DSC characterisation of urea‐formaldehyde (UF) resin curing

Purpose – The purpose of this paper is to investigate the effects of various catalyst contents, resin solid contents, catalyst species and wood extract on urea‐formaldehyde (UF) curing by differential scanning calorimetry (DSC) technique. The finding obtained would benefit the manufacturers of UF‐bonded composite panels.Design/methodology/approach – The UF curing rate under each condition in terms of DSC peak temperature was measured by high‐pressure DSC at a heating rate of 15°C/min; the correlations of peak temperature with catalyst content, resin solid content, catalyst species and wood extract, respectively, were regressed via a model equation, which described the curing characteristics of the UF bonding system.Findings – A model equation, Tp=A · EXP(−B · CC per cent)+D, was proposed to characterise the DSC peak temperatures or the rate of UF curing with regressing coefficients greater than 0.97 (commonly greater than 0.99). The constants A and B in the model equation were found to correspond to kinet...