Lithium–Sulfur Batteries , 2013 .

[30]  Linda F. Nazar,et al.  Sulfur Speciation in Li–S Batteries Determined by Operando X-ray Absorption Spectroscopy , 2013 .

[31]  K. Edström,et al.  Why PEO as a binder or polymer coating increases capacity in the Li-S system. , 2013, Chemical communications.

[32]  H. Byon,et al.  N-Methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide-based organic electrolyte for high performance lithium–sulfur batteries , 2013 .

[33]  Céline Barchasz,et al.  New insight into the working mechanism of lithium-sulfur batteries: in situ and operando X-ray diffraction characterization. , 2013, Chemical communications.

[34]  A. Manthiram,et al.  Nano-cellular carbon current collectors with stable cyclability for Li–S batteries , 2013 .

[35]  A. Manthiram,et al.  Hydroxylated Graphene–Sulfur Nanocomposites for High‐Rate Lithium–Sulfur Batteries , 2013 .

[36]  M. Winter,et al.  Carbon coated lithium sulfide particles for lithium battery cathodes , 2013 .

[37]  M. Engelhard,et al.  Molecular structures of polymer/sulfur composites for lithium–sulfur batteries with long cycle life , 2013 .

[38]  A. Hirsch,et al.  Sulfur species in graphene oxide. , 2013, Chemistry.

[39]  Zhan Lin,et al.  Lithium polysulfidophosphates: a family of lithium-conducting sulfur-rich compounds for lithium-sulfur batteries. , 2013, Angewandte Chemie.

[40]  Lian Gao,et al.  Free-standing and binder-free lithium-ion electrodes based on robust layered assembly of graphene and Co3O4 nanosheets. , 2013, Nanoscale.

[41]  Ilias Belharouak,et al.  Role of Polysulfides in Self‐Healing Lithium–Sulfur Batteries , 2013 .

[42]  Jiaqi Huang,et al.  Aligned sulfur-coated carbon nanotubes with a polyethylene glycol barrier at one end for use as a high efficiency sulfur cathode , 2013 .

[43]  Arumugam Manthiram,et al.  Highly reversible lithium/dissolved polysulfide batteries with carbon nanotube electrodes. , 2013, Angewandte Chemie.

[44]  A. Manthiram,et al.  Fast, reversible lithium storage with a sulfur/long-chain-polysulfide redox couple. , 2013, Chemistry.

[45]  Shengbo Zhang,et al.  Liquid electrolyte lithium/sulfur battery: Fundamental chemistry, problems, and solutions , 2013 .

[46]  Wei Lu,et al.  Ultrafine Sulfur Nanoparticles in Conducting Polymer Shell as Cathode Materials for High Performance Lithium/Sulfur Batteries , 2013, Scientific Reports.

[47]  A. Manthiram,et al.  Challenges and prospects of lithium-sulfur batteries. , 2013, Accounts of chemical research.

[48]  L. Nazar,et al.  New approaches for high energy density lithium-sulfur battery cathodes. , 2013, Accounts of chemical research.

[49]  Kai Xie,et al.  Electrochemical performance of lithium/sulfur batteries using perfluorinated ionomer electrolyte with lithium sulfonyl dicyanomethide functional groups as functional separator , 2013 .

[50]  Yu-Guo Guo,et al.  Tuning the porous structure of carbon hosts for loading sulfur toward long lifespan cathode materials for Li–S batteries , 2013 .

[51]  Guangyuan Zheng,et al.  A membrane-free lithium/polysulfide semi-liquid battery for large-scale energy storage , 2013 .

[52]  Guangyuan Zheng,et al.  High-performance hollow sulfur nanostructured battery cathode through a scalable, room temperature, one-step, bottom-up approach , 2013, Proceedings of the National Academy of Sciences.

[53]  Bin Liu,et al.  Hierarchical silicon nanowires-carbon textiles matrix as a binder-free anode for high-performance advanced lithium-ion batteries , 2013, Scientific Reports.

[54]  D. Shi,et al.  A conductive polypyrrole-coated, sulfur-carbon nanotube composite for use in lithium-sulfur batteries , 2013 .

[55]  Li-Jun Wan,et al.  Encapsulation of Sulfur in a Hollow Porous Carbon Substrate for Superior Li‐S Batteries with Long Lifespan , 2013 .

[56]  J. Eckert,et al.  Hydrothermal carbon-based nanostructured hollow spheres as electrode materials for high-power lithium-sulfur batteries. , 2013, Physical chemistry chemical physics : PCCP.

[57]  Qiang Sun,et al.  High sulfur loading cathodes fabricated using peapodlike, large pore volume mesoporous carbon for lithium-sulfur battery. , 2013, ACS applied materials & interfaces.

[58]  Guangyuan Zheng,et al.  Nanostructured sulfur cathodes. , 2013, Chemical Society reviews.

