Enhancement of hydroxide conduction by self-assembly in anion conductive comb-shaped copolymers

An anion exchange membrane (AEM) was prepared from comb-shaped copolymers bearing locally and densely functionalized side chains. In this study, we synthesized the graft copolymer of bromomethylated poly(phenylene oxide)-graft-quaternary ammonium functionalized 4-vinylbenzyl chloride (BPPO-g-QVBC), using an activator regenerated by electron transfer for atom transfer radical polymerization (ARGET ATRP) of QVBC from a BPPO macroinitiator. The BPPO-g-QVBC graft copolymers with a combination of a high graft density and appropriate graft length present advanced materials for AEMs. Flexible and transparent membranes were obtained by casting the polymers from NMP solutions, and displayed a microphase-separated morphology with nano-sized ionic clusters embedded in the hydrophobic BPPO matrix. Accordingly, the resultant membranes show considerably high conductivities, up to 0.1 S cm−1 at 80 °C, derived from the special polymer architecture. This study gives some pioneering insights and directions from the viewpoint of macromolecular design to prepare highly conductive AEMs.

[1]  Zhongwei Chen,et al.  A soluble and highly conductive ionomer for high-performance hydroxide exchange membrane fuel cells. , 2009, Angewandte Chemie.

[2]  N. Hadjichristidis,et al.  Morphologies and mechanical properties of a series of block-double-graft copolymers and terpolymers , 2002 .

[3]  G. Robertson,et al.  Comb-Shaped Poly(arylene ether sulfone)s as Proton Exchange Membranes† , 2008 .

[4]  K. Kreuer.  On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells , 2001 .

[5]  Liang Wu,et al.  Development of imidazolium-type alkaline anion exchange membranes for fuel cell application , 2012 .

[6]  Xiaocheng Lin,et al.  Synthesis and Properties of Quaternary Phosphonium-based Anion Exchange Membrane for Fuel Cells , 2012 .

[7]  Jianfu Ding,et al.  Highly Fluorinated Comb‐Shaped Copolymers as Proton Exchange Membranes (PEMs): Improving PEM Properties Through Rational Design , 2006 .

[8]  Y. Meng,et al.  Synthesis and properties of anion conductive multiblock copolymers containing tetraphenyl methane moieties for fuel cell application , 2013 .

[9]  S. Holdcroft,et al.  Considerations of macromolecular structure in the design of proton conducting polymer membranes: graft versus diblock polyelectrolytes. , 2007, Journal of the American Chemical Society.

[10]  S. Nam,et al.  Imidazolium-functionalized poly(arylene ether sulfone) block copolymer as an anion exchange membrane for alkaline fuel cell , 2013 .

[11]  R. Hayward,et al.  Enhancement of anhydrous proton transport by supramolecular nanochannels in comb polymers. , 2010, Nature chemistry.

[12]  Ned Djilali,et al.  An assessment of alkaline fuel cell technology , 2002 .

[13]  R. Slade,et al.  Prospects for Alkaline Anion‐Exchange Membranes in Low Temperature Fuel Cells , 2005 .

[14]  Nanwen Li,et al.  Enhancement of proton transport by nanochannels in comb-shaped copoly(arylene ether sulfone)s. , 2011, Angewandte Chemie.

[15]  Qiang Zhang,et al.  A novel guanidinium grafted poly(aryl ether sulfone) for high-performance hydroxide exchange membranes. , 2010, Chemical communications.

[16]  M. Guiver,et al.  Guanidinium-Functionalized Anion Exchange Polymer Electrolytes via Activated Fluorophenyl-Amine Reaction , 2011 .

[17]  Andrzej Wieckowski,et al.  Electrocatalysis of oxygen reduction and small alcohol oxidation in alkaline media. , 2007, Physical chemistry chemical physics : PCCP.

[18]  Marc A. Hillmyer,et al.  Highly Selective Polymer Electrolyte Membranes from Reactive Block Polymers , 2009 .

[19]  Huamin Zhang,et al.  A high-performance anion exchange membrane based on bi-guanidinium bridged polysilsesquioxane for alkaline fuel cell application , 2012 .

[20]  Rongrong Chen,et al.  Impacts of anion-exchange-membranes with various ionic exchange capacities on the performance of H2/O2 fuel cells , 2012 .

[21]  R. Slade,et al.  Poly(ethylene-co-tetrafluoroethylene)-Derived Radiation-Grafted Anion-Exchange Membrane with Properties Specifically Tailored for Application in Metal-Cation-Free Alkaline Polymer Electrolyte Fuel Cells , 2007 .

[22]  Cy H. Fujimoto,et al.  Transport Properties of Hydroxide and Proton Conducting Membranes , 2008 .

[23]  M. Guiver,et al.  Phenyltrimethylammonium Functionalized Polysulfone Anion Exchange Membranes , 2012 .

[24]  F. Beyer,et al.  Morphology of Model Graft Copolymers with Randomly Placed Trifunctional and Tetrafunctional Branch Points , 1998 .

[25]  Moon Jeong Park,et al.  Increased water retention in polymer electrolyte membranes at elevated temperatures assisted by capillary condensation. , 2007, Nano letters.

[26]  Y. Meng,et al.  Synthesis and properties of anion conductive ionomers containing tetraphenyl methane moieties. , 2012, ACS applied materials & interfaces.

[27]  M. Koike,et al.  Anion Conductive Aromatic Ionomers Containing Fluorenyl Groups , 2010 .

[28]  M. Liberatore,et al.  Synthesis and structure-conductivity relationship of polystyrene-block-poly(vinyl benzyl trimethylammonium) for alkaline anion exchange membrane fuel cells , 2013 .

[29]  Junhua Wang,et al.  Novel Hydroxide-Conducting Polyelectrolyte Composed of an Poly(arylene ether sulfone) Containing Pendant Quaternary Guanidinium Groups for Alkaline Fuel Cell Applications , 2010 .

[30]  Chunmei Wang,et al.  Synthesis and Characterization of Poly(vinylidene fluoride)-g-sulfonated Polystyrene Graft Copolymers for Proton Exchange Membrane , 2008 .

[31]  Yushan Yan,et al.  Engineering the van der Waals interaction in cross-linking-free hydroxide exchange membranes for low swelling and high conductivity. , 2012, ChemSusChem.

[32]  Robert B. Moore,et al.  State of understanding of nafion. , 2004, Chemical reviews.

[33]  S. Holdcroft,et al.  Solid Polymer Electrolytes Based on Ionic Graft Polymers: Effect of Graft Chain Length on Nano‐Structured, Ionic Networks , 2002 .

[34]  Jing Pan,et al.  High‐Performance Alkaline Polymer Electrolyte for Fuel Cell Applications , 2010 .

[35]  Xiaocheng Lin,et al.  Synthesis of soluble copolymers bearing ionic graft for alkaline anion exchange membrane , 2012 .

[36]  K. M. Lee,et al.  Alkaline fuel cell membranes from xylylene block ionenes , 2009 .

[37]  Manabu Tanaka,et al.  Anion conductive block poly(arylene ether)s: synthesis, properties, and application in alkaline fuel cells. , 2011, Journal of the American Chemical Society.

[38]  Qifeng Zhang,et al.  Synthesis and alkaline stability of novel cardo poly(aryl ether sulfone)s with pendent quaternary ammonium aliphatic side chains for anion exchange membranes , 2010 .

[39]  Liang Wu,et al.  Advances in proton-exchange membranes for fuel cells: an overview on proton conductive channels (PCCs). , 2013, Physical chemistry chemical physics : PCCP.