Preparation and characterization of activated carbons from oil-palm stones for gas-phase adsorption

Abstract Preparation and characterization of activated carbons from oil-palm stones by carbon dioxide activation were studied in this paper. These oil-palm stones are agricultural by-products from palm-oil mills in several tropical countries. Ultimate and proximate analyses, pycnometry, mercury porosimetry, surface area and porosimetry as well as transmission electron microscopy were carried out for evaluating the textural properties of the activated carbons. It was found that the activation temperature and hold time had significant influences on the surface area and pore size distribution of the activated carbon. The optimum conditions for preparing these activated carbons from chars pyrolyzed at 600°C to derive the highest specific surface areas were found to be an activation temperature of 900°C and a hold time of 30 min. For chemical characterization, an X-ray diffractometer and a Fourier transform infrared (FTIR) spectroscope were used to identify the inorganic components and surface organic functional groups of the activated carbons, respectively. The activation temperature and hold time had significant effects on the surface functional groups. For the determination of the adsorptive capacity of the activated carbons, adsorption of sulphur dioxide was carried out using thermogravimetric analyses. Experimental results showed that sulphur dioxide could be adsorbed effectively by the oil-palm stone-activated carbons. The adsorptive capacity of these activated carbons was comparable with those of some commercial activated carbons.

[1]  K. Gergova,et al.  Effects of activation method on the pore structure of activated carbons from apricot stones , 1996 .

[2]  Michael Thorpe,et al.  Access in nanoporous materials , 2002 .

[3]  E. Barrett,et al.  (CONTRIBUTION FROM THE MULTIPLE FELLOWSHIP OF BAUGH AND SONS COMPANY, MELLOX INSTITUTE) The Determination of Pore Volume and Area Distributions in Porous Substances. I. Computations from Nitrogen Isotherms , 1951 .

[4]  Kenneth E. Noll,et al.  Adsorption technology for air and water pollution control , 1991 .

[5]  A. Marcilla,et al.  CO2 activation of olive stones carbonized under different experimental conditions , 1997 .

[6]  J. Perrich.  Activated Carbon Adsorption For Wastewater Treatment , 1981 .

[7]  E. Teller,et al.  ADSORPTION OF GASES IN MULTIMOLECULAR LAYERS , 1938 .

[8]  W. E. White,et al.  Changes in Surface Area, Pore Structure and Density during Formation of High-temperature Chars from Representative U.S. Coals , 1990 .

[9]  R. N. Viswanath,et al.  Study of TiO2 nanocrystallites in TiO2SiO2 composites , 1998 .

[10]  V. Gómez-Serrano,et al.  Heat treatment of rockrose char in air. Effect on surface chemistry and porous texture , 1996 .

[11]  A. Lua,et al.  Characterization of chars pyrolyzed from oil palm stones for the preparation of activated carbons , 1998 .

[12]  Joo-Hwa Tay,et al.  Complete reclamation of oil palm wastes , 1991 .

[13]  J. Laine,et al.  Effect of the preparation method on the pore size distribution of activated carbon from coconut shell , 1992 .

[14]  V. Gómez-Serrano,et al.  Characterization study of char and activated carbon prepared from raw and extracted rockrose , 1993 .

[15]  J. J. Rodríguez,et al.  Preparation and characterization of activated carbons from eucalyptus kraft lignin , 1993 .

[16]  F. Rodríguez-Reinoso,et al.  Effect of steam activation on the porosity and chemical nature of activated carbons from Eucalyptus globulus and peach stones , 1997 .

[17]  H. Boehm.,et al.  Some aspects of the surface chemistry of carbon blacks and other carbons , 1994 .