Computationally Efficient Finite-Element Modeling of Braided Inflatable Structural Members with Axial Reinforcing

AbstractBraided, inflatable structural members with axial reinforcing cords have the ability to accommodate loading with a low mass and small storage volume. These members are particularly attracti...

[1]  Karen H. Lyle.  Comparison of Analysis with Test for Static Loading of Two Hypersonic Inflatable Aerodynamic Decelerator Concepts , 2015 .

[2]  Karen H. Lyle.  Preliminary Structural Sensitivity Study of Hypersonic Inflatable Aerodynamic Decelerator Using Probabilistic Methods , 2014 .

[3]  Ali M. Sadegh,et al.  Mechanics of plain-woven fabrics for inflated structures , 2003 .

[4]  William G. Davids,et al.  In-Plane Load-Deflection Behavior and Buckling of Pressurized Fabric Arches , 2009 .

[5]  F. Filippou,et al.  Geometrically Nonlinear Flexibility-Based Frame Finite Element , 1998 .

[6]  Henry S. Wright,et al.  Hypersonic Inflatable Aerodynamic Decelerator (HIAD) Technology Development Overview , 2011 .

[7]  Ryan A. Stephan,et al.  Inflatable Re-Entry Vehicle Experiment (IRVE) Design Overview , 2005 .

[8]  Glen Brown,et al.  INFLATABLE STRUCTURES FOR DEPLOYABLE WINGS , 2001 .

[9]  Enrico Spacone,et al.  FIBRE BEAM–COLUMN MODEL FOR NON‐LINEAR ANALYSIS OF R/C FRAMES: PART I. FORMULATION , 1996 .

[10]  胡宁,et al.  Structural ensemble dynamics based closure model for wall-bounded turbulent flow , 2009 .

[11]  Adel Elsabbagh,et al.  Nonlinear finite element model for the analysis of axisymmetric inflatable beams , 2015 .

[12]  William G. Davids,et al.  Beam finite element for nonlinear analysis of pressurized fabric beam–columns , 2008 .

[13]  Filip C. Filippou,et al.  Evaluation of Nonlinear Frame Finite-Element Models , 1997 .

[14]  Lin Li,et al.  Finite Element Analysis of the Inflatable Re-Entry Vehicle Experiment (IRVE) , 2015 .

[15]  A. Gibson,et al.  Composite angle ply laminates and netting analysis , 2002, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[16]  Amy Soo Verge.  Rapidly Deployable Structures in Collective Protection Systems , 2006 .

[17]  William G. Davids,et al.  Bending response of externally reinforced, inflated, braided fabric arches and beams , 2012 .

[18]  Alan M. Cassell.  Design and Execution of the Hypersonic Inflatable Aerodynamic Decelerator Large-Article Wind Tunnel Experiment , 2013 .

[19]  M. Crisfield.  A consistent co-rotational formulation for non-linear, three-dimensional, beam-elements , 1990 .

[20]  C. Wielgosz,et al.  Bending and buckling of inflatable beams: Some new theoretical results , 2005 .

[21]  William G. Davids,et al.  Effect of inflation pressure on the constitutive response of coated woven fabrics used in airbeams , 2011 .

[22]  M. J. Clarke,et al.  A study of incremental-iterative strategies for non-linear analyses , 1990 .

[23]  Cliff E. Willey,et al.  Structural Analysis and Testing of the Inflatable Re-entry Vehicle Experiment (IRVE) , 2006 .

[24]  Andrew J. Goupee,et al.  Experimental Determination of Inflatable, Braided Tube Constitutive Properties , 2016 .

[25]  Anh Le van,et al.  Finite element formulation for inflatable beams , 2007 .

[26]  Andrew J. Goupee,et al.  Structural Response of Hypersonic Inflatable Aerodynamic Decelerator Braided Tube Components and Elements , 2015 .

[27]  Adriaan Beukers,et al.  Bending and optimisation of an inflated braided beam , 2005 .

[28]  Changguo Wang,et al.  Pseudo-beam method for compressive buckling characteristics analysis of space inflatable load-carrying structures , 2009 .

[29]  Quang-Tung Nguyen,et al.  Inflation and bending of an orthotropic inflatable beam , 2015 .

[30]  Alessandra Marini,et al.  Analysis of Reinforced Concrete Elements Including Shear Effects , 2006 .

[31]  Eric Jacquelin,et al.  Nonlinear finite element analysis of inflatable beams made from orthotropic woven fabric , 2010 .

[32]  Andrew J. Goupee,et al.  Bending response of reinforced, inflated, tubular braided fabric structural members , 2016 .