Impact of Vegetable Oil Type on the Rheological and Tribological Behavior of Montmorillonite-Based Oleogels

We formulated and characterized oleogels based on montmorillonite clay and vegetable oils that could serve as eco-friendly semi-solid lubricants. In particular, we studied the influence of the physical-chemical properties of olive, castor, soybean, linseed, and sunflower oils on the rheological, chemical, thermal, and tribological properties of the semi-solid lubricants. We prepared the oleogels via the highly intensive mixing of vegetable oils with clay at a concentration of 30 wt.%. The oleogels exhibited shear-thinning, thixotropy, structural recovery, and gel-like behavior commonly related to that of a three-dimensional network. The results were corroborated via XRD measurements showing the presence of intercalated nanoclay structures well-dispersed in the vegetable oil. Empirical correlations between the content of saturated (SFAs), unsaturated (UFAs), mono-unsaturated (MUFAs) and poly-unsaturated (PUFAs) fatty acids and the plateau modulus of the aerogels were found. From these experimental results, we can conclude that the fatty acid profile of the vegetable oils exerts an important influence on the rheological and tribological properties of resulting clay and vegetable oil oleogels.

[1]  Sanbao Dong,et al.  Use of Betaine-Based Gel and Its Potential Application in Enhanced Oil Recovery , 2022, Gels.

[2]  Fengshan Zhou,et al.  Preparation and Hydrogelling Performances of a New Drilling Fluid Filtrate Reducer from Plant Press Slag , 2022, Gels.

[3]  N. Tandon,et al.  Development of eco-friendly nano-greases based on vegetable oil: An exploration of the character via structure , 2021, Industrial Crops and Products.

[4]  Q. Hao,et al.  Tribological Properties of the Functionalized Graphene/Montmorillonite Nanosheets as a Lubricant Additive , 2021, Tribology Letters.

[5]  Maythee Saisriyoot,et al.  Biolubricant basestocks synthesis using 5-step reaction from jatropha oil, soybean oil, and palm fatty acid distillate , 2021 .

[6]  J. E. Martín-Alfonso,et al.  Rheological and tribological approaches as a tool for the development of sustainable lubricating greases based on nano-montmorillonite and castor oil , 2021 .

[7]  Ting-jing Zhang,et al.  Fatty acid profiles of vegetable oils from four different plant sources and their effects on dough rheology and Chinese steamed bread quality , 2020, International Journal of Food Science & Technology.

[8]  S. Ilyin,et al.  Rheology and tribology of ester-based greases with microcrystalline cellulose and organomodified montmorillonite , 2020 .

[9]  J. E. Martín-Alfonso,et al.  Tunable rheological-tribological performance of “green” gel-like dispersions based on sepiolite and castor oil for lubricant applications , 2020 .

[10]  M. Reaney,et al.  Synthesis of Trimethylolpropane Esters by Base‐Catalyzed Transesterification , 2020 .

[11]  D. Dietzel,et al.  Tribological properties of a phyllosilicate based microparticle oil additive , 2019, Wear.

[12]  J. E. Martín-Alfonso,et al.  Effect of an alkali treatment on the development of cellulose pulp-based gel-like dispersions in vegetable oil for use as lubricants , 2018, Tribology International.

[13]  J. Swan,et al.  Large scale anisotropies in sheared colloidal gels , 2018 .

[14]  S. Ilyin,et al.  Structure and rheology of aqueous poly(vinyl acetate) dispersions modified with montmorillonite , 2017, Colloid Journal.

[15]  Sen Qiao,et al.  Synthesis of Biolubricant Trimethylolpropane Trioleate and Its Lubricant Base Oil Properties , 2017 .

[16]  Yanqiu Xia,et al.  Nano-montmorillonite-doped lubricating grease exhibiting excellent insulating and tribological properties , 2017 .

