Fiber Loop Ringdown Sensor for Potential Real-Time Monitoring of Cracks in Concrete Structures: An Exploratory Study

A fiber loop ringdown (FLRD) concrete crack sensor is described for the first time. A bare single mode fiber (SMF), without using other optical components or chemical coatings, etc., was utilized to construct the sensor head, which was driven by a FLRD sensor system. The performance of the sensor was evaluated on concrete bars with dimensions 20 cm × 5 cm × 5 cm, made in our laboratory. Cracks were produced manually and the responses of the sensor were recorded in terms of ringdown times. The sensor demonstrated detection of the surface crack width (SCW) of 0.5 mm, which leads to a theoretical SCW detection limit of 31 μm. The sensor's response to a cracking event is near real-time (1.5 s). A large dynamic range of crack detection ranging from a few microns (μm) to a few millimeters is expected from this sensor. With the distinct features, such as simplicity, temperature independence, near real-time response, high SCW detection sensitivity, and a large dynamic range, this FLRD crack sensor appears promising for detections of cracks when embedded in concrete.

[1]  T. Morse,et al.  A novel distributed optical crack sensor for concrete structures , 2000 .

[2]  Gangbing Song,et al.  Multi-functional smart aggregate-based structural health monitoring of circular reinforced concrete columns subjected to seismic excitations , 2010 .

[3]  Pierre Rossi,et al.  New method for detecting cracks in concrete using fibre optics , 1989 .

[4]  Kevin K. Lehmann,et al.  Evanescent field absorption in a passive optical fiber resonator using continuous-wave cavity ring-down spectroscopy , 2004 .

[5]  Chuji Wang,et al.  Fiber ringdown pressure sensors. , 2004, Optics letters.

[6]  Zhihao Chen,et al.  Strain Measurement by Fiber-Loop Ring-Down Spectroscopy and Fiber Mode Converter , 2008, IEEE Sensors Journal.

[7]  Il-Bum Kwon,et al.  Monitoring of fatigue damage of composite structures by using embedded intensity-based optical fiber sensors , 2001 .

[8]  G. Berden,et al.  Cavity ring-down spectroscopy: Experimental schemes and applications , 2000 .

[9]  T. K. Gangopadhyay,et al.  Fibre Bragg gratings in structural health monitoring—Present status and applications , 2008 .

[10]  Kenneth T. V. Grattan,et al.  Fiber optic sensor technology: an overview , 2000 .

[11]  F. Ansari,et al.  Kinematics of Crack Formation in Cementitious Composites by Fiber Optics , 1993 .

[12]  Masayasu Ohtsu,et al.  The history and development of acoustic emission in concrete engineering , 1996 .

[13]  Wolfgang R. Habel,et al.  Embedded Quasi-Distributed Fiber-Optic Sensors for the Long-Term Monitoring of the Grouting Area of Rock Anchors in a Large Gravity Dam , 1999 .

[14]  Alan D. Kersey,et al.  Fiber optic sensors in concrete structures: a review , 1996 .

[15]  Nicholas J. Carino,et al.  Health monitoring of civil infrastructures , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[16]  Anand Asundi,et al.  Structural health monitoring of smart composite materials by using EFPI and FBG sensors , 2003 .

[17]  S. Parivallal,et al.  Experimental studies on fiber optic sensors embedded in concrete , 2010 .

[18]  James M. W. Brownjohn,et al.  Development of fiber Bragg grating sensors for monitoring civil infrastructure , 2005 .

[19]  Perry Ping Shum,et al.  Cavity ring-down long-period fibre grating strain sensor , 2007 .

[20]  Michael Forde,et al.  Application of infrared thermography to the non-destructive testing of concrete and masonry bridges , 2003 .

[21]  J. Casas,et al.  Application of optical fiber distributed sensing to health monitoring of concrete structures , 2013 .

