Simultaneously Achieving Super Toughness and Reinforcement of Immiscible High-Density Polyethylene/Poly(Ethylene Terephthalate) Composite via Oriented Spherical Crystal Structure

[1]  M. Misra,et al.  Biocarbon from spent coffee ground and their sustainable biocomposites with recycled water bottle and bale wrap: A new life for waste plastics and waste food residues for industrial uses , 2021, Composites Part A: Applied Science and Manufacturing.

[2]  A. Echtermeyer,et al.  Side streams from flooring laminate production – Characterisation and recycling in biocomposite formulations for injection moulding , 2021, Composites Part A: Applied Science and Manufacturing.

[3]  Wei-hong Wang,et al.  Tailoring flexible interphases in bamboo fiber-reinforced linear low-density polyethylene composites , 2021 .

[4]  Thomas H. Epps,et al.  Toward polymer upcycling—adding value and tackling circularity , 2021, Science.

[5]  Zhaoxia Huang,et al.  Preparation of super-toughened Poly(L-lactide) composites under elongational flow: A strategy for balancing stiffness and ductility , 2021 .

[6]  Sen Qin,et al.  Amplitude–Frequency Characteristics During the Volume-Pulsatile Packing Process , 2021 .

[7]  J. Qu,et al.  Simultaneously achieving self-toughening and self-reinforcing of polyethylene on an industrial scale using volume-pulsation injection molding , 2020 .

[8]  L. Cardon,et al.  Relationship between the Processing, Structure, and Properties of Microfibrillar Composites , 2020, Advanced materials.

[9]  N. Yan,et al.  The structure changes of polypropylene precursor film with different die draw ratio during annealing , 2020 .

[10]  E. Behzadfar,et al.  Morphological, interfacial and rheological properties in multilayer polymers: A review , 2020 .

[11]  T. Koch,et al.  The effect of PP contamination in recycled high-density polyethylene (rPE-HD) from post-consumer bottle waste and their compatibilization with olefin block copolymer (OBC). , 2020, Waste management.

[12]  Joshua C. Worch,et al.  100th Anniversary of Macromolecular Science Viewpoint: Toward Catalytic Chemical Recycling of Waste (and Future) Plastics. , 2020, ACS macro letters.

[13]  J. Qu,et al.  Simultaneously toughening and reinforcing high-density polyethylene via an industrial volume-pulsatile injection molding machine and Poly(ethylene terephthalate) , 2020 .

[14]  Chul B. Park,et al.  Strong and super thermally insulating in-situ nanofibrillar PLA/PET composite foam fabricated by high-pressure microcellular injection molding , 2020, Chemical Engineering Journal.

[15]  M. Kontopoulou,et al.  Improvements in the crystallinity and mechanical properties of PLA by nucleation and annealing , 2019, Polymer Degradation and Stability.

[16]  Hongfei Li,et al.  Crystal structure and unique lamellar thickening for poly(l-lactide) induced by high pressure , 2019, Polymer.

[17]  J. Qu,et al.  Super-toughened poly(lactic acid)/thermoplastic poly(ether)urethane nanofiber composites with in-situ formation of aligned nanofibers prepared by an innovative eccentric rotor extruder , 2019, Composites Science and Technology.

[18]  Yixin Jiang,et al.  Insight into Understanding the Influence of Blending Ratio on the Structure and Properties of High-Density Polyethylene/Polystyrene Microfibril Composites Prepared by Vibration Injection Molding , 2018, Industrial & Engineering Chemistry Research.

[19]  Christopher J. Ellison,et al.  Compatibilization of Isotactic Polypropylene (iPP) and High-Density Polyethylene (HDPE) with iPP–PE Multiblock Copolymers , 2018, Macromolecules.

[20]  Yixin Jiang,et al.  Composite Contains Large Content of In Situ Microfibril, Prepared Directly by Injection Molding: Morphology and Property , 2018, Macromolecular Materials and Engineering.

[21]  Jie Zhang,et al.  Effect of high‐temperature annealing on the microstructure and mechanical properties of polypropylene with shish kebab or spherulite structure , 2018 .

[22]  Piotr Wolszczak,et al.  Enhancement of Mechanical Properties of FDM-PLA Parts via Thermal Annealing , 2018, Macromolecular Materials and Engineering.

[23]  I. Kelnar,et al.  Complex effect of graphite nanoplatelets on performance of HDPE/PA66 microfibrillar composites , 2018, Composites Part B: Engineering.

[24]  Jie Zhang,et al.  Improving the mechanical and thermal properties of shish-kebab via partial melting and re-crystallization , 2018 .

[25]  L. Deng,et al.  Supertoughened Polylactide Binary Blend with High Heat Deflection Temperature Achieved by Thermal Annealing above the Glass Transition Temperature , 2018 .

[26]  Xu-Ming Xie,et al.  High-strength and super-tough PA6/PS/PP/SEBS quaternary blends compatibilized by using a highly effective multi-phase compatibilizer: Toward efficient recycling of waste plastics , 2017 .

