Finite element modelling of z-pinned composite T-joints

[1]  A. Mouritz,et al.  Strengthening mechanics of thin and thick composite T-joints reinforced with z-pins , 2012 .

[2]  F. Bianchi,et al.  Predicting mode-II delamination suppression in z-pinned laminates , 2012 .

[3]  P. Chang,et al.  Improving the structural properties and damage tolerance of bonded composite joints using z-pins , 2012 .

[4]  J. Kweon,et al.  The strength of composite bonded T-joints transversely reinforced by carbon pins , 2012 .

[5]  B. Castanié,et al.  Multi-level analysis of low-cost Z-pinned composite joints , 2011 .

[6]  Xiang Zhang,et al.  A cohesive zone model for predicting delamination suppression in z-pinned laminates , 2011 .

[7]  A. Mouritz,et al.  Experimental determination of the structural properties and strengthening mechanisms of z-pinned composite T-joints , 2011 .

[8]  Jiye Chen.  Simulation of multi-directional crack growth in braided composite T-piece specimens using cohesive models , 2011 .

[9]  B. Castanié,et al.  MULTI-LEVEL ANALYSIS OF LOW-COST Z-PINNED COMPOSITE JUNCTIONS. PART 1 : SINGLE Z-PIN BEHAVIOR , 2011 .

[10]  A. Mouritz,et al.  A mechanistic interpretation of the comparative in-plane mechanical properties of 3D woven, stitched and pinned composites , 2010 .

[11]  T. Diehl.  On using a penalty-based cohesive-zone finite element approach, Part II: Inelastic peeling of an epoxy-bonded aluminum strip , 2008 .

[12]  Y. Mai,et al.  Experimental study and computer simulation on degradation of z-pin reinforcement under cyclic fatigue , 2008 .

[13]  Adrian P. Mouritz,et al.  Review of z-pinned composite laminates , 2007 .

[14]  G. Allegri,et al.  On the delamination and debond suppression in structural joints by Z-fibre pinning , 2007 .

[15]  I. Partridge,et al.  3D reinforcement of stiffener-to-skin T-joints by Z-pinning and tufting , 2006 .

[16]  A. Mouritz,et al.  Properties and failure mechanisms of pinned composite lap joints in monotonic and cyclic tension , 2006 .

[17]  Brian N. Cox,et al.  Properties and failure mechanisms of z-pinned laminates in monotonic and cyclic tension , 2006 .

[18]  L. Byrd,et al.  Effectiveness of z-pins in preventing delamination of co-cured composite joints on the example of a double cantilever test , 2006 .

[19]  I. Partridge,et al.  Delamination of Z-pinned carbon fibre reinforced laminates , 2006 .

[20]  B. Cox.  Snubbing Effects in the Pullout of a Fibrous Rod from a Laminate , 2005 .

[21]  Y. Mai,et al.  Experimental study on z-pin bridging law by pullout test , 2004 .

[22]  Norman A. Fleck,et al.  Mechanisms of crack bridging by composite and metallic rods , 2004 .

[23]  Y. Mai,et al.  Numerical study on the mode I delamination toughness of z-pinned laminates , 2003 .

[24]  B. Cox,et al.  Mixed mode delamination of polymer composite laminates reinforced through the thickness by z-fibers , 2002 .