Electrochemical Behavior of Layered Solid Solution Li2MnO3−LiMO2 (M = Ni, Mn, Co) Li-Ion Cathodes with and without Alumina Coatings

[1]  Arunachala Mada Kannan,et al.  Surface/Chemically Modified LiMn2 O 4 Cathodes for Lithium-Ion Batteries , 2002 .

[2]  Jun Liu,et al.  Carbon-coated high capacity layered Li[Li0.2Mn0.54Ni0.13Co0.13]O2 cathodes , 2010 .

[3]  A. Manthiram,et al.  Effect of surface modifications on the layered solid solution cathodes (1 − z) Li[Li1/3Mn2/3]O2 − (z) Li[Mn0.5 − yNi0.5 − yCo2y]O2 , 2009 .

[4]  Arumugam Manthiram,et al.  High Capacity, Surface-Modified Layered Li [ Li ( 1 − x ) ∕ 3Mn ( 2 − x ) ∕ 3Nix ∕ 3Cox ∕ 3 ] O2 Cathodes with Low Irreversible Capacity Loss , 2006 .

[5]  Ilias Belharouak,et al.  Advanced cathode materials for high-power applications , 2005 .

[6]  Robert A. Huggins,et al.  Thermodynamic and Mass Transport Properties of “ LiAl ” , 1979 .

[7]  Arumugam Manthiram,et al.  Surface Modification of High Capacity Layered Li [ Li0.2Mn0.54Ni0.13Co0.13 ] O2 Cathodes by AlPO4 , 2008 .

[8]  Christopher S. Johnson,et al.  Anomalous capacity and cycling stability of xLi2MnO3 · (1 − x)LiMO2 electrodes (M = Mn, Ni, Co) in lithium batteries at 50 °C , 2007 .

[9]  A. Manthiram,et al.  Improved Electrochemical Performance of the 5 V Spinel Cathode LiMn1.5Ni0.42Zn0.08O4 by Surface Modification , 2009 .

[10]  R. Holze,et al.  Cathode materials modified by surface coating for lithium ion batteries , 2006 .

[11]  Sang Hyo Lee,et al.  Effect of Co3(PO4)2 coating on Li[Co0.1Ni0.15Li0.2Mn0.55]O2 cathode material for lithium rechargeable batteries , 2008 .

[12]  Yang-Kook Sun,et al.  Electrochemical performance of nano-sized ZnO-coated LiNi0.5Mn1.5O4 spinel as 5 V materials at elevated temperatures , 2002 .

[13]  B. Lucht,et al.  Electrochemical Characteristics of MCMB and LiNi x Co1 − x O2 Electrodes in Electrolytes with Stabilizing Additives , 2008 .

[14]  Michael Holzapfel,et al.  Demonstrating oxygen loss and associated structural reorganization in the lithium battery cathode Li[Ni0.2Li0.2Mn0.6]O2. , 2006, Journal of the American Chemical Society.

[15]  J. Tirado,et al.  X-ray diffraction and electrochemical impedance spectroscopy study of zinc coated LiNi0.5Mn1.5O4 electrodes , 2004 .

[16]  Michael M. Thackeray,et al.  Enhancing the rate capability of high capacity xLi2MnO3 · (1 -x)LiMO2 (M = Mn, Ni, Co) electrodes by Li-Ni-PO4 treatment , 2009 .

[17]  D. D. MacNeil,et al.  Layered Cathode Materials Li [ Ni x Li ( 1 / 3 − 2x / 3 ) Mn ( 2 / 3 − x / 3 ) ] O 2 for Lithium-Ion Batteries , 2001 .

[18]  Hiroshi Nakamura,et al.  Surface Modification of Li-Excess Mn-based Cathode Materials , 2010 .

[19]  John T. Vaughey,et al.  Li{sub2}MnO{sub3}-stabilized LiMO{sub2} (M=Mn, Ni, Co) electrodes for high energy lithium-ion batteries , 2007 .

[20]  P. Griffiths.  Fourier Transform Infrared Spectrometry , 2007 .

[21]  Changyin Jiang,et al.  Surface treatment of LiNi0.8Co0.2O2 cathode material for lithium secondary batteries , 2001 .

[22]  A. Manthiram,et al.  Understanding the Improvement in the Electrochemical Properties of Surface Modified 5 V Limn1.42Ni0.42Co0.16O4 Spinel Cathodes in Lithium-ion Cells , 2009 .

[23]  E. Deiss,et al.  Spurious potential dependence of diffusion coefficients in Li+ insertion electrodes measured with PITT , 2002 .