A true power detector for RF PA built-in calibration and testing

Different built-in self testing schemes for RF circuits have been developed resorting to peak voltage detectors. These are simple to implement but provide a conditional RF power measurement accuracy as impedance is assumed to be known. A true power detector is presented which allows obtaining more accurate measurements, namely as far as output load variations are concerned. The theoretical fundaments underlining the power detector operating principle are presented and simulation and experimental results obtained with a prototype chip are described which confirm the benefits of measuring true power, comparing to output peak voltage, when observing output load matching deviations and complex waveforms.

[1]  Giuseppe Palmisano,et al.  Fast Peak Detector with Improved Accuracy and Linearity for High-Frequency Waveform Processing , 2007, 2007 IEEE International Symposium on Circuits and Systems.

[2]  D. Lupea,et al.  Spectral Signature Analysis - BIST for RF Front-Ends , 2003 .

[3]  Bernard Jarry,et al.  Built-in Self Test for Error Vector Magnitude measurement of RF transceiver , 2009, 2009 International Test Conference.

[4]  Bruce C. Kim,et al.  A new low-cost RF built-in self-test measurement for system-on-chip transceivers , 2006, IEEE Transactions on Instrumentation and Measurement.

[5]  M. Ruberto,et al.  A reliability-aware RF power amplifier design for CMOS radio chip integration , 2008, 2008 IEEE International Reliability Physics Symposium.

[6]  Salvador Mir,et al.  A General Method to Evaluate RF BIST Techniques Based on Non-parametric Density Estimation , 2008, 2008 Design, Automation and Test in Europe.

[7]  Abhijit Chatterjee,et al.  Signature Testing of Analog and RF Circuits: Algorithms and Methodology , 2007, IEEE Transactions on Circuits and Systems I: Regular Papers.

[8]  P. Colantonio,et al.  Prediction of PA Optimum Load by Small Signal Parameters , 2006, 2006 International Workshop on Integrated Nonlinear Microwave and Millimeter-Wave Circuits.

[9]  M. Alam,et al.  The statistical distribution of percolation resistance as a probe into the mechanics of ultra-thin oxide breakdown , 2000, International Electron Devices Meeting 2000. Technical Digest. IEDM (Cat. No.00CH37138).

[10]  J.C. Cowles.  The evolution of integrated RF power measurement and control , 2004, Proceedings of the 12th IEEE Mediterranean Electrotechnical Conference (IEEE Cat. No.04CH37521).

[11]  K. Ketata,et al.  Comparative analysis of accelerated ageing effects on power RF LDMOS reliability , 2005, Microelectron. Reliab..

[12]  Luigi Carro,et al.  Low cost analogue testing of RF signal paths , 2004, Proceedings Design, Automation and Test in Europe Conference and Exhibition.

[13]  Wai Yuen Lau.  Measurement challenges for on-wafer RF-SOC test , 2002, 27th Annual IEEE/SEMI International Electronics Manufacturing Technology Symposium.

[14]  N.O. Sokal,et al.  Accurate measurement of RF power amplifier efficiency and power output without an RF power meter , 1977, IEEE Journal of Solid-State Circuits.