论文信息 - The model about the package structure of LED and the light intensity distribution

The model about the package structure of LED and the light intensity distribution

Base on the principles of the LED package structure and the LED optical model, we use Tracepro to do the simulation of LED devices. By changing the parameters of LED model, such as the package structure, the size of reflective cup, the height of chip and the angle of the reflective bowl, etc. We simulate the light intensity distribution curve of LED in different structures and find different results. That is a bigger height, a lager angle and a smaller curvature will make a better condenser effect. Compare with measurement data which shows that intensity distribution abide by some laws. Those conclusions can be used in guiding the package structure design of LEDs.

[1] S. Denbaars,et al. Increase in the extraction efficiency of GaN-based light-emitting diodes via surface roughening , 2004 .

[2] J. Joannopoulos,et al. High Extraction Efficiency of Spontaneous Emission from Slabs of Photonic Crystals , 1997 .

[3] Enhancement of Light Output Power in InGaN/GaN LEDs with Nanoroughed Hemispherical Indium Tin Oxide Transparent Ohmic Contacts , 2010 .

[4] S.C. Wang,et al. Enhancement in light output of InGaN-based microhole array light-emitting diodes , 2005, IEEE Photonics Technology Letters.

[5] Henri Benisty,et al. GaN light-emitting diodes with Archimedean lattice photonic crystals , 2006 .

[6] J. Joss,et al. Shapes of Raindrop Size Distributions , 1978 .

[7] Gustaaf Borghs,et al. Impact of texture-enhanced transmission on high-efficiency surface-textured light-emitting diodes , 2001 .

[8] R. Fang,et al. Light extraction analysis of AlGaInP based LED with surface texture , 2009, 2009 Asia Communications and Photonics conference and Exhibition (ACP).