3D Printing of Customized Li‐Ion Batteries with Thick Electrodes

The growing demand for rechargeable lithium-ion batteries (LIBs) with higher capacity in customized geometries underscores the need for new battery materials, architectures, and assembly strategies. Here, the design, fabrication, and electrochemical performance of fully 3D printed LIBs composed of thick semisolid electrodes that exhibit high areal capacity are reported. Specifically, semisolid cathode and anode inks, as well as UV curable packaging and separator inks for direct writing of LIBs in arbitrary geometries are created. These fully 3D printed and packaged LIBs, which are encased between two glassy carbon current collectors, deliver an areal capacity of 4.45 mAh cm-2 at a current density of 0.14 mA cm-2 , which is equivalent to 17.3 Ah L-1 . The ability to produce high-performance LIBs in customized form factors opens new avenues for integrating batteries directly within 3D printed objects.

[1]  Eric R Weeks,et al.  Structure and dynamics of biphasic colloidal mixtures. , 2008, Physical review. E, Statistical, nonlinear, and soft matter physics.

[2]  Hyun-Wook Lee,et al.  A pomegranate-inspired nanoscale design for large-volume-change lithium battery anodes. , 2014, Nature nanotechnology.

[3]  Yi Cui,et al.  Lithium‐Ion Textile Batteries with Large Areal Mass Loading , 2011 .

[4]  Jingxian Zhang,et al.  Poly(Vinyl Pyrrolidone), a Dispersant for Non‐Aqueous Processing of Silicon Carbide , 2005 .

[5]  Keun-Ho Choi,et al.  Mechanically compliant and lithium dendrite growth-suppressing composite polymer electrolytes for flexible lithium-ion batteries , 2013 .

[6]  M. Armand,et al.  Issues and challenges facing rechargeable lithium batteries , 2001, Nature.

[7]  J. Lewis,et al.  Cationic comb polymer superdispersants for colloidal silica suspensions. , 2009, Langmuir : the ACS journal of surfaces and colloids.

[8]  Chunsong Zhao,et al.  Synthesis and electrochemical performance of LiCoPO4 micron-rods by dispersant-aided hydrothermal method for lithium ion batteries , 2009 .

[9]  Daeyeon Lee,et al.  Avoiding cracks in nanoparticle films. , 2012, Nano letters.

[10]  Daniel A. Steingart,et al.  A High Areal Capacity Flexible Lithium‐Ion Battery with a Strain‐Compliant Design , 2015 .

[11]  M. Youssry,et al.  Non-aqueous carbon black suspensions for lithium-based redox flow batteries: rheology and simultaneous rheo-electrical behavior. , 2013, Physical chemistry chemical physics : PCCP.

[12]  Yet-Ming Chiang,et al.  Electronically conductive phospho-olivines as lithium storage electrodes , 2002, Nature materials.

[13]  D. Guyomard,et al.  Design of Aqueous Processed Thick LiFePO4 Composite Electrodes for High-Energy Lithium Battery , 2009 .

[14]  Y. Ein‐Eli,et al.  Conveying Advanced Li‐ion Battery Materials into Practice The Impact of Electrode Slurry Preparation Skills , 2016 .

[15]  M. R. Palacín,et al.  Why do batteries fail? , 2016, Science.

[16]  M. Cerbelaud,et al.  Manufacturing of industry-relevant silicon negative composite electrodes for lithium ion-cells , 2014 .

[17]  D. He,et al.  High areal capacity Li ion battery anode based on thick mesoporous Co3O4 nanosheet networks , 2014 .

[18]  Horst Hahn,et al.  Thick Electrodes for High Energy Lithium Ion Batteries , 2015 .

[19]  Junjie Gu,et al.  The effects of electrode thickness on the electrochemical and thermal characteristics of lithium ion battery , 2015 .

[20]  M. Verbrugge,et al.  Formulation and characterization of ultra-thick electrodes for high energy lithium-ion batteries employing tailored metal foams , 2011 .

[21]  Linsen Li,et al.  High-performance battery electrodes via magnetic templating , 2016, Nature Energy.

[22]  Vladimir V. Tsukruk,et al.  Designing two-dimensional materials that spring rapidly into three-dimensional shapes , 2015, Science.

[23]  Huisheng Peng,et al.  A Gum‐Like Lithium‐Ion Battery Based on a Novel Arched Structure , 2015, Advanced materials.

[24]  Gareth H. McKinley,et al.  Biphasic Electrode Suspensions for Li‐Ion Semi‐solid Flow Cells with High Energy Density, Fast Charge Transport, and Low‐Dissipation Flow , 2015 .

