Tribological and corrosion performance of an atmospheric plasma sprayed AlCoCr0.5Ni high-entropy alloy coating

[1]  F. Ren,et al.  Achieving low wear in a μ-phase reinforced high-entropy alloy and associated subsurface microstructure evolution , 2021 .

[2]  B. S. Murty,et al.  Evaluating the influence of microstructural attributes: Fraction, composition, size and spatial distribution of phases on the oxidation behaviour of high-entropy alloys , 2021 .

[3]  Chao Zhang,et al.  Microstructure and Tribological Properties of Plasma-Sprayed CoCrFeNi-based High-Entropy Alloy Coatings Under Dry and Oil-Lubricated Sliding Conditions , 2021, Journal of Thermal Spray Technology.

[4]  C. Du,et al.  Bulk nanocrystalline boron-doped VNbMoTaW high entropy alloys with ultrahigh strength, hardness, and resistivity , 2021 .

[5]  B. S. Murty,et al.  Multiscale mechanical performance and corrosion behaviour of plasma sprayed AlCoCrFeNi high-entropy alloy coatings , 2021, Journal of Alloys and Compounds.

[6]  T. Lampke,et al.  Microstructure and Wear Behavior of the High‐Velocity‐Oxygen‐Fuel Sprayed and Spark Plasma Sintered High‐Entropy Alloy AlCrFeCoNi , 2021, Advanced Engineering Materials.

[7]  F. Kennedy,et al.  A comparison of the dry sliding wear of single-phase f.c.c. carbon-doped Fe40.4Ni11.3Mn34.8Al7.5Cr6 and CoCrFeMnNi high entropy alloys with 316 stainless steel , 2020 .

[8]  B. S. Murty,et al.  Effect of crystal structure and grain size on corrosion properties of AlCoCrFeNi high entropy alloy , 2020 .

[9]  R. Banerjee,et al.  Discontinuous precipitation leading to nano-rod intermetallic precipitates in an Al0.2Ti0.3Co1.5CrFeNi1.5 high entropy alloy results in an excellent strength-ductility combination , 2020 .

[10]  Y. Sohn,et al.  High Entropy and Sluggish Diffusion "Core" Effects in Senary FCC Al-Co-Cr-Fe-Ni-Mn Alloys. , 2020, ACS combinatorial science.

[11]  Xue-Hui Yan,et al.  Functional properties and promising applications of high entropy alloys , 2020 .

[12]  S. Kailas,et al.  Evolution of wear debris morphology during dry sliding of Ti–6Al–4V against SS316L under ambient and vacuum conditions , 2020 .

[13]  Wei-min Liu,et al.  Vacuum tribological behaviors of CoCrFeNi high entropy alloy at elevated temperatures , 2020 .

[14]  A. Chiba,et al.  Corrosion mechanism of an equimolar AlCoCrFeNi high-entropy alloy additively manufactured by electron beam melting , 2020, npj Materials Degradation.

[15]  R. Goodall,et al.  The corrosion behaviour of CoCrFeNi-x (x = Cu, Al, Sn) high entropy alloy systems in chloride solution , 2020 .

[16]  Jianzhong Jiang,et al.  Phase Selection, Lattice Distortions, and Mechanical Properties in High‐Entropy Alloys , 2020, Advanced Engineering Materials.

[17]  A. Colella,et al.  TiC–NiCr thermal spray coatings as an alternative to WC-CoCr and Cr3C2–NiCr , 2020 .

[18]  B. S. Murty,et al.  Thermal Spray High-Entropy Alloy Coatings: A Review , 2020, Journal of Thermal Spray Technology.

[19]  Chao Zhang,et al.  Microstructure and wear behavior of FeCoNiCrMn high entropy alloy coating deposited by plasma spraying , 2020 .

[20]  B. S. Murty,et al.  Understanding the microstructural evolution of high entropy alloy coatings manufactured by atmospheric plasma spray processing , 2020 .

[21]  M. Barnett,et al.  The sliding wear behaviour of CoCrFeMnNi and AlxCoCrFeNi high entropy alloys at elevated temperatures , 2019, Wear.

