Alleviated ammonia crossover in thermally regenerative ammonia-based batteries by optimizing the introduced intermediate-chamber

[1]  Jun Yu Li,et al.  Power generation enhancement of a membrane-free thermally regenerative battery induced by the density difference of electrolytes , 2023, Applied Energy.

[2]  Derek M. Hall,et al.  System efficiency and power assessment of the all-aqueous copper thermally regenerative ammonia battery , 2023, Applied Energy.

[3]  Jun Yu Li,et al.  The Coupled Removal of Heavy Metals from Electroplating Wastewater Induced Stable Electricity Generation During Long-Time Discharging in a Three-Chamber Thermally Regenerative Battery , 2023, SSRN Electronic Journal.

[4]  Jun Yu Li,et al.  Ammonia crossover in thermally regenerative ammonia-based batteries for low-grade waste heat recovery , 2022, Journal of Power Sources.

[5]  Jun Yu Li,et al.  Electrical power production of thermally regenerative ammonia-based batteries using reduced graphene oxide modified Ni foam composite electrodes , 2022, Applied Energy.

[6]  Jun Yu Li,et al.  Development of a membrane-less microfluidic thermally regenerative ammonia-based battery towards small-scale low-grade thermal energy recovery , 2022, Applied Energy.

[7]  Zhanhu Guo,et al.  Tellurium intervened Fe-N codoped carbon for improved oxygen reduction reaction and high-performance Zn-air batteries , 2022, Journal of Materials Science & Technology.

[8]  Jun Yu Li,et al.  Graphene oxide modified membrane for alleviated ammonia crossover and improved electricity generation in thermally regenerative batteries , 2022, Chinese Chemical Letters.

[9]  G. Shu,et al.  Progress and prospects for low-grade heat recovery electrochemical technologies , 2022, Sustainable Energy Technologies and Assessments.

[10]  Y. Xuan,et al.  Zinc ion thermal charging cell for low-grade heat conversion and energy storage , 2022, Nature Communications.

[11]  Q. Liao,et al.  Biomass waste-derived hierarchical porous composite electrodes for high-performance thermally regenerative ammonia-based batteries , 2022, Journal of Power Sources.

[12]  Q. Liao,et al.  A fluidized-bed reactor for enhanced mass transfer and increased performance in thermally regenerative batteries for low-grade waste heat recovery , 2021 .

[13]  G. Shu,et al.  Understanding the reaction mechanism and self-discharge of a bimetallic thermally-regenerative ammonia battery , 2021 .

[14]  Q. Liao,et al.  3-D printed gradient porous composite electrodes improve anodic current distribution and performance in thermally regenerative flow battery for low-grade waste heat recovery , 2020 .

[15]  Q. Liao,et al.  Effect of operating parameters on the performance of thermally regenerative ammonia-based battery for low-temperature waste heat recovery , 2020 .

[16]  Q. Liao,et al.  Cu/Ni composite electrodes for increased anodic coulombic efficiency and electrode operation time in a thermally regenerative ammonia-based battery for converting low-grade waste heat into electricity , 2020 .

[17]  G. Shu,et al.  Decoupled electrolytes towards enhanced energy and high temperature performance of thermally regenerative ammonia batteries , 2020 .

[18]  Xiuping Zhu,et al.  High Power Thermally Regenerative Ammonia-Copper Redox Flow Battery Enabled by a Zero Gap Cell Design, Low-Resistant Membranes, and Electrode Coatings , 2020 .

[19]  Q. Liao,et al.  Performance of a thermally regenerative ammonia-based flow battery with 3D porous electrodes: Effect of reactor and electrode design , 2020 .

[20]  G. Shu,et al.  A bimetallic thermally-regenerative ammonia-based flow battery for low-grade waste heat recovery , 2019, Journal of Power Sources.

[21]  Q. Liao,et al.  Copper Foam Electrodes for Increased Power Generation in Thermally Regenerative Ammonia-Based Batteries for Low-Grade Waste Heat Recovery , 2019, Industrial & Engineering Chemistry Research.

[22]  B. Logan,et al.  Improved electrical power production of thermally regenerative batteries using a poly(phenylene oxide) based anion exchange membrane , 2017 .

[23]  Clemens Forman,et al.  Estimating the global waste heat potential , 2016 .

[24]  Xiuping Zhu,et al.  A Thermally-Regenerative Ammonia-Based Flow Battery for Electrical Energy Recovery from Waste Heat. , 2016, ChemSusChem.

[25]  Taewoo Kim,et al.  High-efficiency electrochemical thermal energy harvester using carbon nanotube aerogel sheet electrodes , 2016, Nature Communications.

[26]  Menachem Elimelech,et al.  Membrane-based osmotic heat engine with organic solvent for enhanced power generation from low-grade heat. , 2015, Environmental science & technology.

[27]  Fang Zhang,et al.  Enhancing low-grade thermal energy recovery in a thermally regenerative ammonia battery using elevated temperatures. , 2015, ChemSusChem.

[28]  H. Ghasemi,et al.  An electrochemical system for efficiently harvesting low-grade heat energy , 2014, Nature Communications.

[29]  Gerard F. Jones,et al.  A review of data center cooling technology, operating conditions and the corresponding low-grade waste heat recovery opportunities , 2014 .

[30]  Q. Liao,et al.  Construction of a hierarchical porous surface composite electrode by dynamic hydrogen bubble template electrodeposition for ultrahigh-performance thermally regenerative ammonia-based batteries , 2021 .

[31]  G. Shu,et al.  Analysis and Optimization of Thermally-Regenerative Ammonia-Based Flow Battery Based on a 3-D Model , 2019, Journal of The Electrochemical Society.

[32]  B. Logan,et al.  A thermally regenerative ammonia battery with carbon-silver electrodes for converting low-grade waste heat to electricity , 2018 .

[33]  B. Logan,et al.  A thermally regenerative ammonia-based battery for efficient harvesting of low-grade thermal energy as electrical power , 2015 .