How to Select the System Voltage of MV Drives—A Comparison of Semiconductor Expenses

The application of a particular medium-voltage converter in a certain application depends on numerous criteria. However, in completely new installations, the choice of the system voltage is very often uninhibited of external constraints. Then, the voltage level shall be selected to enable the most efficient power conversion at the lowest cost. This paper is dedicated to help in finding the best voltage level for three-level neutral-point-clamped voltage source converters (3L-NPC VSCs) with respect to the power semiconductor devices. Three insulated-gate-bipolar-transistor-based 3L-NPC VSCs of different voltage levels (2.3, 3.3, and 4.16 kV) are investigated and compared regarding their maximum output power, semiconductor efficiency, and semiconductor cost per MVA output power. The effects of thermal cycling, the loss distribution within the converter, and switching frequencies from 300 to 1050 Hz are considered in the evaluation.

[1]  R. Jakob,et al.  3-Level high power converter with press pack IGBT , 2007, 2007 European Conference on Power Electronics and Applications.

[2]  Holmes,et al.  Pulse width modulation for power converters , 2003 .

[3]  Felix Jenni,et al.  Steuerverfahren für selbstgeführte Stromrichter , 1995 .

[4]  Tian-Hua Liu,et al.  Optimum harmonic reduction with a wide range of modulation indexes for multilevel converters , 2002, IEEE Trans. Ind. Electron..

[5]  J. Salomaki,et al.  Cost-Effective Design of Inverter Output Filters for AC Drives , 2007, IECON 2007 - 33rd Annual Conference of the IEEE Industrial Electronics Society.

[6]  J. K. Steinke,et al.  Use of an LC filter to achieve a motor-friendly performance of the PWM voltage source inverter , 1997 .

[7]  S. Bernet,et al.  Power loss-oriented evaluation of high voltage IGBTs and multilevel converters in transformerless traction applications , 2005, IEEE Transactions on Power Electronics.

[8]  D. G. Holmes,et al.  Optimal pulse width modulation for three-level inverters , 2003, IEEE 34th Annual Conference on Power Electronics Specialist, 2003. PESC '03..

[9]  H. Tischmacher,et al.  A new 7.2kV medium voltage 3-Level-NPC inverter using 6.5kV-IGBTs , 2007, 2007 European Conference on Power Electronics and Applications.

[10]  S. Bernet,et al.  State of the art and developments of medium voltage converters - an overview , 2006 .

[11]  Bin Wu,et al.  Multilevel Voltage-Source-Converter Topologies for Industrial Medium-Voltage Drives , 2007, IEEE Transactions on Industrial Electronics.

[12]  Hirofumi Akagi,et al.  A New Neutral-Point-Clamped PWM Inverter , 1981, IEEE Transactions on Industry Applications.

[13]  Mariusz Malinowski,et al.  Comparison of 2.3-kV Medium-Voltage Multilevel Converters for Industrial Medium-Voltage Drives , 2007, IEEE Transactions on Industrial Electronics.

[14]  Steffen Bernet,et al.  The active NPC converter and its loss-balancing control , 2005, IEEE Transactions on Industrial Electronics.

[15]  R. Teichmann,et al.  Three-level topologies for low voltage power converters in drives, traction and utility applications , 2003, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003..

[16]  P.K. Steimer,et al.  Very High Power IGCT PEBB technology , 2005, 2005 IEEE 36th Power Electronics Specialists Conference.