Optimum mix ratio for carbon nanotubes in cement mortar

Cementitious composites have high compressive strength and modulus of elasticity, but relatively low tensile strength, toughness and ductility. They are amenable to enhancement through nanotechnology due to the physical behavior and size of hydration products. Carbon Nanotube (CNT) is a very efficient reinforcing agent due to its extremely high aspect ratio and ultra-high strength. So, there is a high potential to utilize CNT in producing new cement based composite materials. In this study, a parametric experimental investigation was undertaken to determine optimum mix dosage of CNT for cement mortar. Different dosage rates of surface treated Multi-Walled Nanotubes (MWNT), water/cement ratios and plasticizer amounts (as surfactant for the MWNT) were investigated through compressive and flexural strength determinations. A mixing technique was proposed to address the issues related to dispersion of nanotubes within the cement matrix. The proposed mixing technique and design mix significantly enhanced the compressive and flexural strengths, as compared to control samples with no MWNT.

[1]  Raúl Fangueiro,et al.  A review on nanomaterial dispersion, microstructure, and mechanical properties of carbon nanotube and nanofiber reinforced cementitious composites , 2013 .

[2]  R. Ruoff,et al.  Tensile loading of ropes of single wall carbon nanotubes and their mechanical properties , 2000, Physical review letters.

[3]  Nur Yazdani,et al.  Strength Enhancement of Cement Mortar with Carbon Nanotubes , 2010 .

[4]  E. Kwon,et al.  A self-sensing carbon nanotube/cement composite for traffic monitoring , 2009, Nanotechnology.

[5]  Florence Sanchez,et al.  Performance of Carbon Nanofiber–Cement Composites with a High-Range Water Reducer , 2010 .

[6]  Xiaohua Zhao,et al.  Pressure-sensitive properties and microstructure of carbon nanotube reinforced cement composites , 2007 .

[7]  Rashid K. Abu Al-Rub,et al.  Distribution of Carbon Nanofibers and Nanotubes in Cementitious Composites , 2010 .

[8]  J. Ou,et al.  Microstructure of cement mortar with nano-particles , 2004 .

[9]  Vesa Penttala,et al.  Surface decoration of carbon nanotubes and mechanical properties of cement/carbon nanotube composites , 2008 .

[10]  A. Kulik,et al.  Mechanical properties of carbon nanotubes , 1999 .

[11]  Q. X. Jia,et al.  Ultralong single-wall carbon nanotubes , 2004, Nature materials.

[12]  A. Kulik,et al.  Mechanical properties of carbon nanotubes , 1999 .

[13]  A. Gutiérrez-Martínez,et al.  Mortar and Concrete Reinforced with Nanomaterials , 2009 .

[14]  P. Bowen,et al.  Changes in portlandite morphology with solvent composition: Atomistic simulations and experiment , 2011 .

[15]  Jinping Ou,et al.  Multifunctional and Smart Carbon Nanotube Reinforced Cement-Based Materials , 2011 .

[16]  J. Luh,et al.  CARBON NANOTUBE/CEMENT COMPOSITES - EARLY RESULTS AND POTENTIAL APPLICATIONS , 2005 .

[17]  Xianming Shi,et al.  Transport Properties of Carbon-Nanotube/Cement Composites , 2012, Journal of Materials Engineering and Performance.

[18]  Deron A. Walters,et al.  Elastic strain of freely suspended single-wall carbon nanotube ropes , 1999 .

[19]  Giuseppe Andrea Ferro,et al.  Influence of carbon nanotubes structure on the mechanical behavior of cement composites , 2009 .

[20]  G. Chan,et al.  Growth of Cement Hydration Products on Single‐Walled Carbon Nanotubes , 2009 .