Optimal integrated sizing and planning of hubs with midsize/large CHP units considering reliability of supply

Abstract Use of multi-carrier energy systems and the energy hub concept has recently been a widespread trend worldwide. However, most of the related researches specialize in CHP systems with constant electricity/heat ratios and linear operating characteristics. In this paper, integrated energy hub planning and sizing is developed for the energy systems with mid-scale and large-scale CHP units, by taking their wide operating range into consideration. The proposed formulation is aimed at taking the best use of the beneficial degrees of freedom associated with these units for decreasing total costs and increasing reliability. High-accuracy piecewise linearization techniques with approximation errors of about 1% are introduced for the nonlinear two-dimensional CHP input-output function, making it possible to successfully integrate the CHP sizing. Efficient operation of CHP and the hub at contingencies is extracted via a new formulation, which is developed to be incorporated to the planning and sizing problem. Optimal operation, planning, sizing and contingency operation of hub components are integrated and formulated as a single comprehensive MILP problem. Results on a case study with midsize CHPs reveal a 33% reduction in total costs, and it is demonstrated that the proposed formulation ceases the need for additional components/capacities for increasing reliability of supply.

[1]  Pierluigi Siano,et al.  Modeling the reliability of multi-carrier energy systems considering dynamic behavior of thermal loads , 2015 .

[2]  Ali Mohammad Ranjbar,et al.  Financial analysis and optimal size and operation for a multicarrier energy system , 2012 .

[3]  Mahmood Farzaneh-Gord,et al.  Optimal sizing of power generation unit capacity in ICE-driven CCHP systems for various residential building sizes , 2015 .

[4]  Jihong Wang,et al.  Overview of current development in electrical energy storage technologies and the application potential in power system operation , 2015 .

[5]  Matti Lehtonen,et al.  Home load management in a residential energy hub , 2015 .

[6]  José Antônio Perrella Balestieri,et al.  Optimization analysis of dual-purpose systems , 2010 .

[7]  Elnaz Abdollahi,et al.  An optimization method for multi-area combined heat and power production with power transmission network , 2016 .

[8]  Martin Geidl,et al.  Integrated Modeling and Optimization of Multi-Carrier Energy Systems , 2007 .

[9]  M. Moradi-Dalvand,et al.  Optimal Design of Multicarrier Energy Systems Considering Reliability Constraints , 2015, IEEE Transactions on Power Delivery.

[10]  Graham Coates,et al.  Sizing of residential CHP systems , 2011 .

[11]  Ali Reza Seifi,et al.  A new algorithm for combined heat and power dynamic economic dispatch considering valve-point effects , 2013 .

[12]  L. M. Ramirez-Elizondo Optimal Usage of Multiple Energy Carriers in Residential Systems: Unit Scheduling and Power Control , 2013 .

[13]  Hossam A. Gabbar,et al.  Optimal planning of combined heat and power systems within microgrids , 2015 .

[14]  M.-R. Haghifam,et al.  Reliability and availability modelling of combined heat and power (CHP) systems , 2011 .

[15]  Ali Mohammad Ranjbar,et al.  A cloud computing framework on demand side management game in smart energy hubs , 2015 .

[16]  Rajesh Attri,et al.  Development of reliability index for cogeneration cycle power plant using graph theoretic approach , 2014, Int. J. Syst. Assur. Eng. Manag..

[17]  Yang Shi,et al.  Optimal power flow and PGU capacity of CCHP systems using a matrix modeling approach , 2013 .

[18]  Thomas Nuytten,et al.  Flexibility of a combined heat and power system with thermal energy storage for district heating , 2013 .

[19]  Felix A. Farret,et al.  Integration of alternative sources of energy , 2006 .

[20]  Kristina Orehounig,et al.  Integration of decentralized energy systems in neighbourhoods using the energy hub approach , 2015 .

[21]  Heejin Cho,et al.  A probability constrained multi-objective optimization model for CCHP system operation decision support , 2014 .

[22]  Fabricio I. Salgado,et al.  Short-term operation planning on cogeneration systems : A survey , 2008 .

[23]  Alfredo Vaccaro,et al.  A robust optimization approach to energy hub management , 2012 .

[24]  C. S. Chang,et al.  Stochastic multiobjective generation dispatch of combined heat and power systems , 1998 .

[25]  Hamdi Abdi,et al.  A general model for energy hub economic dispatch , 2017 .

[26]  Goran Andersson,et al.  Reliability modeling of multi-carrier energy systems , 2009 .

[27]  Abdullah Abusorrah,et al.  Optimal Expansion Planning of Energy Hub With Multiple Energy Infrastructures , 2015, IEEE Transactions on Smart Grid.

[28]  Ricardo Chacartegui,et al.  Feasibility analysis of a MED desalination plant in a combined cycle based cogeneration facility , 2009 .

[29]  Mayn Tomal,et al.  Optimal planning and operation of CHP within micro energy grids , 2016 .

[30]  Lei Liu,et al.  Environmental co-benefits of energy efficiency improvement in coal-fired power sector: A case study of Henan Province, China , 2016 .

[31]  Mahmoud M. El-Halwagi,et al.  Optimal design of integrated CHP systems for housing complexes , 2015 .

