Towards component reliability testing for marine energy converters

Abstract The dearth of generally available, failure data that can be directly applied to marine energy converters (MECs) has been commented on for some years. The advancement of the industry will be fundamentally linked to proven reliability assessments, which is difficult on an industry wide basis. This paper describes how targeted component reliability testing could enable the establishment of relevant failure rate data for the marine renewable energy industry. The necessity of dedicated component testing is briefly reviewed for the wave energy sector together with the experience from other industries. A generic procedure used in test intensive industries for service simulation testing is outlined and applied to wave tank mooring tests. By means of a rainflow analysis procedure and the Palmgren–Miner rule the most severe load cycles, largely contributing to the fatigue damage are identified and reproduced for a possible component test signal. The application of the suggested generic test approach will assist marine energy stakeholders in obtaining evidence of component reliability under simulated operational conditions much more rapidly than can be achieved with prototypes under normal service conditions. Importantly, this would also allow a more accurate estimate of field failure rates and could reveal possible failure modes/design weaknesses ahead of field deployments.

[1]  W. Meeker.  Accelerated Testing: Statistical Models, Test Plans, and Data Analyses , 1991 .

[2]  Lars Johanning,et al.  Large scale mooring test facility: A technical note , 2008 .

[3]  T. P. Ryan,et al.  System Reliability Theory: Models, Statistical Methods, and Applications, Second Edition , 2005 .

[4]  Maurice Bryson,et al.  Probability, Statistics, and Reliability for Engineers , 1997, Technometrics.

[5]  Marvin Rausand,et al.  System Reliability Theory , 2020, Wiley Series in Probability and Statistics.

[6]  Feargal Brennan,et al.  Stochastic service load simulation for engineering structures , 2001, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[7]  Marvin Rausand,et al.  A systematic approach to acclerated life testing , 1987 .

[8]  Lars Johanning,et al.  Towards design standards for WEC moorings , 2005 .

[9]  Markus Mueller,et al.  Enabling science and technology for marine renewable energy , 2008 .

[10]  Lev M. Klyatis,et al.  Accelerated quality and reliability solutions , 2006 .

[11]  Jaap Schijve,et al.  Fatigue of structures and materials , 2001 .

[12]  Peter Frigaard,et al.  Prototype Testing of the Wave Energy Converter Wave Dragon , 2006 .

[13]  Markus Mueller,et al.  The UK Energy Research Centre (UKERC) Marine Renewable Energy Technology Roadmap , 2008 .

[14]  Balbir S. Dhillon,et al.  Reliability testing: Bibliography , 1992 .

[15]  Philipp R. Thies,et al.  Is it a showstopper? Reliability assessment and criticality analysis for Wave Energy Converters , 2009 .

[16]  T R Moss,et al.  Reliability Assessment of Mechanical Systems , 1996 .

[17]  Charles A. Meuleau.  High-reliability testing and assurance for electronic components , 1965 .

[18]  E. S. Palma,et al.  Fatigue life simulation of a rear tow hook assembly of a passenger car , 2010 .

[19]  Jaap Schijve,et al.  The significance of flight-simulation fatigue tests , 1985 .

[20]  W. B. Nelson,et al.  A bibliography of accelerated test plans , 2005, IEEE Transactions on Reliability.

[21]  Lars Johanning,et al.  Measurement of the Effect of Power Absorption in the Lee of a Wave Energy Converter , 2009 .

[22]  Julian Wolfram,et al.  On Assessing the Reliability and Availability of Marine Energy Converters: The Problems of a New Technology , 2005 .

[23]  P. Heuler,et al.  Generation and use of standardised load spectra and load-time histories , 2005 .

[24]  Amin Al-Habaibeh,et al.  An innovative approach for energy generation from waves , 2010 .

[25]  R. Winston Revie,et al.  Uhlig's Corrosion Handbook , 2005 .

[26]  R. O. Snell,et al.  Fatigue Curves for Polyester Moorings - A State-of-the-Art Review , 2000 .

[27]  M. K. Ghose,et al.  Reliability testing and demonstration , 1988 .

[28]  William Q. Meeker,et al.  A Review of Accelerated Test Models , 2006, 0708.0369.

[29]  Patric Kleineidam,et al.  Fatigue Design bei Offshore‐Windenergieanlagen , 2004 .

[30]  Ross Henderson,et al.  Design, simulation, and testing of a novel hydraulic power take-off system for the Pelamis wave energy converter , 2006 .

[31]  T. B. Jones,et al.  The reliability of test results from simple test samples in predicting the fatigue performance of automotive components , 2007 .

[32]  Anton D. Raath.  A new time domain parametric dynamic system identification approach to multiaxial service load simulation testing in components , 1997 .

[33]  I. Rychlik.  A new definition of the rainflow cycle counting method , 1987 .

[34]  P. O'Connor,et al.  Practical Reliability Engineering , 1981 .

[35]  Chris Retzler,et al.  Measurements of the slow drift dynamics of a model Pelamis wave energy converter , 2006 .

[36]  Nelson Cardenas,et al.  Cyclic loading and marine environment effects on the properties of HDPE umbilical cables , 2007 .

[37]  J.C.P. Kam.  Wave action standard history (wash) for fatigue testing offshore structures , 1992 .