[59]  Jiulin Wang,et al.  Carbonyl‐β‐Cyclodextrin as a Novel Binder for Sulfur Composite Cathodes in Rechargeable Lithium Batteries , 2013 .

[60]  Masahiro Tatsumisago,et al.  Electrochemical Performance of All-Solid-State Li/S Batteries with Sulfur-Based Composite Electrodes Prepared by Mechanical Milling at High Temperature , 2013 .

[61]  Li-Jun Wan,et al.  High-safety lithium-sulfur battery with prelithiated Si/C anode and ionic liquid electrolyte , 2013 .

[62]  Nancy J. Dudney,et al.  Phosphorous Pentasulfide as a Novel Additive for High‐Performance Lithium‐Sulfur Batteries , 2013 .

[63]  Hun‐Gi Jung,et al.  An Advanced Lithium‐Sulfur Battery , 2013 .

[64]  M. Watanabe,et al.  Solvent Effect of Room Temperature Ionic Liquids on Electrochemical Reactions in Lithium–Sulfur Batteries , 2013 .

[65]  Kai Xi,et al.  Carbon with hierarchical pores from carbonized metal-organic frameworks for lithium sulphur batteries. , 2013, Chemical communications.

[66]  Shuru Chen,et al.  Exceptional electrochemical performance of rechargeable Li–S batteries with a polysulfide-containing electrolyte , 2013 .

[67]  X. Tao,et al.  Highly mesoporous carbon foams synthesized by a facile, cost-effective and template-free Pechini method for advanced lithium–sulfur batteries , 2013 .

[68]  Michel Armand,et al.  A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries , 2013, Nature Communications.

[69]  W. Cho,et al.  Polysulfide dissolution control: the common ion effect. , 2013, Chemical communications.

[70]  F. Alloin,et al.  Electrochemical properties of ether-based electrolytes for lithium/sulfur rechargeable batteries , 2013 .

[71]  Jiulin Wang,et al.  Nonflammable electrolyte for rechargeable lithium battery with sulfur based composite cathode materials , 2013 .

[72]  Guoqiang Ma,et al.  Flexible self-supporting graphene–sulfur paper for lithium sulfur batteries , 2013 .

[73]  Arumugam Manthiram,et al.  Improved lithium-sulfur cells with a treated carbon paper interlayer. , 2013, Physical chemistry chemical physics : PCCP.

[74]  L. Archer,et al.  Lithium-sulfur battery cathode enabled by lithium-nitrile interaction. , 2013, Journal of the American Chemical Society.

[75]  Takeshi Kobayashi,et al.  All-solid-state Li–sulfur batteries with mesoporous electrode and thio-LISICON solid electrolyte , 2013 .

[76]  Xiaogang Zhang,et al.  Encapsulating sulfur into hierarchically ordered porous carbon as a high-performance cathode for lithium-sulfur batteries. , 2013, Chemistry.

[77]  Guangyuan Zheng,et al.  Sulphur–TiO2 yolk–shell nanoarchitecture with internal void space for long-cycle lithium–sulphur batteries , 2013, Nature Communications.

[78]  L. Archer,et al.  In situ synthesis of lithium sulfide–carbon composites as cathode materials for rechargeable lithium batteries , 2013 .

[79]  Weikun Wang,et al.  Li-B Alloy as Anode Material for Lithium/Sulfur Battery , 2013 .

[80]  Pu Chen,et al.  Effect of Graphene on Sulfur/Polyacrylonitrile Nanocomposite Cathode in High Performance Lithium/Sulfur Batteries , 2013 .

[81]  Thomas A. Yersak,et al.  Electrochemical Evolution of an Iron Sulfide and Sulfur Based Cathode for All-Solid-State Li-Ion Batteries , 2013 .

[82]  N. Choi,et al.  Effect of Fluoroethylene Carbonate on Electrochemical Performances of Lithium Electrodes and Lithium-Sulfur Batteries , 2013 .

[83]  Phillip K. Koech,et al.  Controlled Nucleation and Growth Process of Li2S2/Li2S in Lithium-Sulfur Batteries , 2013 .

[84]  Xueping Gao,et al.  Sulfur-Polypyrrole/Graphene Multi-Composites as Cathode for Lithium-Sulfur Battery , 2013 .

[85]  F. Alloin,et al.  Revisiting TEGDME/DIOX Binary Electrolytes for Lithium/Sulfur Batteries: Importance of Solvation Ability and Additives , 2013 .

[86]  Jean-Marie Tarascon,et al.  Li–S batteries: simple approaches for superior performance , 2013 .

[87]  아루무감 만티람,et al.  Binder-free sulfur-carbon nanotube composite cathodes for rechargeable lithium-sulfur batteries and methods of making the same , 2012 .

