Mapping the resistivity structure of Walker Ridge 313 in the Gulf of Mexico using the marine CSEM method

Abstract A marine controlled source electromagnetic (CSEM) campaign was carried out in the Gulf of Mexico to further develop marine electromagnetic techniques in order to aid the detection and mapping of gas hydrate deposits. Marine CSEM methods are used to obtain an electrical resistivity structure of the subsurface which can indicate the type of substance filling the pore space, such as gas hydrates which are more resistive. Results from the Walker Ridge 313 study (WR 313) are presented in this paper and compared with the Gulf of Mexico Gas Hydrate Joint Industry Project II (JIP2) logging while drilling (LWD) results and available seismic data. The hydrate, known to exist within sheeted sand deposits, is mapped as a resistive region in the two dimensional (2D) CSEM inversion models. This is consistent with the JIP2 LWD resistivity results. CSEM inversions that use seismic horizons provide more realistic results compared to the unconstrained inversions by providing sharp boundaries and architectural control on the location of the resistive and conductive regions in the CSEM model. The seismic horizons include: 1) the base of the gas hydrate stability zone (BGHSZ), 2) the top of salt, and 3) the top and bottom of a fine grained marine mud interval with near vertical hydrate filled fractures, to constrain the CSEM inversion model. The top of salt provides improved location for brines, water saturated salt, and resistive salt. Inversions of the CSEM data map the occurrence of a ‘halo’ of conductive brines above salt. The use of the BGHSZ as a constraint on the inversion helps distinguish between free gas and gas hydrate as well as gas hydrate and water saturated sediments.

[1]  Warren T. Wood,et al.  Site Selection for DOE/JIP Gas Hydrate Drilling in the Northern Gulf of Mexico , 2008 .

[2]  Carolyn A. Koh,et al.  Clathrate hydrates of natural gases , 1990 .

[3]  A. Malinverno,et al.  Gas hydrate reservoirs and gas migration mechanisms in the Terrebonne Basin, Gulf of Mexico , 2017 .

[4]  S. Thiel,et al.  Mapping fractures using 1D anisotropic modelling of magnetotelluric data: a case study from the Otway Basin, Victoria, Australia , 2015 .

[5]  Anne M. Trehu,et al.  A marine electromagnetic survey to detect gas hydrate at Hydrate Ridge, Oregon , 2011 .

[6]  Steve Constable,et al.  Navigating marine electromagnetic transmitters using dipole field geometry , 2014 .

[7]  Michael E. Glinsky,et al.  Marine CSEM of the Scarborough gas field, Part 1: Experimental design and data uncertainty , 2012 .

[8]  Kerry Key,et al.  2D marine controlled-source electromagnetic modeling: Part 1 — An adaptive finite-element algorithm , 2007 .

[9]  A. Malinverno,et al.  Short migration of methane into a gas hydrate‐bearing sand layer at Walker Ridge, Gulf of Mexico , 2013 .

[10]  A. Cook,et al.  The character and amplitude of 'discontinuous' bottom-simulating reflections in marine seismic data , 2017 .

[11]  W. Shedd,et al.  Architecture of gas-hydrate-bearing sands from Walker Ridge 313, Green Canyon 955, and Alaminos Canyon 21: Northern deepwater Gulf of Mexico , 2012 .

[12]  S. Constable,et al.  Electromagnetic detection of plate hydration due to bending faults at the Middle America Trench , 2012 .

[13]  Jeffrey S. Ovall,et al.  A parallel goal-oriented adaptive finite element method for 2.5-D electromagnetic modelling , 2011 .

[14]  Daniel R. McConnell,et al.  Images of the Base of Gas Hydrate Stability, Northwest Walker Ridge, Gulf of Mexico , 2002 .

[15]  W. Shedd,et al.  Gas hydrate resource potential in the Terrebonne Basin, Northern Gulf of Mexico , 2012 .

[16]  D. Marquardt.  An Algorithm for Least-Squares Estimation of Nonlinear Parameters , 1963 .

