Thienoisoindigo (TIIG)-based small molecules for the understanding of structure–property–device performance correlations

In this contribution, a series of small molecule semiconductors based on the recently conceived thienoisoindigo (TIIG) and three different end-capping moieties (benzene (Bz), naphthalene (Np), and benzofuran (Bf)) with varied electron-donating strength and conformations has been synthesized by Suzuki coupling and utilized for organic photovoltaics (OPVs). Incorporation of different end-capping blocks onto the TIIG core facilitated the tuning of optical properties and the electronic structure (HOMO/LUMO energy levels), solid-state morphology and performance in OPVs. It is apparent that the bandgaps within this series (TIIG-Bz, TIIG-Np, and TIIG-Bf) were progressively red-shifted and the absorption coefficients were enhanced by increasing the conjugation length and/or the donor ability of the end-capping units. In addition, HOMO and LUMO levels were shown to simultaneously follow changes made to the end-capping moieties. The best performing OPVs using TIIG-Np:PC71BM exhibited a power conversion efficiency (PCE) of 1.81% with Jsc = 7.15 mA cm−2, FF = 0.39, and Voc = 0.66 V. With the aim of exploring underlying structure–property relationships for this new class of molecular systems, we have quantitatively investigated various morphological structures in both the pristine small molecule films and small molecule/PC71BM blend films using a combination of grazing incidence wide angle X-ray scattering (GIWAXS) and atomic force microscopy (AFM). In this study, a correlation between the molecular structure, thin film morphology, and photovoltaic properties of these conjugated small molecules was established that provides guidance for the molecular design of new photovoltaic semiconductors based on TIIG units.

[1]  Yongfang Li,et al.  Single‐Junction Polymer Solar Cells Exceeding 10% Power Conversion Efficiency , 2015, Advanced materials.

[2]  Jianhui Hou,et al.  Realizing over 10% efficiency in polymer solar cell by device optimization , 2015, Science China Chemistry.

[3]  Takehiko Mori,et al.  The impact of molecular planarity on electronic devices in thienoisoindigo-based organic semiconductors , 2014 .

[4]  He Yan,et al.  Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells , 2014, Nature Communications.

[5]  Yong-Young Noh,et al.  A thienoisoindigo-naphthalene polymer with ultrahigh mobility of 14.4 cm(2)/V·s that substantially exceeds benchmark values for amorphous silicon semiconductors. , 2014, Journal of the American Chemical Society.

[6]  Yong‐Young Noh,et al.  Benzodipyrrolidone (BDP)-based polymer semiconductors containing a series of chalcogen atoms: comprehensive investigation of the effect of heteroaromatic blocks on intrinsic semiconducting properties. , 2014, ACS applied materials & interfaces.

[7]  P. Müller‐Buschbaum,et al.  Influence of the Position of the Side Chain on Crystallization and Solar Cell Performance of DPP-Based Small Molecules , 2014 .

[8]  H. Ohkita,et al.  Near-Infrared Absorbing Thienoisoindigo-Based Copolymers for Organic Photovoltaics , 2013 .

[9]  Weiwei Li,et al.  Universal correlation between fibril width and quantum efficiency in diketopyrrolopyrrole-based polymer solar cells. , 2013, Journal of the American Chemical Society.

[10]  Joon Hak Oh,et al.  Visible‐Near Infrared Absorbing Polymers Containing Thienoisoindigo and Electron‐Rich Units for Organic Transistors with Tunable Polarity , 2013 .

[11]  J. Fréchet,et al.  Control of Polymer-Packing Orientation in Thin Films through Synthetic Tailoring of Backbone Coplanarity , 2013 .

[12]  Yongfang Li,et al.  Solution-Processable Organic Molecule Photovoltaic Materials with Bithienyl-benzodithiophene Central Unit and Indenedione End Groups , 2013 .

[13]  J. Roncali,et al.  Donor–acceptor–donor (D–A–D) molecules based on isoindigo as active material for organic solar cells , 2013 .

[14]  Thuc‐Quyen Nguyen,et al.  Effects of Heteroatom Substitutions on the Crystal Structure, Film Formation, and Optoelectronic Properties of Diketopyrrolopyrrole‐Based Materials , 2013 .

[15]  Masuki Kawamoto,et al.  Thienoisoindigo-based low-band gap polymers for organic electronic devices , 2013 .

[16]  R. Janssen,et al.  Synthesis and properties of small band gap thienoisoindigo based conjugated polymers , 2012 .

[17]  H. Sirringhaus,et al.  A new thiophene substituted isoindigo based copolymer for high performance ambipolar transistors. , 2012, Chemical communications.

[18]  Yongfang Li.  Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption. , 2012, Accounts of chemical research.

[19]  Claire H. Woo,et al.  Efficient Small Molecule Bulk Heterojunction Solar Cells with High Fill Factors via Pyrene‐Directed Molecular Self‐Assembly , 2011, Advanced materials.

[20]  O. Inganäs,et al.  An easily accessible isoindigo-based polymer for high-performance polymer solar cells. , 2011, Journal of the American Chemical Society.

[21]  Mario Leclerc,et al.  Processable Low-Bandgap Polymers for Photovoltaic Applications† , 2011 .

[22]  Thuc-Quyen Nguyen,et al.  Small Molecule Solution-Processed Bulk Heterojunction Solar Cells† , 2011 .

[23]  Kerry B. Burke,et al.  Vertical Stratification and Interfacial Structure in P3HT:PCBM Organic Solar Cells , 2010 .

[24]  Jianguo Mei,et al.  Synthesis of isoindigo-based oligothiophenes for molecular bulk heterojunction solar cells. , 2010, Organic letters.

[25]  Yang Yang,et al.  Polymer solar cells with enhanced open-circuit voltage and efficiency , 2009 .

[26]  M. Wienk,et al.  Copolymers of Cyclopentadithiophene and Electron‐Deficient Aromatic Units Designed for Photovoltaic Applications , 2009 .

[27]  Thuc-Quyen Nguyen,et al.  Nanoscale Phase Separation and High Photovoltaic Efficiency in Solution‐Processed, Small‐Molecule Bulk Heterojunction Solar Cells , 2009 .

[28]  Chain‐Shu Hsu,et al.  Synthesis of conjugated polymers for organic solar cell applications. , 2009, Chemical reviews.

[29]  Jean Roncali,et al.  Molecular bulk heterojunctions: an emerging approach to organic solar cells. , 2009, Accounts of chemical research.

[30]  V. Mihailetchi,et al.  Space-charge limited photocurrent. , 2005, Physical review letters.

[31]  Joon Hak Oh,et al.  ε‐Branched Flexible Side Chain Substituted Diketopyrrolopyrrole‐Containing Polymers Designed for High Hole and Electron Mobilities , 2015 .

[32]  K. Meerholz,et al.  Tailored merocyanine dyes for solution-processed BHJ solar cells , 2010 .

[33]  J. Fréchet,et al.  Polymer-fullerene composite solar cells. , 2008, Angewandte Chemie.