[88]  E. Cairns,et al.  Nanostructured Li₂S-C composites as cathode material for high-energy lithium/sulfur batteries. , 2012, Nano letters.

[89]  Jiachun Lu,et al.  Fabrication of conductive polymer-coated sulfur composite cathode materials based on layer-by-layer assembly for rechargeable lithium–sulfur batteries , 2012 .

[90]  Kai Xie,et al.  Application of lithiated Nafion ionomer film as functional separator for lithium sulfur cells , 2012 .

[91]  Arumugam Manthiram,et al.  Lithium–sulphur batteries with a microporous carbon paper as a bifunctional interlayer , 2012, Nature Communications.

[92]  A. Manthiram,et al.  Sulfur-carbon nanocomposite cathodes improved by an amphiphilic block copolymer for high-rate lithium-sulfur batteries. , 2012, ACS applied materials & interfaces.

[93]  Li-Jun Wan,et al.  Spin-coated silicon nanoparticle/graphene electrode as a binder-free anode for high-performance lithium-ion batteries , 2012, Nano Research.

[94]  Lin Gu,et al.  Smaller sulfur molecules promise better lithium-sulfur batteries. , 2012, Journal of the American Chemical Society.

[95]  Arumugam Manthiram,et al.  Self-weaving sulfur-carbon composite cathodes for high rate lithium-sulfur batteries. , 2012, Physical chemistry chemical physics : PCCP.

[96]  Jianjun Li,et al.  Analysis of the synthesis process of sulphur–poly(acrylonitrile)-based cathode materials for lithium batteries , 2012 .

[97]  Xueping Gao,et al.  A Polyaniline‐Coated Sulfur/Carbon Composite with an Enhanced High‐Rate Capability as a Cathode Material for Lithium/Sulfur Batteries , 2012 .

[98]  Shi-Gang Sun,et al.  A composite material of uniformly dispersed sulfur on reduced graphene oxide: Aqueous one-pot synthesis, characterization and excellent performance as the cathode in rechargeable lithium-sulfur batteries , 2012, Nano Research.

[99]  Feng Li,et al.  A flexible nanostructured sulphur–carbon nanotube cathode with high rate performance for Li-S batteries , 2012 .

[100]  X. Lou,et al.  Confining sulfur in double-shelled hollow carbon spheres for lithium-sulfur batteries. , 2012, Angewandte Chemie.

[101]  Linda F. Nazar,et al.  Understanding the Nature of Absorption/Adsorption in Nanoporous Polysulfide Sorbents for the Li–S Battery , 2012 .

[102]  Yi Cui,et al.  High-capacity micrometer-sized Li2S particles as cathode materials for advanced rechargeable lithium-ion batteries. , 2012, Journal of the American Chemical Society.

[103]  K. Pinkwart,et al.  Lithium–sulphur batteries – binder free carbon nanotubes electrode examined with various electrolytes , 2012 .

[104]  Arumugam Manthiram,et al.  A facile in situ sulfur deposition route to obtain carbon-wrapped sulfur composite cathodes for lithium-sulfur batteries , 2012 .

[105]  Arumugam Manthiram,et al.  A new approach to improve cycle performance of rechargeable lithium-sulfur batteries by inserting a free-standing MWCNT interlayer. , 2012, Chemical communications.

[106]  A. Manthiram,et al.  Enhanced Cyclability of Lithium–Sulfur Batteries by a Polymer Acid-Doped Polypyrrole Mixed Ionic–Electronic Conductor , 2012 .

[107]  Jean Dijon,et al.  Novel positive electrode architecture for rechargeable lithium/sulfur batteries , 2012 .

[108]  Shengbo Zhang,et al.  A proof-of-concept lithium/sulfur liquid battery with exceptionally high capacity density , 2012 .

[109]  A. Manthiram,et al.  Core-shell structured sulfur-polypyrrole composite cathodes for lithium-sulfur batteries , 2012 .

[110]  Yan Zhao,et al.  One-step synthesis of branched sulfur/polypyrrole nanocomposite cathode for lithium rechargeable batteries , 2012 .

[111]  Shengdi Zhang.  Role of LiNO3 in rechargeable lithium/sulfur battery , 2012 .

[112]  Feng Li,et al.  A microporous-mesoporous carbon with graphitic structure for a high-rate stable sulfur cathode in carbonate solvent-based Li-S batteries. , 2012, Physical chemistry chemical physics : PCCP.

[113]  Xin-bo Zhang,et al.  Facile and effective synthesis of reduced graphene oxide encapsulated sulfur via oil/water system for high performance lithium sulfur cells , 2012 .

[114]  Z. Wen,et al.  A composite of sulfur and polypyrrole–multi walled carbon combinatorial nanotube as cathode for Li/S battery , 2012 .

[115]  Jiulin Wang,et al.  Polyacrylonitrile/graphene composite as a precursor to a sulfur-based cathode material for high-rate rechargeable Li–S batteries , 2012 .