[17]  Steven Constable,et al.  Vulcan: A deep‐towed CSEM receiver , 2016 .

[18]  L. MacGregor,et al.  2.5D inversion of CSEM data in a vertically anisotropic earth , 2010 .

[19]  M. Lee,et al.  Gas hydrate saturations estimated from fractured reservoir at Site NGHP-01-10, Krishna-Godavari Basin, India , 2009 .

[20]  R. N. Edwards.  On the resource evaluation of marine gas hydrate deposits using sea‐floor transient electric dipole‐dipole methods , 1997 .

[21]  Kerry Key,et al.  First results from a marine controlled‐source electromagnetic survey to detect gas hydrates offshore Oregon , 2006 .

[22]  K. Rose,et al.  Scientific Objectives of the Gulf of Mexico Gas Hydrate JIP Leg II Drilling , 2008 .

[23]  Resistivity imaging of shallow salt with magnetotellurics as an aid to prestack depth migration , 2000 .

[24]  Kerry Key,et al.  Broad-band waveforms and robust processing for marine CSEM surveys , 2011 .

[25]  A. Malinverno,et al.  Natural gas hydrates occupying fractures: A focus on non-vent sites on the Indian continental margin and the northern Gulf of Mexico , 2014 .

[26]  Kerry Key,et al.  And the geophysicist replied: “Which model do you want?” , 2015 .

[27]  David Andreis,et al.  Sensitivity and inversion of marine electromagnetic data in a vertically anisotropic stratified earth , 2011 .

[28]  Thomas H. Shipley,et al.  Seismic Evidence for Widespread Possible Gas Hydrate Horizons on Continental Slopes and Rises , 1979 .

[29]  Alexei V. Milkov,et al.  Thickness of the gas hydrate stability zone, Gulf of Mexico continental slope , 2000 .

[30]  Alexei V. Milkov,et al.  Estimate of gas hydrate resource, northwestern Gulf of Mexico continental slope , 2001 .

[31]  S. Constable.  Review paper: Instrumentation for marine magnetotelluric and controlled source electromagnetic sounding , 2013 .

[32]  Ray Boswell,et al.  Resource and hazard implications of gas hydrates in the Northern Gulf of Mexico: Results of the 2009 Joint Industry Project Leg II Drilling Expedition , 2012 .

[33]  C. Farquharson.  Approximate sensitivities for the multi-dimensional electromagnetic inverse problem , 1995 .

[34]  S. Bünz,et al.  Variations in pockmark composition at the Vestnesa Ridge: Insights from marine controlled source electromagnetic and seismic data , 2017 .

[35]  R. N. Edwards,et al.  Marine gas hydrate electromagnetic signatures in Cascadia and their correlation with seismic blank zones , 2005 .

[36]  B. Anderson,et al.  Electrical anisotropy due to gas hydrate-filled fractures , 2010 .

[37]  W. Kou,et al.  Direct seismic indicators of gas hydrates in the Walker Ridge and Green Canyon areas, deepwater Gulf of Mexico , 2007 .

[38]  B. Anderson,et al.  Electrical anisotropy of gas hydrate-bearing sand reservoirs in the Gulf of Mexico , 2012 .

[39]  W. Shedd,et al.  Subsurface gas hydrates in the northern Gulf of Mexico , 2012 .

[40]  Warren T. Wood,et al.  Methane Hydrate and Free Gas on the Blake Ridge from Vertical Seismic Profiling , 1996, Science.

[41]  Katrin Schwalenberg,et al.  Sensitivity studies applied to a two-dimensional resistivity model from the Central Andes , 2002 .

[42]  G. E. Archie.  The electrical resistivity log as an aid in determining some reservoir characteristics , 1942 .

[43]  S. Constable.  Ten years of marine CSEM for hydrocarbon exploration , 2010 .

[44]  Kerry Key,et al.  MARE2DEM: a 2-D inversion code for controlled-source electromagnetic and magnetotelluric data , 2016 .

[45]  W. Shedd,et al.  Occurrence and nature of “bottom simulating reflectors” in the northern Gulf of Mexico , 2012 .