Single Discharge Control for Single-Inductor Multiple-Output DC–DC Buck Converters

With ever-increasing demand of feature-rich portable electronics, single-inductor multiple-output (SIMO) converters are becoming a cost-effective option to provide different supply voltages while maintaining a long battery life. A single-discharge (SDC) control scheme is proposed to simplify the SIMO design, to achieve low cross-regulation, and to support wide range of loads with reasonable power efficiency. A SDC SIMO buck converter with four outputs composed of comparators, phased-locked loop, finite state machine (FSM) controller, and an output stage, is prototyped using TSMC's 0.18-μm BCD process. In addition to the basic switching functions, the FSM controller provides a state skipping feature to allow no-load regulation. Its functionality is verified experimentally and can convert an input voltage from 2.7 to 3.7 V to 1, 1.2, 1.5, and 1.8 V outputs. The simulated peak power conversion efficiency is 86% with a combined output power ranging from 150 to 300 mW. The packaged SDC SIMO converter ICs exhibit a lower measured peak efficiency of 73%, with a cross-regulation of 0.24 mV/mA due to the parasitic bond-wire resistance. The converter prototype can support a wide range of loading conditions, from open circuit to a total output power of 1 W.

[1]  Gyu-Hyeong Cho,et al.  Load-Independent Control of Switching DC-DC Converters with Freewheeling Current Feedback , 2008, 2008 IEEE International Solid-State Circuits Conference - Digest of Technical Papers.

[2]  Gyu-Hyeong Cho,et al.  A high-stability emulated absolute current hysteretic control single-inductor 5-output switching DC-DC converter with energy sharing and balancing , 2012, 2012 IEEE International Solid-State Circuits Conference.

[3]  Gyu-Hyeong Cho,et al.  A Single-Inductor Switching DC-DC Converter with 5 Outputs and Ordered Power-Distributive Control , 2007, 2007 IEEE International Solid-State Circuits Conference. Digest of Technical Papers.

[4]  Gabriel A. Rincón-Mora,et al.  Single-Inductor–Multiple-Output Switching DC–DC Converters , 2009, IEEE Transactions on Circuits and Systems II: Express Briefs.

[5]  Gyu-Hyeong Cho,et al.  12.5 An error-based controlled single-inductor 10-output DC-DC buck converter with high efficiency at light load using adaptive pulse modulation , 2015, 2015 IEEE International Solid-State Circuits Conference - (ISSCC) Digest of Technical Papers.

[6]  Chung-Hsien Tso,et al.  A ripple control buck regulator with fixed output frequency , 2003, IEEE Power Electronics Letters.

[7]  Gabriel A. Rincón-Mora,et al.  Analysis and design of monolithic, high PSR, linear regulators for SoC applications , 2004, IEEE International SOC Conference, 2004. Proceedings..

[8]  Gabriel A. Rincón-Mora,et al.  Nested hysteretic current-mode single-inductor multiple-output (SIMO) boosting buck converter , 2013, 2013 IEEE 11th International New Circuits and Systems Conference (NEWCAS).

[9]  Gabriel A. Rincon-Mora,et al.  A low-voltage, low quiescent current, low drop-out regulator , 1998, IEEE J. Solid State Circuits.

[10]  Hyun-Chang Kim,et al.  A single-inductor, multiple-channel current-balancing LED driver for display backlight applications , 2013, 2013 IEEE Energy Conversion Congress and Exposition.

[11]  Gyu-Hyeong Cho,et al.  A PLL-based high-stability single-inductor 6-channel output DC-DC buck converter , 2010, 2010 IEEE International Solid-State Circuits Conference - (ISSCC).

[12]  Franco Maloberti,et al.  A 200-mA, 93% peak power efficiency, single-inductor, dual-output DC–DC buck converter , 2010 .

[13]  Franco Maloberti,et al.  A 4-Output Single-Inductor DC-DC Buck Converter with Self-Boosted Switch Drivers and 1.2A Total Output Current , 2008, 2008 IEEE International Solid-State Circuits Conference - Digest of Technical Papers.

[14]  Albert T. L. Lee,et al.  Scalability of Quasi-Hysteretic FSM-Based Digitally Controlled Single-Inductor Dual-String Buck LED Driver to Multiple Strings , 2014, IEEE Transactions on Power Electronics.

[15]  Franco Maloberti,et al.  A 200mA 93% Peak Efficiency Single-Inductor Dual-Output DC-DC Buck Converter , 2007, 2007 IEEE International Solid-State Circuits Conference. Digest of Technical Papers.

[16]  Cheng Huang,et al.  Cross-Regulation-Suppression control scheme for CCM Single-Inductor-Dual-Output buck converter with ordered-power-distributive control , 2011, 2011 IEEE International Symposium of Circuits and Systems (ISCAS).

[17]  Hao Min,et al.  Predictive Digital Current Control of Single-Inductor Multiple-Output Converters in CCM With Low Cross Regulation , 2012, IEEE Transactions on Power Electronics.

[18]  Weifeng Sun,et al.  A 65nm 10MHz single-inductor dual-output switching buck converter with time-multiplexing control , 2011, 2011 9th IEEE International Conference on ASIC.

[19]  Yi Zhang,et al.  A SIMO Parallel-String Driver IC for Dimmable LED Backlighting With Local Bus Voltage Optimization and Single Time-Shared Regulation Loop , 2012, IEEE Transactions on Power Electronics.

[20]  Paolo Mattavelli,et al.  Digital Control of Single-Inductor Multiple-Output Step-Down DC–DC Converters in CCM , 2008, IEEE Transactions on Industrial Electronics.

[21]  Zhiliang Hong,et al.  4.3 An 87%-peak-efficiency DVS-capable single-inductor 4-output DC-DC buck converter with ripple-based adaptive off-time control , 2014, 2014 IEEE International Solid-State Circuits Conference Digest of Technical Papers (ISSCC).

[22]  Chi-Ying Tsui,et al.  A pseudo-CCM/DCM SIMO switching converter with freewheel switching , 2002, 2002 IEEE International Solid-State Circuits Conference. Digest of Technical Papers (Cat. No.02CH37315).

[23]  Chien-Hung Tsai,et al.  A peak-current controlled single-inductor dual-output DC-DC buck converter with a time-multiplexing scheme , 2010, Proceedings of 2010 International Symposium on VLSI Design, Automation and Test.

[24]  Gyu-Hyeong Cho,et al.  Load-Independent Control of Switching DC-DC Converters With Freewheeling Current Feedback , 2008, IEEE J. Solid State Circuits.

[25]  Min-Chul Lee,et al.  A Single-Inductor Step-Up DC-DC Switching Converter with Bipolar Outputs for Active Matrix OLED Mobile Display Panels , 2007, 2007 IEEE International Solid-State Circuits Conference. Digest of Technical Papers.

[26]  Robert W. Erickson,et al.  DC-DC converter design for battery-operated systems , 1995, Proceedings of PESC '95 - Power Electronics Specialist Conference.

[27]  Hung-Chih Lin,et al.  Near-independently regulated 5-output single-inductor DC-DC buck converter delivering 1.2W/mm2 in 65nm CMOS , 2012, 2012 IEEE International Solid-State Circuits Conference.