[116]  A. Hayashi,et al.  High-capacity Li2S–nanocarbon composite electrode for all-solid-state rechargeable lithium batteries , 2012 .

[117]  Sébastien Patoux,et al.  Lithium/sulfur cell discharge mechanism: an original approach for intermediate species identification. , 2012, Analytical chemistry.

[118]  Arumugam Manthiram,et al.  Orthorhombic Bipyramidal Sulfur Coated with Polypyrrole Nanolayers As a Cathode Material for Lithium–Sulfur Batteries , 2012 .

[119]  L. Nazar,et al.  Spherical ordered mesoporous carbon nanoparticles with high porosity for lithium-sulfur batteries. , 2012, Angewandte Chemie.

[120]  Michael F Toney,et al.  In Operando X-ray diffraction and transmission X-ray microscopy of lithium sulfur batteries. , 2012, Journal of the American Chemical Society.

[121]  Guangbin Ji,et al.  High-rate lithium-sulfur batteries promoted by reduced graphene oxide coating. , 2012, Chemical communications.

[122]  Qian Zhang,et al.  A hierarchical architecture S/MWCNT nanomicrosphere with large pores for lithium sulfur batteries. , 2012, Physical chemistry chemical physics : PCCP.

[123]  J. Tübke,et al.  High capacity vertical aligned carbon nanotube/sulfur composite cathodes for lithium-sulfur batteries. , 2012, Chemical communications.

[124]  Shizhao Xiong,et al.  Oxidation process of polysulfides in charge process for lithium–sulfur batteries , 2012, Ionics.

[125]  Jun Liu,et al.  A Soft Approach to Encapsulate Sulfur: Polyaniline Nanotubes for Lithium‐Sulfur Batteries with Long Cycle Life , 2012, Advanced materials.

[126]  Bruno Scrosati,et al.  A contribution to the progress of high energy batteries: A metal-free, lithium-ion, silicon-sulfur battery , 2012 .

[127]  Jeffrey Read,et al.  A new direction for the performance improvement of rechargeable lithium/sulfur batteries , 2012 .

[128]  G. Stucky,et al.  Spatially heterogeneous carbon-fiber papers as surface dendrite-free current collectors for lithium deposition , 2012 .

[129]  B. Jang,et al.  Reviving rechargeable lithium metal batteries: enabling next-generation high-energy and high-power cells , 2012 .

[130]  L. Nazar,et al.  Graphene-enveloped sulfur in a one pot reaction: a cathode with good coulombic efficiency and high practical sulfur content. , 2012, Chemical communications.

[131]  Shengbo Zhang.  Binder Based on Polyelectrolyte for High Capacity Density Lithium/Sulfur Battery , 2012 .

[132]  Shengbo Zhang,et al.  Effect of Discharge Cutoff Voltage on Reversibility of Lithium/Sulfur Batteries with LiNO3-Contained Electrolyte , 2012 .

[133]  A. Manthiram,et al.  Sulfur-Polypyrrole Composite Cathodes for Lithium-Sulfur Batteries , 2012 .

[134]  Doron Aurbach,et al.  Rechargeable lithiated silicon–sulfur (SLS) battery prototypes , 2012 .

[135]  Pu Chen,et al.  Ternary sulfur/polyacrylonitrile/Mg0.6Ni0.4O composite cathodes for high performance lithium/sulfur batteries , 2012 .

[136]  Xie Kai,et al.  Effect of LiBOB as additive on electrochemical properties of lithium–sulfur batteries , 2012, Ionics.

[137]  Jean-Marie Tarascon,et al.  Li-O2 and Li-S batteries with high energy storage. , 2011, Nature materials.

[138]  Doron Aurbach,et al.  Sulfur‐Impregnated Activated Carbon Fiber Cloth as a Binder‐Free Cathode for Rechargeable Li‐S Batteries , 2011, Advanced materials.

[139]  Lei Wang,et al.  Porous carbon nanofiber–sulfur composite electrodes for lithium/sulfur cells , 2011 .

[140]  Jie Gao,et al.  Effects of Liquid Electrolytes on the Charge–Discharge Performance of Rechargeable Lithium/Sulfur Batteries: Electrochemical and in-Situ X-ray Absorption Spectroscopic Studies , 2011 .

[141]  Li Li,et al.  Improvement of Rate and Cycle Performence by Rapid Polyaniline Coating of a MWCNT/Sulfur Cathode , 2011 .

[142]  Yi Cui,et al.  Improving the performance of lithium-sulfur batteries by conductive polymer coating. , 2011, ACS nano.

[143]  M. Buchmeiser,et al.  Structure-Related Electrochemistry of Sulfur-Poly(acrylonitrile) Composite Cathode Materials for Rechargeable Lithium Batteries , 2011 .