[22]  B. S. Murty,et al.  Thermal stability of AlCoFeMnNi high-entropy alloy , 2019, Scripta Materialia.

[23]  D. Choudhuri,et al.  Tensile yield strength of a single bulk Al0.3CoCrFeNi high entropy alloy can be tuned from 160 MPa to 1800 MPa , 2019, Scripta Materialia.

[24]  B. S. Murty,et al.  First report on cold-sprayed AlCoCrFeNi high-entropy alloy and its isothermal oxidation , 2019, Journal of Materials Research.

[25]  P. Liaw,et al.  Effects of temperature on the tribological behavior of Al0.25CoCrFeNi high-entropy alloy , 2019, Journal of Materials Science & Technology.

[26]  Z. Lu,et al.  Evolution in microstructure and corrosion behavior of AlCoCrxFeNi high-entropy alloy coatings fabricated by laser cladding , 2019, Journal of Alloys and Compounds.

[27]  T. Shun,et al.  Effects of Cr Content on Microstructure and Mechanical Properties of AlCoCrxFeNi High-Entropy Alloy , 2018, Advances in Materials Science and Engineering.

[28]  Bin Yang,et al.  Homogenization of AlxCoCrFeNi high-entropy alloys with improved corrosion resistance , 2018 .

[29]  Christopher D. Taylor,et al.  Integrated computational materials engineering of corrosion resistant alloys , 2018, npj Materials Degradation.

[30]  Karin A. Dahmen,et al.  Corrosion of Al xCoCrFeNi high-entropy alloys: Al-content and potential scan-rate dependent pitting behavior , 2017 .

[31]  N. Frage,et al.  Heat treatment impacts the micro-structure and mechanical properties of AlCoCrFeNi high entropy alloy , 2016 .

[32]  D. Miracle,et al.  A critical review of high entropy alloys and related concepts , 2016 .

[33]  Jie Wu,et al.  Effect of porosity defects on the long-term corrosion behaviour of Fe-based amorphous alloy coated mild steel , 2016 .

[34]  N. Jones,et al.  High-entropy alloys: a critical assessment of their founding principles and future prospects , 2016 .

[35]  T. Shun,et al.  Effect of Fe content on microstructure and mechanical properties of Al0·5CoCrFexNiTi0.5 high-entropy alloys , 2016 .

[36]  Pei Wang,et al.  Effect of Ni/Cr ratio on phase, microstructure and mechanical properties of NixCoCuFeCr2−x (x = 1.0, 1.2, 1.5, 1.8 mol) high entropy alloys , 2016 .

[37]  Tingju Li,et al.  Effects of Fe Content on Microstructures and Properties of AlCoCrFexNi High-Entropy Alloys , 2015 .

[38]  A. Al-Azzawi,et al.  Mechanical Alloying and Milling , 2015 .

[39]  B. S. Murty,et al.  Plasma-Sprayed High Entropy Alloys: Microstructure and Properties of AlCoCrFeNi and MnCoCrFeNi , 2015, Metallurgical and Materials Transactions A.

[40]  B. Murty,et al.  Phase formation in mechanically alloyed AlxCoCrCuFeNi (x = 0.45, 1, 2.5, 5 mol) high entropy alloys , 2013 .

[41]  B. Bonferroni,et al.  Micromechanical properties and sliding wear behaviour of HVOF-sprayed Fe-based alloy coatings , 2012 .

[42]  P. Blau.  Elevated-temperature tribology of metallic materials , 2010 .

[43]  J. Yeh,et al.  Effect of iron content on wear behavior of AlCoCrFexMo0.5Ni high-entropy alloys , 2010 .

[44]  V. Cannillo,et al.  Wear behaviour of thermally sprayed ceramic oxide coatings , 2006 .

[45]  T. Shun,et al.  Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes , 2004 .

[46]  S. Ranganathan,et al.  Alloyed pleasures: Multimetallic cocktails , 2003 .

[47]  S. K. Pabi,et al.  INFLUENCE OF Fe AND Cr ON THE DISORDERING BEHAVIOR OF MECHANICALLY ALLOYED NiAl , 1996 .

[48]  J. Archard.  Contact and Rubbing of Flat Surfaces , 1953 .