Quantitative analysis of micro structural and conductivity evolution of Ni-YSZ anodes during thermal

a b s t r a c t Understanding the mechanism of degradation in solid oxide fuel cells (SOFCs) using nickel/yttria- stabilized zirconia (Ni-YSZ) as the anode material is very important for the optimization of cell performance. In this work, the effects of thermal cycling on the microstructure of the Ni-YSZ anode are explored using the three-dimensional X-ray nano computed tomography (nano-CT) imaging tech- nique. It is found that the average Ni particle size increased with thermal cycling, which is associated with the decreased connectivity of the Ni phase and the three-phase-boundary (TPB) length. Moreover, the conductivities of the anode samples are also reduced with the increase in thermal cycle times. The implication of these observations is discussed in terms of the relationship between the conductivity and connectivity of the Ni phase. © 2011 Elsevier B.V. All rights reserved.

[1]  J. Van herle,et al.  Nickel–Zirconia Anode Degradation and Triple Phase Boundary Quantification from Microstructural Analysis , 2009 .

[2]  Nigel P. Brandon,et al.  X-ray nano computerised tomography of SOFC electrodes using a focused ion beam sample-preparation technique , 2010 .

[3]  Hongtao Cui,et al.  X-ray computed tomography in Zernike phase contrast mode at 8 keV with 50-nm resolution using Cu rotating anode X-ray source , 2007 .

[4]  Francesco De Carlo,et al.  Nondestructive Nanoscale 3D Elemental Mapping and Analysis of a Solid Oxide Fuel Cell Anode , 2010 .

[5]  Günter Schiller,et al.  SOFC characteristics along the flow path , 2006 .

[6]  P. Shearing,et al.  3D reconstruction of SOFC anodes using a focused ion beam lift-out technique , 2009 .

[7]  Marcio Gameiro,et al.  Quantitative three-dimensional microstructure of a solid oxide fuel cell cathode , 2009 .

[8]  Tomoo Iwata,et al.  Characterization of Ni‐YSZ Anode Degradation for Substrate‐Type Solid Oxide Fuel Cells , 1996 .

[9]  Nigel Sammes,et al.  Performance Degradation of Microtubular SOFCs Operating in the Intermediate-Temperature Range , 2009 .

[10]  Yangchao Tian,et al.  Three-dimensional imaging of a complex concaved cuboctahedron copper sulfide crystal by x-ray nanotomography , 2008 .

[11]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[12]  Werner Lehnert,et al.  Degradation of Solid Oxide Fuel Cell Anodes Due to Sintering of Metal Particles Correlated Percolation Model , 1997 .

[13]  Frank Tietz,et al.  Nickel coarsening in annealed Ni/8YSZ anode substrates for solid oxide fuel cells , 2000 .

[14]  Nguyen Q. Minh,et al.  Science and Technology of Ceramic Fuel Cells , 1995 .

[15]  R. Vaßen,et al.  Modelling of the agglomeration of Ni-particles in anodes of solid oxide fuel cells , 2001 .

[16]  Haiwon Lee,et al.  Fabrication of NiO/YSZ anode material for SOFC via mixed NiO precursors , 2007 .

[17]  Piero Pianetta,et al.  Using X-ray microscopy and Hg L3 XANES to study Hg binding in the rhizosphere of Spartina cordgrass. , 2009, Environmental science & technology.

[18]  Ying Xiong,et al.  The study of the reconstructed three-dimensional structure of a solid-oxide fuel-cell cathode by X-ray nanotomography. , 2010, Journal of synchrotron radiation.

[19]  Q. Shen,et al.  Hard x-ray microscopy with Fresnel zone plates reaches 40 nm Rayleigh resolution. , 2008 .

[20]  Motoaki Tajika,et al.  Kinetics of the electrode reaction at the H[sub 2]-H[sub 2]O porous Pt/stabilized zirconia interface , 1994 .

[21]  Ki Hyun Yoon,et al.  Quantitative analysis of microstructure and its related electrical property of SOFC anode, Ni-YSZ cermet , 2002 .

[22]  F. Tietz,et al.  Interfacial properties and structure stability of Ni/Y2 O3-ZrO2-TiO2 cermet anodes for solid oxide fuel cells , 2005 .

[23]  J. Gelb,et al.  High resolution hard x-ray microscope on a second generation synchrotron source. , 2008, The Review of scientific instruments.

[24]  Ying Xiong,et al.  Analysis of the three-dimensional microstructure of a solid-oxide fuel cell anode using nano X-ray tomography , 2011 .

[25]  Marco Cannarozzo,et al.  Experimental and Theoretical Investigation of Degradation Mechanisms by Particle Coarsening in SOFC Electrodes , 2009 .

[26]  Lin Guo,et al.  Quantitative study of interior nanostructure in hollow zinc oxide particles on the basis of nondestructive x-ray nanotomography , 2009 .

[27]  Rodney S. Ruoff,et al.  Correction factors for 4-probe electrical measurements with finite size electrodes and material anisotropy: a finite element study , 2007 .

[28]  Tohru Yamamoto,et al.  Configurational and Electrical Behavior of Ni‐YSZ Cermet with Novel Microstructure for Solid Oxide Fuel Cell Anodes , 1997 .

[29]  E. Wachsman,et al.  Three-Dimensional Reconstruction of Porous LSCF Cathodes , 2007 .

[30]  A. Tsoga,et al.  Wettability and interfacial reactions in the systems NiYSZ and Ni/Ti-TiO2/YSZ , 1996 .

[31]  Wilson K. S. Chiu,et al.  Nondestructive Reconstruction and Analysis of SOFC Anodes Using X-ray Computed Tomography at Sub-50 nm Resolution , 2008 .

[32]  E. Anderson,et al.  Soft X-ray microscopy at a spatial resolution better than 15 nm , 2005, Nature.

[33]  Hiroshi Iwai,et al.  Quantification of SOFC anode microstructure based on dual beam FIB-SEM technique , 2010 .

[34]  Jon M. Hiller,et al.  Three-dimensional reconstruction of a solid-oxide fuel-cell anode , 2006, Nature materials.

[35]  Y. Hsiao,et al.  The degradation of SOFC electrodes , 1997 .

[36]  U. Stimming,et al.  Advances, aging mechanisms and lifetime in solid-oxide fuel cells , 2004 .