[144]  Jun Liu,et al.  Optimization of mesoporous carbon structures for lithium–sulfur battery applications , 2011 .

[145]  Chunsheng Wang,et al.  Sulfur-impregnated disordered carbon nanotubes cathode for lithium-sulfur batteries. , 2011, Nano letters.

[146]  Guangyuan Zheng,et al.  Hollow carbon nanofiber-encapsulated sulfur cathodes for high specific capacity rechargeable lithium batteries. , 2011, Nano letters.

[147]  Yuki Kato,et al.  A lithium superionic conductor. , 2011, Nature materials.

[148]  Lin Lu,et al.  Sulfur-graphene composite for rechargeable lithium batteries , 2011 .

[149]  Z. Wen,et al.  A nano-structured and highly ordered polypyrrole-sulfur cathode for lithiumsulfur batteries , 2011 .

[150]  L. Nazar,et al.  High “C” rate Li-S cathodes: sulfur imbibed bimodal porous carbons , 2011 .

[151]  Lixia Yuan,et al.  Enhanced Cyclability for Sulfur Cathode Achieved by a Water-Soluble Binder , 2011 .

[152]  Yi Cui,et al.  Prelithiated silicon nanowires as an anode for lithium ion batteries. , 2011, ACS nano.

[153]  H. Dai,et al.  Graphene-wrapped sulfur particles as a rechargeable lithium-sulfur battery cathode material with high capacity and cycling stability. , 2011, Nano letters.

[154]  L. Archer,et al.  Porous hollow carbon@sulfur composites for high-power lithium-sulfur batteries. , 2011, Angewandte Chemie.

[155]  Z. Wen,et al.  Preparation and characterization of sulfur–polypyrrole composites with controlled morphology as high capacity cathode for lithium batteries , 2011 .

[156]  Yaqin Huang,et al.  Improve Rate Capability of the Sulfur Cathode Using a Gelatin Binder , 2011 .

[157]  Xiulei Ji,et al.  Stabilizing lithium-sulphur cathodes using polysulphide reservoirs. , 2011, Nature communications.

[158]  Jiulin Wang,et al.  \{CNT\} enhanced sulfur composite cathode material for high rate lithium battery , 2011 .

[159]  Jiulin Wang,et al.  A novel pyrolyzed polyacrylonitrile-sulfur@MWCNT composite cathode material for high-rate rechargeable lithium/sulfur batteries , 2011 .

[160]  Zhenguo Yang,et al.  Sandwich-type functionalized graphene sheet-sulfur nanocomposite for rechargeable lithium batteries. , 2011, Physical chemistry chemical physics : PCCP.

[161]  Jun Jin,et al.  Highly dispersed sulfur in ordered mesoporous carbon sphere as a composite cathode for rechargeable , 2011 .

[162]  Li Li,et al.  Sulfur/Polythiophene with a Core/Shell Structure: Synthesis and Electrochemical Properties of the Cathode for Rechargeable Lithium Batteries , 2011 .

[163]  Shuru Chen,et al.  Ordered mesoporous carbon/sulfur nanocomposite of high performances as cathode for lithium–sulfur battery , 2011 .

[164]  Jun Liu,et al.  Electrochemical energy storage for green grid. , 2011, Chemical reviews.

[165]  Weikun Wang,et al.  Pig bone derived hierarchical porous carbon and its enhanced cycling performance of lithium–sulfur batteries , 2011 .

[166]  Sehee Lee,et al.  High Power Nanocomposite TiS2 Cathodes for All-Solid-State Lithium Batteries , 2011 .

[167]  A. Manthiram,et al.  High Capacity Li [ Li0.2Mn0.54Ni0.13Co0.13 ] O2 – VO2 ( B ) Composite Cathodes with Controlled Irreversible Capacity Loss for Lithium-Ion Batteries , 2011 .

[168]  Bruno Scrosati,et al.  Moving to a Solid‐State Configuration: A Valid Approach to Making Lithium‐Sulfur Batteries Viable for Practical Applications , 2010, Advanced materials.

[169]  Z. Qian,et al.  The preparation of nano-sulfur/MWCNTs and its electrochemical performance , 2010 .

[170]  L. Nazar,et al.  Advances in Li–S batteries , 2010 .

[171]  Hiroshi Senoh,et al.  All-Solid-State Lithium Secondary Battery with Li2S – C Composite Positive Electrode Prepared by Spark-Plasma-Sintering Process , 2010 .

[172]  M. Zheng,et al.  Preparation and performance of a core–shell carbon/sulfur material for lithium/sulfur battery , 2010 .

[173]  Xueping Gao,et al.  Enhancement of long stability of sulfur cathode by encapsulating sulfur into micropores of carbon spheres , 2010 .

