Analysis of the Reaction Rates in the Cathode Electrode of Polymer Electrolyte Fuel Cells

This paper presents a one-dimensional 1D theoretical study on the electrochemical phenomena in the cathode dual-layer electrode of polymer electrolyte fuel cells PEFCs . Following our previous work on transport and electrochemical processes in single-layer cathodes Y. Wang and X. H. Feng, J. Electrochem. Soc., 155, B1289 2008 , we extend the analysis to dual-layer catalyst layers, where the electrode is characterized by a two-layer configuration with specific properties assigned to each layer. A 1D model is developed, and explicit solutions are obtained for the profiles of the reaction rate and electrolyte phase potential across the dual-layer electrode. Effort is also made to analyze the solutions to explore the impacts of each layer’s properties on their performance i.e., the average reaction current in each layer with particular focus on the ratios of the ionic conductivity related to the ionomer content , specific area, and exchange current density related to Pt loading and reaction interface roughness . The results can be applied to optimize electrode performance through dual-layer configuration for high-performance cost-effective electrodes for PEFCs. © 2009 The Electrochemical Society. DOI: 10.1149/1.3056057 All rights reserved.

[1]  Edson A. Ticianelli,et al.  Localization of platinum in low catalyst loading electrodes to to attain high power densities in SPE fuel cells , 1988 .

[2]  T. Springer,et al.  Polymer Electrolyte Fuel Cell Model , 1991 .

[3]  A. Parthasarathy,et al.  Temperature Dependence of the Electrode Kinetics of Oxygen Reduction at the Platinum/Nafion® Interface—A Microelectrode Investigation , 1992 .

[4]  Sanjeev Mukerjee,et al.  Effect of sputtered film of platinum on low platinum loading electrodes on electrode kinetics of oxygen reduction in proton exchange membrane fuel cells , 1993 .

[5]  G. Squadrito,et al.  Influence of the structure in low-Pt loading electrodes for polymer electrolyte fuel cells , 1998 .

[6]  E. Passalacqua,et al.  Influence of Nafion loading in the catalyst layer of gas-diffusion electrodes for PEFC , 1999 .

[7]  A. J. Appleby,et al.  Design equations for optimized PEM fuel cell electrodes , 2000 .

[8]  Y. Bultel,et al.  Catalyst gradient for cathode active layer of proton exchange membrane fuel cell , 2000 .

[9]  Hubert A. Gasteiger,et al.  Handbook of fuel cells : fundamentals technology and applications , 2003 .

[10]  Sandip Mazumder,et al.  Rigorous 3-D mathematical modeling of PEM fuel cells. II. Model predictions with liquid water transport , 2003 .

[11]  P. Pickup,et al.  Ionic Conductivity of PEMFC Electrodes Effect of Nafion Loading , 2003 .

[12]  Chao-Yang Wang,et al.  Fundamental models for fuel cell engineering. , 2004, Chemical reviews.

[13]  Datong Song,et al.  Numerical optimization study of the catalyst layer of PEM fuel cell cathode , 2004 .

[14]  Hyunchul Ju,et al.  Experimental Validation of a PEM Fuel Cell Model by Current Distribution Data , 2004 .

[15]  A. Weber,et al.  Modeling transport in polymer-electrolyte fuel cells. , 2004, Chemical reviews.

[16]  Titichai Navessin,et al.  A method for optimizing distributions of Nafion and Pt in cathode catalyst layers of PEM fuel cells , 2005 .

[17]  Adam Z. Weber,et al.  Effects of Microporous Layers in Polymer Electrolyte Fuel Cells , 2005 .

[18]  Raghunathan Rengaswamy,et al.  Optimization Study of an Agglomerate Model for Platinum Reduction and Performance in PEM Fuel Cell Cathode , 2006 .

[19]  Chao-Yang Wang,et al.  Dynamics of polymer electrolyte fuel cells undergoing load changes , 2006 .

[20]  Chao-Yang Wang,et al.  A Multiphase Model for Cold Start of Polymer Electrolyte Fuel Cells , 2007 .

[21]  Xianguo Li,et al.  Analytical approach to polymer electrolyte membrane fuel cell performance and optimization , 2007 .

[22]  Suresh G. Advani,et al.  In Situ Characterization of the Catalyst Layer in a Polymer Electrolyte Membrane Fuel Cell , 2007 .

[23]  Partha P. Mukherjee,et al.  Direct Numerical Simulation Modeling of Bilayer Cathode Catalyst Layers in Polymer Electrolyte Fuel Cells , 2007 .

[24]  Yun Wang,et al.  Analysis of the Key Parameters in the Cold Start of Polymer Electrolyte Fuel Cells , 2007 .

[25]  Yun Wang,et al.  Analysis of Reaction Rates in the Cathode Electrode of Polymer Electrolyte Fuel Cell I. Single-Layer Electrodes , 2008 .

[26]  Hua Meng,et al.  Numerical studies of cold-start phenomenon in PEM fuel cells , 2008 .

[27]  Yun Wang,et al.  Modeling of two-phase transport in the diffusion media of polymer electrolyte fuel cells , 2008 .

[28]  Dokyol Lee,et al.  Effect of loading and distributions of Nafion ionomer in the catalyst layer for PEMFCs , 2008 .