[22]  A. Mendez,et al.  Applications Of Embedded Optical Fiber Sensors In Reinforced Concrete Buildings And Structures , 1990, Other Conferences.

[23]  Gangbing Song,et al.  Health monitoring and rehabilitation of a concrete structure using intelligent materials , 2006 .

[24]  Alison B. Flatau,et al.  Review Paper: Health Monitoring of Civil Infrastructure , 2003 .

[25]  George Stewart,et al.  An investigation of an optical fibre amplifier loop for intra-cavity and ring-down cavity loss measurements , 2001 .

[26]  Claire Vallance.  Innovations in cavity ringdown spectroscopy , 2005 .

[27]  Gangbing Song,et al.  Recent applications of fiber optic sensors to health monitoring in civil engineering , 2004 .

[28]  T. K. Gangopadhyay,et al.  Fibre Bragg grating strain sensor and study of its packaging material for use in critical analysis on steel structure , 2009 .

[29]  A. O’Keefe,et al.  Cavity ring‐down optical spectrometer for absorption measurements using pulsed laser sources , 1988 .

[30]  Chuji Wang,et al.  Fiber Loop Ringdown — a Time-Domain Sensing Technique for Multi-Function Fiber Optic Sensor Platforms: Current Status and Design Perspectives , 2009, Sensors.

[31]  Gangbing Song,et al.  Concrete structural health monitoring using embedded piezoceramic transducers , 2007 .

[32]  Kenneth W. Busch,et al.  Cavity-ringdown spectroscopy : an ultratrace-absorption measurement technique , 1999 .

[33]  Nicholas J. Carino,et al.  The Impact-Echo Method: An Overview , 2001 .

[34]  Hans-Peter Loock,et al.  Fiber-loop ring-down spectroscopy , 2002 .

[35]  David J. Daniels,et al.  Surface-Penetrating Radar , 1996 .

[36]  L M Sim,et al.  Damage detection and assessment in fibre-reinforced composite structures with embedded fibre optic sensors-review , 2002 .

[37]  Gangbing Song,et al.  Health monitoring of reinforced concrete shear walls using smart aggregates , 2009 .

[38]  Chuji Wang,et al.  Fiber loop ringdown for physical sensor development: pressure sensor. , 2004, Applied optics.

[39]  Perry Ping Shum,et al.  Cavity ring-down long period grating pressure sensor , 2010 .

[40]  Guiyun Kai,et al.  Temperature and strain sensor based on weak LPG and fiber ring down , 2007, European Workshop on Optical Fibre Sensors.

[41]  Byoungho Lee,et al.  Review of the present status of optical fiber sensors , 2003 .

[42]  Chamini Herath,et al.  Fabrication and characterization of fiber loop ringdown evanescent field sensors , 2010 .

[43]  Hans-Peter Loock,et al.  Chemical Sensing Using Fiber Cavity Ring-Down Spectroscopy , 2010, Sensors.

[44]  Zhihao Chen,et al.  Multimode fiber ring-down pressure sensor , 2007 .

[45]  Paul Rabinowitz,et al.  Cavity ringdown strain gauge. , 2004, Optics letters.

[46]  D. Inaudi,et al.  Submillimeter crack detection with brillouin-based fiber-optic sensors , 2009, IEEE Sensors Journal.

[47]  A. Mbi,et al.  An alternative method to develop fibre grating temperature sensors using the fibre loop ringdown scheme , 2006 .

[48]  Gangbing Song,et al.  Smart aggregates: multi-functional sensors for concrete structures—a tutorial and a review , 2008 .

[49]  Max B. Reid,et al.  Temperature dependence of fiber optic Bragg gratings at low temperatures , 1998 .

[50]  Venu Gopal Madhav Annamdas.  Review on Developments in Fiber Optical Sensors and Applications , 2012 .

[51]  Christopher K.Y. Leung,et al.  Fiber optic sensors in concrete: the future? , 2001 .