[32]  Sadegh Vaez-Zadeh,et al.  Optimal planning of energy hubs in interconnected energy systems: a case study for natural gas and electricity , 2015 .

[33]  Manijeh Alipour,et al.  Stochastic Scheduling of Renewable and CHP-Based Microgrids , 2015, IEEE Transactions on Industrial Informatics.

[34]  Jan Carmeliet,et al.  New formulations of the ‘energy hub’ model to address operational constraints , 2014 .

[35]  Chris Marnay,et al.  Modeling of Thermal Storage Systems in MILP Distributed Energy Resource Models , 2015 .

[36]  Ryohei Yokoyama,et al.  Optimal structural design of residential power and heat supply devices in consideration of operational and capital recovery constraints , 2016 .

[37]  Zacharias B. Maroulis,et al.  Design of a combined heating, cooling and power system: Sizing, operation strategy selection and parametric analysis , 2010 .

[38]  Congjie Gao,et al.  Optimum design of cogeneration for power and desalination to satisfy the demand of water and power , 2013 .

[39]  J. Contreras,et al.  Transmission Expansion Planning in Electricity Markets , 2008, IEEE Transactions on Power Systems.

[40]  Farouk Fardoun,et al.  Review of tri-generation technologies: Design evaluation, optimization, decision-making, and selection approach , 2016 .

[41]  Sean B. Walker,et al.  Modeling and optimization of a network of energy hubs to improve economic and emission considerations , 2015 .

[42]  Mohammad E. Khodayar,et al.  Resilient operation of multiple energy carrier microgrids , 2015, 2016 IEEE Power and Energy Society General Meeting (PESGM).

[43]  Jonas Allegrini,et al.  A review of modelling approaches and tools for the simulation of district-scale energy systems , 2015 .

[44]  Pierluigi Siano,et al.  Evaluating the reliability of multi-energy source buildings: A new analytical method for considering the dynamic behavior of thermal loads , 2016 .

[45]  Tao Guo,et al.  An algorithm for combined heat and power economic dispatch , 1996 .

[46]  Marija Mandic,et al.  Possibilities of implementation of CHP (combined heat and power) in the wood industry in Serbia , 2012 .

[47]  Xifan Wang,et al.  An MILP-Based Optimal Power Flow in Multicarrier Energy Systems , 2017, IEEE Transactions on Sustainable Energy.

[48]  Jamshid Aghaei,et al.  Multi-objective self-scheduling of CHP (combined heat and power)-based microgrids considering demand response programs and ESSs (energy storage systems) , 2013 .

[49]  Edoardo Amaldi,et al.  A detailed MILP optimization model for combined cooling, heat and power system operation planning , 2014 .

[50]  Hao Yin,et al.  Crisscross optimization algorithm for solving combined heat and power economic dispatch problem , 2015 .

[51]  Ali Reza Seifi,et al.  Energy expansion planning by considering electrical and thermal expansion simultaneously , 2014 .

[52]  Mahmud Fotuhi-Firuzabad,et al.  A Decomposed Solution to Multiple-Energy Carriers Optimal Power Flow , 2014, IEEE Transactions on Power Systems.

[53]  Russell McKenna,et al.  Optimisation of the capacity and the dispatch of decentralised micro-CHP systems: A case study for the UK , 2015 .

[54]  Enrico Carpaneto,et al.  Cogeneration planning under uncertainty. Part II: Decision theory-based assessment of planning alternatives , 2011 .

[55]  C. A. Saldarriaga,et al.  A Holistic Approach for Planning Natural Gas and Electricity Distribution Networks , 2013, IEEE Transactions on Power Systems.

[56]  Carlos M. Correa-Posada,et al.  Security-Constrained Optimal Power and Natural-Gas Flow , 2014, IEEE Transactions on Power Systems.

[57]  Behnam Mohammadi-ivatloo,et al.  Stochastic risk-constrained short-term scheduling of industrial cogeneration systems in the presence of demand response programs , 2014 .

[58]  Ferdinando Salata,et al.  Method for energy optimization with reliability analysis of a trigeneration and teleheating system on urban scale: A case study , 2015 .

[59]  Audrius Bagdanavicius,et al.  Combined analysis of electricity and heat networks , 2014 .

[60]  John Gelegenis,et al.  An analytical study of critical factors in residential cogeneration optimization , 2017 .

[61]  Luca A. Tagliafico,et al.  Implementation of a cogeneration plant for a food processing facility. A case study , 2016 .

[62]  Francesco Melino,et al.  Performance analysis of an integrated CHP system with thermal and Electric Energy Storage for residential application , 2013 .

[63]  Jian Zhang,et al.  Evaluation of financial incentives for combined heat and power (CHP) systems in U.S. regions , 2016 .

[64]  Florian Kienzle,et al.  Valuing Investments in Multi-Energy Conversion, Storage, and Demand-Side Management Systems Under Uncertainty , 2011, IEEE Transactions on Sustainable Energy.

[65]  Ali Mohammad Ranjbar,et al.  Integrated Demand Side Management Game in Smart Energy Hubs , 2015, IEEE Transactions on Smart Grid.