[25]  Yulong Ding,et al.  Investigation into the antibacterial behaviour of suspensions of ZnO nanoparticles (ZnO nanofluids) , 2007 .

[26]  Ying Xie,et al.  Structural and thermodynamic stability of Li4Ti5O12 anode material for lithium-ion battery , 2013 .

[27]  F. Jiang,et al.  Elucidating the Performance Limitations of Lithium-ion Batteries due to Species and Charge Transport through Five Characteristic Parameters , 2016, Scientific Reports.

[28]  Partha P Mukherjee,et al.  Columnar order in jammed LiFePO4 cathodes: ion transport catastrophe and its mitigation. , 2012, Physical chemistry chemical physics : PCCP.

[29]  R. Wycisk,et al.  Electrospun titania-based fibers for high areal capacity Li-ion battery anodes , 2015 .

[30]  W. Shyy,et al.  Numerical Simulation of Intercalation-Induced Stress in Li-Ion Battery Electrode Particles , 2007 .

[31]  B. Nykvist,et al.  Rapidly falling costs of battery packs for electric vehicles , 2015 .

[32]  Paul V Braun,et al.  High-power lithium ion microbatteries from interdigitated three-dimensional bicontinuous nanoporous electrodes , 2013, Nature Communications.

[33]  Ming Jia,et al.  Pre-dispersed carbon black as conductive agent for LiFePO4 cathodes , 2014 .

[34]  Qian Cheng,et al.  Folding paper-based lithium-ion batteries for higher areal energy densities. , 2013, Nano letters.

[35]  Jianming Zheng,et al.  High Energy Density Lithium–Sulfur Batteries: Challenges of Thick Sulfur Cathodes , 2015 .

[36]  Partha P. Mukherjee,et al.  Analysis of the Implications of Rapid Charging on Lithium-Ion Battery Performance , 2015 .

[37]  Tian Li,et al.  Graphene Oxide‐Based Electrode Inks for 3D‐Printed Lithium‐Ion Batteries , 2016, Advanced materials.

[38]  J. Lewis,et al.  3D Printing of Interdigitated Li‐Ion Microbattery Architectures , 2013, Advanced materials.

[39]  Wei Liu,et al.  3D Porous Sponge‐Inspired Electrode for Stretchable Lithium‐Ion Batteries , 2016, Advanced materials.

[40]  Jingjing Xu,et al.  A new configured lithiated silicon–sulfur battery built on 3D graphene with superior electrochemical performances , 2016 .

[41]  K. Nishikawa,et al.  Diffusivity Measurement of LiPF6, LiTFSI, LiBF4 in PC , 2008, ECS Transactions.

[42]  Thomas F. Marinis,et al.  Ultrahigh‐Energy‐Density Microbatteries Enabled by New Electrode Architecture and Micropackaging Design , 2010, Advanced materials.

[43]  Yonggang Yao,et al.  Ultra‐Thick, Low‐Tortuosity, and Mesoporous Wood Carbon Anode for High‐Performance Sodium‐Ion Batteries , 2016 .

[44]  Sang Chul Lee,et al.  Effects of Particle Size, Electronic Connectivity, and Incoherent Nanoscale Domains on the Sequence of Lithiation in LiFePO4 Porous Electrodes , 2015, Advanced materials.

[45]  Xiangyun Song,et al.  A comprehensive understanding of electrode thickness effects on the electrochemical performances of Li-ion battery cathodes , 2012 .

[46]  George W. Crabtree,et al.  The energy-storage frontier: Lithium-ion batteries and beyond , 2015 .

[47]  SHIGEHIKO YAMADA,et al.  Some Physical Properties of Glassy Carbon , 1962, Nature.

[48]  Paul V. Braun,et al.  Three-dimensional bicontinuous ultrafast-charge and -discharge bulk battery electrodes. , 2011, Nature nanotechnology.

[49]  B. Scrosati,et al.  High-Resolution In-Situ Structural Measurements of the Li4/3Ti5/3O4 “Zero-Strain” Insertion Material , 2002 .

[50]  S. Joo,et al.  Ultra-thick Li-ion battery electrodes using different cell size of metal foam current collectors , 2015 .

[51]  Xiaojian Wang,et al.  Mechanisms of PVP in the preparation of silver nanoparticles , 2005 .

[52]  Y. Gogotsi,et al.  True Performance Metrics in Electrochemical Energy Storage , 2011, Science.