[174]  R. Ruoff,et al.  Graphene and Graphene Oxide: Synthesis, Properties, and Applications , 2010, Advanced materials.

[175]  Jae-Hun Kim,et al.  Li-alloy based anode materials for Li secondary batteries. , 2010, Chemical Society reviews.

[176]  Shichao Zhang,et al.  Preparation and enhanced electrochemical properties of nano-sulfur/poly(pyrrole-co-aniline) cathode material for lithium/sulfur batteries , 2010 .

[177]  Hiroshi Senoh,et al.  Preparation of electrochemically active lithium sulfide-carbon composites using spark-plasma-sintering process , 2010 .

[178]  Yaqin Huang,et al.  Influence of pH of Gelatin Solution on Cycle Performance of the Sulfur Cathode , 2010 .

[179]  Feng Wu,et al.  Sulfur–Polythiophene Composite Cathode Materials for Rechargeable Lithium Batteries , 2010 .

[180]  G. Yushin,et al.  High-performance lithium-ion anodes using a hierarchical bottom-up approach. , 2010, Nature materials.

[181]  Bruno Scrosati,et al.  A high-performance polymer tin sulfur lithium ion battery. , 2010, Angewandte Chemie.

[182]  Yi Cui,et al.  New nanostructured Li2S/silicon rechargeable battery with high specific energy. , 2010, Nano letters.

[183]  J. Goodenough,et al.  Challenges for Rechargeable Li Batteries , 2010 .

[184]  Xuejie Huang,et al.  Research on Advanced Materials for Li‐ion Batteries , 2009 .

[185]  C. Liang,et al.  Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery , 2009 .

[186]  Doron Aurbach,et al.  On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries , 2009 .

[187]  Yaqin Huang,et al.  Structural change of the porous sulfur cathode using gelatin as a binder during discharge and charge , 2009 .

[188]  X. Zhang,et al.  Fabrication of porous carbon/Si composite nanofibers as high-capacity battery electrodes , 2009 .

[189]  L. Nazar,et al.  A highly ordered nanostructured carbon-sulphur cathode for lithium-sulphur batteries. , 2009, Nature materials.

[190]  Zhen Zhou,et al.  Preparation and electrochemical properties of sulfur–acetylene black composites as cathode materials , 2009 .

[191]  Jean-Marie Tarascon,et al.  Lithium salt of tetrahydroxybenzoquinone: toward the development of a sustainable Li-ion battery. , 2009, Journal of the American Chemical Society.

[192]  Zaiping Guo,et al.  Investigation of discharge reaction mechanism of lithium|liquid electrolyte|sulfur battery , 2009 .

[193]  Xinping Qiu,et al.  Improvement of cycle property of sulfur-coated multi-walled carbon nanotubes composite cathode for lithium/sulfur batteries , 2009 .

[194]  Xinping Qiu,et al.  New insight into the discharge process of sulfur cathode by electrochemical impedance spectroscopy , 2009 .

[195]  Candace K. Chan,et al.  Crystalline-amorphous core-shell silicon nanowires for high capacity and high current battery electrodes. , 2009, Nano letters.

[196]  Shichao Zhang,et al.  Nano-wire networks of sulfur–polypyrrole composite cathode materials for rechargeable lithium batteries , 2008 .

[197]  Jing Sun,et al.  Application of gelatin as a binder for the sulfur cathode in lithium–sulfur batteries , 2008 .

[198]  Yaqin Huang,et al.  Discharge Process of the Sulfur Cathode with a Gelatin Binder , 2008 .

[199]  Jou-Hyeon Ahn,et al.  Rechargeable lithium/sulfur battery with liquid electrolytes containing toluene as additive , 2008 .

[200]  A. Hayashi,et al.  All-solid-state rechargeable lithium batteries with Li2S as a positive electrode material , 2008 .

[201]  Ryota Watanabe,et al.  All solid-state battery with sulfur electrode and thio-LISICON electrolyte , 2008 .

[202]  Preparation and electrochemical characterization of the porous sulfur cathode using a gelatin binder , 2008 .

[203]  Elton J. Cairns,et al.  Characterization of N-Methyl-N-Butylpyrrolidinium Bis(trifluoromethanesulfonyl)imide-LiTFSI-Tetra(ethylene glycol) Dimethyl Ether Mixtures as a Li Metal Cell Electrolyte , 2008 .

[204]  R. Piner,et al.  Scanning probe microscopy study of exfoliated oxidized graphene sheets , 2008 .

[205]  Elton J. Cairns,et al.  N-Methyl-(n-butyl)pyrrolidinium bis(trifluoromethanesulfonyl)imide-LiTFSI–poly(ethylene glycol) dimethyl ether mixture as a Li/S cell electrolyte , 2008 .

[206]  Jou-Hyeon Ahn,et al.  Improvement of cycle property of sulfur electrode for lithium/sulfur battery , 2008 .

