Effect of nano-Al2O3 addition and heat treatment on the microstructure and mechanical properties of Mg-(5.6Ti + 3Al) composite

[1]  M. Gupta,et al.  Enhancing tensile and compressive strengths of magnesium using nanosize (Al2O3 + Cu) hybrid reinforcements , 2012 .

[2]  M. Gupta,et al.  Effect of addition of mutually soluble and insoluble metallic elements on the microstructure, tensile and compressive properties of pure magnesium , 2011 .

[3]  B. Xiao,et al.  In situ Al3Ti and Al2O3 nanoparticles reinforced Al composites produced by friction stir processing in an Al-TiO2 system , 2011 .

[4]  M. Gupta,et al.  An investigation into the effect of ball milling of reinforcement on the enhanced mechanical response of magnesium , 2011 .

[5]  O. Hopperstad,et al.  Ageing and work-hardening behaviour of a commercial AA7108 aluminium alloy , 2009 .

[6]  Zhenru Gao,et al.  Effects of age heat treatment and thermomechanical processing on microstructure and mechanical behavior of LAZ1010 Mg alloy , 2009 .

[7]  W. Poole,et al.  Enhanced properties of Mg-based nano-composites reinforced with Al2O3 nano-particles , 2009 .

[8]  K. Das,et al.  A study of microstructure and tribological behaviour of Al–4.5% Cu/Al3Ti composites , 2009 .

[9]  Yu-tao Zhao,et al.  A new-developed magnesium matrix composite by reactive sintering , 2008 .

[10]  M. Gupta,et al.  Enhancing compressive response of AZ31B magnesium alloy using alumina nanoparticulates , 2008 .

[11]  E. Olevsky,et al.  The development of residual stresses in Ti6Al4V-Al3Ti metal-intermetallic laminate (MIL) composites , 2008 .

[12]  Xiaojun Wang,et al.  Effect of hot extrusion on the microstructure of a particulate reinforced magnesium matrix composite , 2007 .

[13]  M. Gupta,et al.  Enhancing strength and ductility of Mg/SiC composites using recrystallization heat treatment , 2006 .

[14]  Karl Ulrich Kainer,et al.  Metal matrix composites : custom-made materials for automotive and aerospace engineering , 2006 .

[15]  Zhang Xiuqing,et al.  The mechanical properties of magnesium matrix composites reinforced with (TiB2 + TiC) ceramic particulates , 2005 .

[16]  M. Gupta,et al.  Development of high performance magnesium nano-composites using nano-Al2O3 as reinforcement , 2005 .

[17]  C. Suryanarayana,et al.  Mechanical alloying and milling , 2004 .

[18]  A. Jha,et al.  In situ fabrication of Al3Ti particle reinforced aluminium alloy metal–matrix composites , 2004 .

[19]  M. Gupta,et al.  Enhancing modulus and ductility of Mg/SiC composite through judicious selection of extrusion temperature and heat treatment , 2003 .

[20]  W. Fei,et al.  Effect of heat treatment on dislocation states and work hardening behaviors of SiCw/6061Al composite , 2002 .

[21]  M. Gupta,et al.  Development of ductile magnesium composite materials using titanium as reinforcement , 2002 .

[22]  D. Miracle,et al.  Mechanical behaviour of Al3Ti intermetallic and L12 phases on its basis , 2001 .

[23]  K. N. Subramanian,et al.  Creep properties of Sn-Ag solder joints containing intermetallic particles , 2001 .

[24]  B. Mordike,et al.  Magnesium: Properties — applications — potential , 2001 .

[25]  W. Fei,et al.  Effect of annealing treatment on the microstructure of matrix in SiC whisker reinforced aluminum composite , 1999 .

[26]  B. Dodd,et al.  Experimental study on the formation of shear bands and effect of microstructure in Al-2124/SiCp composites under dynamic compression , 1994 .

[27]  I. Polmear,et al.  Magnesium alloys and applications , 1994 .

[28]  T. Clyne,et al.  Recrystallization in fibrous and particulate metal matrix composites , 1991 .

[29]  R. Doherty,et al.  Shear banding in rolled dispersion hardened AlMg2Si alloys , 1989 .

[30]  C. Friend.  The effect of matrix properties on reinforcement in short alumina fibre-aluminium metal matrix composites , 1987 .

[31]  F. J. Humphreys.  The nucleation of recrystallization at second phase particles in deformed aluminium , 1977 .

[32]  E. F. Emley.  Principles of magnesium technology , 1966 .

[33]  C. J. Smithells,et al.  Metals reference book , 1949 .