[17]  M. Heidari,et al.  Surfactant modified montmorillonite as a low cost adsorbent for 4-chlorophenol: Equilibrium, kinetic and thermodynamic study , 2016 .

[18]  J. E. Martín-Alfonso,et al.  Tribological, rheological, and microstructural characterization of oleogels based on EVA copolymer and vegetables oils for lubricant applications , 2015 .

[19]  C. Valencia,et al.  Linear and nonlinear viscoelasticity of oleogels based on vegetable oil and ethylene vinyl acetate copolymer/isotactic polypropylene blends , 2015 .

[20]  M. L. Kerber,et al.  Epoxy reinforcement with silicate particles: Rheological and adhesive properties – Part I: Characterization of composites with natural and organically modified montmorillonites , 2015 .

[21]  J. E. Martín-Alfonso,et al.  Influence of polymer reprocessing cycles on the microstructure and rheological behavior of polypropylene/mineral oil oleogels , 2015 .

[22]  T. McNally,et al.  Thermo-mechanical behaviour and structure of novel bitumen/nanoclay/MDI composites , 2015 .

[23]  P. Variyar,et al.  Mechanical and barrier properties of guar gum based nano-composite films. , 2015, Carbohydrate polymers.

[24]  J. E. Martín-Alfonso,et al.  Ethylene-vinyl acetate copolymer (EVA)/sunflower vegetable oil polymer gels: Influence of vinyl acetate content , 2014 .

[25]  Fabrice Ville,et al.  Comparative overview of five gear oils in mixed and boundary film lubrication , 2012 .

[26]  C. Gallegos,et al.  Atomic Force Microscopy and Thermo-Rheological Characterisation of Lubricating Greases , 2011 .

[27]  S. Mohanty,et al.  Dynamic Mechanical, Rheological, and Thermal Properties of Intercalated Polystyrene/Organomontmorillonite Nanocomposites : Effect of Clay Modification on the Mechanical and Morphological Behaviors , 2009 .

[28]  Luc Avérous,et al.  Nano-biocomposites: Biodegradable polyester/nanoclay systems , 2009 .

[29]  Faheem Uddin.  Clays, Nanoclays, and Montmorillonite Minerals , 2008 .

[30]  M. Bousmina,et al.  Biodegradable polymers and their layered silicate nanocomposites: In greening the 21st century materials world , 2005 .

[31]  T. Tadros,et al.  Steady flow and viscoelastic properties of lubricating grease containing various thickener concentrations. , 2004, Journal of colloid and interface science.

[32]  Hong-Sik Hwang,et al.  Modification of epoxidized soybean oil for lubricant formulations with improved oxidative stability and low pour point , 2001 .

[33]  Souheng Wu.  Chain structure and entanglement , 1989 .

[34]  W. R. Schowalter,et al.  Effects of hydrodynamic and colloidal forces on the coagulation of dispersions , 1979 .

[35]  M. Huggins.  Viscoelastic Properties of Polymers. , 1961 .

[36]  H. Singh,et al.  Influence of Nanoclay on the Thermophysical Properties and Lubricity Characteristics of Mineral Oil , 2019, Materials Today: Proceedings.

[37]  J. E. Martín-Alfonso,et al.  Composition-property relationship of gel-like dispersions based on organo-bentonite, recycled polypropylene and mineral oil for lubricant purposes , 2014 .

[38]  Prerna Singh Chauhan,et al.  Non-Edible Oil as a Source of Bio-Lubricant for Industrial Applications : A Review , 2013 .

[39]  O. S. Toker,et al.  Effect of oil type and fatty acid composition on dynamic and steady shear rheology of vegetable oils. , 2012, Journal of oleo science.

[40]  W. Jo,et al.  Effects of comonomers and shear on the melt intercalation of styrenics/clay nanocomposites , 2001 .

[41]  P. Rehbinder.  Coagulation and thixotropic structures , 1954 .

[42]  Test Methods for Cone Penetration of Lubricating Grease , 2022 .