[207]  K. W. Kim,et al.  Electrochemical properties of sulfur electrode containing nano Al2O3 for lithium/sulfur cell , 2007 .

[208]  Jing Li,et al.  An In Situ X-Ray Diffraction Study of the Reaction of Li with Crystalline Si , 2007 .

[209]  Andre K. Geim,et al.  The rise of graphene. , 2007, Nature materials.

[210]  Mark N. Obrovac,et al.  Reversible Cycling of Crystalline Silicon Powder , 2007 .

[211]  Jou-Hyeon Ahn,et al.  Rechargeable lithium/sulfur battery with suitable mixed liquid electrolytes , 2007 .

[212]  Chunsheng Wang,et al.  Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cells , 2007 .

[213]  M. Ue,et al.  Theoretical Studies on the Reductive Decompositions of Solvents and Additives for Lithium-Ion Batteries near Lithium Anodes , 2006 .

[214]  Junho Ahn,et al.  Self-discharge characteristics of lithium/sulfur batteries using TEGDME liquid electrolyte , 2006 .

[215]  Jun Chen,et al.  Sulphur-polypyrrole composite positive electrode materials for rechargeable lithium batteries , 2006 .

[216]  Roberto Car,et al.  Functionalized single graphene sheets derived from splitting graphite oxide. , 2006, The journal of physical chemistry. B.

[217]  Jou-Hyeon Ahn,et al.  Discharge process of Li/PVdF/S cells at room temperature , 2006 .

[218]  Wenbin Zheng,et al.  Novel nanosized adsorbing sulfur composite cathode materials for the advanced secondary lithium batteries , 2006 .

[219]  Soojin Park,et al.  Effects of imidazolium salts on discharge performance of rechargeable lithium–sulfur cells containing organic solvent electrolytes , 2005 .

[220]  Jun Chen,et al.  Single wall carbon nanotube paper as anode for lithium-ion battery , 2005 .

[221]  Peter G. Bruce,et al.  Lithium‐Ion Intercalation into TiO2‐B Nanowires , 2005 .

[222]  Elton J. Cairns,et al.  Self-discharge of lithium–sulfur cells using stainless-steel current-collectors , 2005 .

[223]  Y·V·米克海利克.  Methods of charging lithium sulfur cells , 2005 .

[224]  Y·V·米克海利克.  Electrolytes for lithium sulfur cells , 2005 .

[225]  Yongju Jung,et al.  The effect of solvent component on the discharge performance of Lithium–sulfur cell containing various organic electrolytes , 2004 .

[226]  Yuriy V. Mikhaylik,et al.  Li/S fundamental chemistry and application to high-performance rechargeable batteries , 2004 .

[227]  Jingying Xie,et al.  Lithium storage in conductive sulfur-containing polymers , 2004 .

[228]  Yuriy V. Mikhaylik,et al.  Polysulfide Shuttle Study in the Li/S Battery System , 2004 .

[229]  M. Whittingham,et al.  Lithium batteries and cathode materials. , 2004, Chemical reviews.

[230]  John R. Reynolds,et al.  Transparent, Conductive Carbon Nanotube Films , 2004, Science.

[231]  T. D. Hatchard,et al.  In Situ XRD and Electrochemical Study of the Reaction of Lithium with Amorphous Silicon , 2004 .

[232]  Yong-Mook Kang,et al.  Effects of Nanosized Adsorbing Material on Electrochemical Properties of Sulfur Cathodes for Li/S Secondary Batteries , 2004 .

[233]  Jing-ying Xie,et al.  All solid-state rechargeable lithium cells based on nano-sulfur composite cathodes , 2004 .

[234]  Mark N. Obrovac,et al.  Structural changes in silicon anodes during lithium insertion/extraction , 2004 .

[235]  Fuminori Mizuno,et al.  All-solid-state Li/S batteries with highly conductive glass–ceramic electrolytes , 2003 .

[236]  Sang-Cheol Han,et al.  Effect of Multiwalled Carbon Nanotubes on Electrochemical Properties of Lithium/Sulfur Rechargeable Batteries , 2003 .

[237]  Zhijun Ling,et al.  Polymer lithium cells with sulfur composites as cathode materials , 2003 .

[238]  Jung-Ki Park,et al.  Electrochemical performance of lithium/sulfur batteries with protected Li anodes , 2003 .

[239]  Hee‐Tak Kim,et al.  Rechargeable Lithium Sulfur Battery I. Structural Change of Sulfur Cathode During Discharge and Charge , 2003 .

[240]  Hee‐Tak Kim,et al.  Rechargeable Lithium Sulfur Battery II. Rate Capability and Cycle Characteristics , 2003 .

[241]  D. Seung,et al.  Cycling a Sulfur Electrode in Electrolytes Based on Sulfolane and Linear Ethers (Glymes) in an LiCF3SO3 Solution , 2002 .