[27]  F. Ronkay,et al.  Effects of Phase Inversion on Molding Shrinkage, Mechanical, and Burning Properties of Injection-molded PET/HDPE and PS/HDPE Polymer Blends , 2017 .

[28]  I. Kelnar,et al.  J-integral evaluation of nanoclay-modified HDPE/PA6 microfibrillar composites , 2017 .

[29]  Anne M. LaPointe,et al.  Combining polyethylene and polypropylene: Enhanced performance with PE/iPP multiblock polymers , 2017, Science.

[30]  Chul B. Park,et al.  Fiber-spun polypropylene/polyethylene terephthalate microfibrillar composites with enhanced tensile and rheological properties and foaming ability , 2017 .

[31]  Jie Zhang,et al.  Quantification of the Effect of Shish-Kebab Structure on the Mechanical Properties of Polypropylene Samples by Controlling Shear Layer Thickness , 2016 .

[32]  Zhiping Zhou,et al.  Polymer crystal nucleation with confinement-enhanced orientation dominating the formation of nanohybrid shish-kebabs with multiple shish , 2016 .

[33]  M. Quaresimin,et al.  Toughening mechanisms in polymer nanocomposites: From experiments to modelling , 2016 .

[34]  Jinghong Ma,et al.  Transition from shish-kebab to fibrillar crystals during ultra-high hot stretching of ultra-high molecular weight polyethylene fibers: In situ small and wide angle X-ray scattering studies , 2015 .

[35]  Chul B. Park,et al.  Tuning viscoelastic and crystallization properties of polypropylene containing in-situ generated high aspect ratio polyethylene terephthalate fibrils , 2015 .

[36]  Q. Fu,et al.  Simultaneous the thermodynamics favorable compatibility and morphology to achieve excellent comprehensive mechanics in PLA/OBC blend , 2014 .

[37]  D. Jia,et al.  Significant improvement in performance of recycled polyethylene/wood flour composites by synergistic compatibilization at multi-scale interfaces , 2014 .

[38]  Jinghong Ma,et al.  Lamellae break induced formation of shish-kebab during hot stretching of ultra-high molecular weight polyethylene precursor fibers investigated by in situ small angle X-ray scattering , 2014 .

[39]  S. Fakirov.  Nano-/microfibrillar polymer–polymer and single polymer composites: The converting instead of adding concept , 2013 .

[40]  J. Rieger,et al.  Effect of processing parameters on the morphology development during extrusion of polyethylene tape : an in-line small-angle X-ray scattering (SAXS) study , 2013 .

[41]  Jiachun Feng,et al.  Synergistic improvement of toughness of isotactic polypropylene: The introduction of high density polyethylene and annealing treatment , 2013 .

[42]  A. Sivan,et al.  New perspectives in plastic biodegradation. , 2011, Current opinion in biotechnology.

[43]  K. Oksman,et al.  Silane-crosslinking of recycled low-density polyethylene/wood composites , 2010 .

[44]  Quanguo Zhang,et al.  Morphology and properties of microfibrillar composites based on recycled poly (ethylene terephthalate) and high density polyethylene , 2009 .

[45]  Xianbao Wang,et al.  Carbon nanotubes periodically decorated by high-density polyethylene crystalline using solution crystallization , 2009 .

[46]  Dongming Qi,et al.  Phenolic rigid organic filler/isotactic polypropylene composites. III. Impact resistance property , 2009 .

[47]  B. Li,et al.  Influence of molecular weight on impact fracture behavior of injection molded high density polyethylene: Scanning electron micrograph observations , 2008 .

[48]  Zhong‐Ming Li,et al.  Application of In Situ Microfibrillization to Recycling Ultraviolet‐Aged Poly(Ethylene Terephthalate) (PET) and High Density Polyethylene (HDPE) , 2007 .

[49]  G. Zhong,et al.  Recyclability of In Situ Microfibrillar Poly(ethylene terephthalate)/High‐Density Polyethylene Blends , 2007 .

[50]  B. Hsiao,et al.  FLOW-INDUCED SHISH KEBAB PRECURSOR STRUCTURES IN ENTANGLED POLYMER MELTS , 2005 .

[51]  A. K. Wood,et al.  Scanning electron micrographs of high density polyethylene fracture surfaces , 2004 .

[52]  Q. Fu,et al.  Dependence of impact strength on the fracture propagation direction in dynamic packing injection molded PP/EPDM blends , 2003 .

[53]  A. Argon,et al.  Toughness mechanism in semi-crystalline polymer blends: I. High-density polyethylene toughened with rubbers , 1999 .

[54]  D. Bassett,et al.  An improved permanganic etchant for polyolefines , 1982 .

[55]  R. Doherty,et al.  The structure of deformed aluminium and its recrystallization—investigations with transmission Kossel diffraction , 1977 .