Simulation and analysis of a sugarcane juice evaporation system

Abstract The production of sugar and alcohol is the main objective of the sugarcane processing industry. The evaporation of sugarcane juice has a high energetic cost and is usually performed in multiple-effect evaporators. The loss of performance during operation due to fouling makes the process more complex. In this study, modeling, simulation, validation, and analysis were performed for a sugarcane juice industrial evaporation system (IES) composed of a falling film evaporator followed by three short vertical-tube evaporators arranged in parallel. The IES model was developed using a commercial process simulator and validated with data from the plant. The IES had marked performance losses in the first 14 days of operation, mainly due to fouling in the first effect, with a 30% decrease in the evaporation rate.

[1]  Bipan Bansal,et al.  Analysis of ‘classical’ deposition rate law for crystallisation fouling , 2008 .

[2]  María J. Fernández-Torres,et al.  A theoretical study of freezing fouling : limiting behaviour based on a heat and mass transfer analysis , 2001 .

[3]  C.R.F Pacheco,et al.  Effect of the solute concentration on the performance of evaporators , 1999 .

[4]  E. Hugot,et al.  Handbook of cane sugar engineering , 1972 .

[5]  Yu. M. Volin,et al.  Three phases in the development of computer simulation of chemical engineering systems , 2006 .

[6]  Peter Harriott,et al.  Unit Operations of Chemical Engineering , 2004 .

[7]  Luis M. Serra,et al.  Reduction of irreversibility generation in sugar and ethanol production from sugarcane , 2009 .

[8]  Peter L. Douglas,et al.  Simulation of an agitated thin film evaporator for concentrating orange juice using AspenPlusTM , 2001 .

[9]  Don W. Green,et al.  Perry's Chemical Engineers' Handbook , 2007 .

[10]  Paul E. Minton,et al.  Handbook of Evaporation Technology , 1988 .

[11]  R. Krupiczka,et al.  Heat transfer to evaporating liquid films within a vertical tube , 2002 .

[12]  M. Urbicain,et al.  Determination and correlation of heat transfer coefficients in a falling film evaporator , 2006 .

[13]  L. Frioni,et al.  Experimental results for evaporation of sucrose solution using a climbing/falling film plate evaporator , 2004 .

[14]  Bertrand Heyd,et al.  Experimental results and modeling of boiling heat transfer coefficients in falling film evaporator usable for evaporator design , 2009 .