[242]  D. Seung,et al.  Cycling a Sulfur Electrode in Mixed Electrolytes Based on Sulfolane: Effect of Ethers , 2002 .

[243]  Hee‐Tak Kim,et al.  Binary electrolyte based on tetra(ethylene glycol) dimethyl ether and 1,3-dioxolane for lithium-sulfur battery , 2002 .

[244]  Hee‐Tak Kim,et al.  Structural Factors of Sulfur Cathodes with Poly(ethylene oxide) Binder for Performance of Rechargeable Lithium Sulfur Batteries , 2002 .

[245]  J. Shim,et al.  The Lithium/Sulfur Rechargeable Cell Effects of Electrode Composition and Solvent on Cell Performance , 2002 .

[246]  Junho Ahn,et al.  Electrochemical properties and interfacial stability of (PEO)10LiCF3SO3–TinO2n−1 composite polymer electrolytes for lithium/sulfur battery , 2002 .

[247]  Naixin Xu,et al.  A novel conductive polymer-sulfur composite cathode material for rechargeable lithium batteries , 2002 .

[248]  Kwang Man Kim,et al.  Preparation and electrochemical properties of lithium–sulfur polymer batteries , 2002 .

[249]  Nansheng Xu,et al.  Sulfur-carbon nano-composite as cathode for rechargeable lithium battery based on gel electrolyte , 2002 .

[250]  E. Karaseva,et al.  Cycling Lithium–Sulfur Batteries , 2002 .

[251]  Ladislav Kavan,et al.  Facile synthesis of nanocrystalline Li4Ti5O12 (spinel) exhibiting fast Li insertion , 2002 .

[252]  D. Aurbach.  Review of selected electrode–solution interactions which determine the performance of Li and Li ion batteries , 2000 .

[253]  K. Striebel,et al.  Electrochemical performance of lithium/sulfur cells with three different polymer electrolytes , 2000 .

[254]  Yong Liang,et al.  A High Capacity Nano ­ Si Composite Anode Material for Lithium Rechargeable Batteries , 1999 .

[255]  Doron Aurbach,et al.  On the correlation between surface chemistry and performance of graphite negative electrodes for Li ion batteries , 1999 .

[256]  Karim Zaghib,et al.  Electrochemical study of Li4Ti5O12 as negative electrode for Li-ion polymer rechargeable batteries , 1999 .

[257]  T. Brousse,et al.  Amorphous silicon as a possible anode material for Li-ion batteries , 1999 .

[258]  K. Jirage,et al.  Chemical‐Vapor Deposition‐Based Template Synthesis of Microtubular TiS2 Battery Electrodes , 1997 .

[259]  A. Manthiram,et al.  Synthesis of Nanocrystalline VO 2 and Its Electrochemical Behavior in Lithium Batteries , 1997 .

[260]  L. Kavan,et al.  Rocking Chair Lithium Battery Based on Nanocrystalline TiO2 (Anatase) , 1995 .

[261]  S. Licht,et al.  A Solid Sulfur Cathode for Aqueous Batteries , 1993, Science.

[262]  E. Peled,et al.  Lithium‐Sulfur Battery: Evaluation of Dioxolane‐Based Electrolytes , 1989 .

[263]  Emanuel Peled,et al.  Rechargeable lithiumsulfur battery (extended abstract) , 1989 .

[264]  R. J. Boyd,et al.  S-S Bond Lengths, Or can a Bond Length be Estimated from a Single Parameter , 1988 .

[265]  Emanuel Peled,et al.  Lithium Sulfur Battery Oxidation/Reduction Mechanisms of Polysulfides in THF Solutions , 1988 .

[266]  K. P. Lee,et al.  Toxicity of N-methyl-2-pyrrolidone (NMP): Teratogenic, subchronic, and two-year inhalation studies , 1987 .

[267]  Emanuel Peled,et al.  Electrochemistry of a nonaqueous lithium/sulfur cell , 1983 .

[268]  Emanuel Peled,et al.  The Electrochemical Behavior of Alkali and Alkaline Earth Metals in Nonaqueous Battery Systems—The Solid Electrolyte Interphase Model , 1979 .

[269]  K. Abraham,et al.  A Lithium/Dissolved Sulfur Battery with an Organic Electrolyte , 1979 .

[270]  M. Whittingham.  Chemistry of intercalation compounds: Metal guests in chalcogenide hosts , 1979 .

[271]  B. Steele,et al.  Titanium disulphide: A solid solution electrode for sodium and lithium , 1976 .

[272]  J. Besenhard.  The electrochemical preparation and properties of ionic alkali metal-and NR4-graphite intercalation compounds in organic electrolytes , 1976 .

[273]  L. Staudenmaier,et al.  Verfahren zur Darstellung der Graphitsäure , 1898 .