Optimization of Variable-Camber Continuous Trailing-Edge Flap Configuration for Drag Reduction

The variable-camber continuous trailing-edge flap is a novel control surface technology designed to serve as an aeroelastic wing shaping control device. Capable of minimizing drag throughout an air...

[1]  Eric Ting,et al.  A Mission-Adaptive Variable Camber Flap Control System to Optimize High Lift and Cruise Lift-to-Drag Ratios of Future N+3 Transport Aircraft , 2013 .

[2]  Nhan T. Nguyen,et al.  Aeroestructural Design Optimization of a Subsonic Wing with Continuous Morphing Trailing Edge , 2017 .

[3]  J. Szodruch,et al.  Variable wing camber for transport aircraft , 1988 .

[4]  Joaquim R. R. A. Martins,et al.  Aerodynamic Shape Optimization of an Adaptive Morphing Trailing-Edge Wing , 2015 .

[5]  Sonia Lebofsky,et al.  Wind Tunnel Investigation of a Flexible Wing High-Lift Configuration with a Variable Camber Continuous Trailing Edge Flap Design , 2015 .

[6]  Eric Ting,et al.  Multi-Objective Flight Control for Drag Minimization and Load Alleviation of High-Aspect Ratio Flexible Wing Aircraft , 2017 .

[7]  Nhan T. Nguyen,et al.  Unsteady Aeroservoelastic Modeling of Flexible Wing Generic Transport Aircraft with Variable Camber Continuous Trailing Edge Flap , 2015 .

[8]  Joaquim R. R. A. Martins,et al.  Aerostructural Design Optimization of an Adaptive Morphing Trailing Edge Wing , 2015 .

[9]  Joaquim R. R. A. Martins,et al.  Aerostructural optimization of the common research model configuration , 2014 .

[10]  Gareth D. Padfield,et al.  The birth of flight control: An engineering analysis of the Wright brothers’ 1902 glider , 2003, The Aeronautical Journal (1968).

[11]  Edmund Pendleton,et al.  Active Aeroelastic Wing Flight Research Program: Technical Program and Model Analytical Development , 2000 .

[12]  Nhan Nguyen,et al.  Aeroelastic Modeling of Elastically Shaped Aircraft Concept via Wing Shaping Control for Drag Reduction , 2012 .

[13]  Nhan T. Nguyen,et al.  A Multi-Objective Flight Control Approach for Performance Adaptive Aeroelastic Wing , 2015 .

[14]  Eric Ting,et al.  Aerodynamic Modeling of Transonic Aircraft Using Vortex Lattice Coupled with Transonic Small Disturbance for Conceptual Design , 2016 .

[15]  U. Kaul,et al.  A 3-D Drag Optimization Study of Variable Camber Continuous Trailing Edge Flap (VCCTEF) Using OVERFLOW , 2014 .

[16]  Eric Ting,et al.  Nonlinear Large Deflection Theory with Modified Aeroelastic Lifting Line Aerodynamics for a High Aspect Ratio Flexible Wing , 2017 .

[17]  Eric Ting,et al.  Development of an Integrated Nonlinear Aeroservoelastic Flight Dynamic Model of the Truss-Braced Wing Aircraft , 2017 .

[18]  Sean Shan-Min Swei,et al.  Development of Mission Adaptive Digital Composite Aerostructure Technologies (MADCAT) , 2017 .

[19]  Sonia Lebofsky,et al.  Optimization for Load Alleviation of Truss-Braced Wing Aircraft With Variable Camber Continuous Trailing Edge Flap , 2015 .

[20]  Nhan T. Nguyen,et al.  An Integral Boundary Layer Direct Method Applied to 2D Transonic Small-Disturbance Equations , 2016 .

[21]  Sonia Lebofsky,et al.  Experimental Investigation of a Flexible Wing with a Variable Camber Continuous Trailing Edge Flap Design , 2014 .

[22]  Stephen Smith,et al.  AFTI/F-111 Mission Adaptive Wing flight research program , 1988 .

[23]  S. S. Stahara.  Operational manual for two-dimensional transonic code TSFOIL , 1978 .

[24]  Nhan T. Nguyen,et al.  LMI-based multiobjective optimization and control of flexible aircraft using VCCTEF , 2015 .

[25]  Eli Livne,et al.  The design, construction, and tests of a concept aeroelastic wind tunnel model of a high-lift variable camber continuous trailing edge flap (HL-VCCTEF) wing configuration , 2015 .

[26]  Trong T. Bui,et al.  Aerodynamic Flight-Test Results for the Adaptive Compliant Trailing Edge , 2016 .

[27]  Shayan Moini-Yekta,et al.  Use of a Viscous Flow Simulation Code for Static Aeroelastic Analysis of a Wing at High-Lift Conditions , 2015 .

[28]  Sonia Lebofsky,et al.  Multidisciplinary Drag Optimization of Reduced Stiffness Flexible Wing Aircraft With Variable Camber Continuous Trailing Edge Flap , 2015 .

[29]  Nhan Nguyen,et al.  Elastically Shaped Wing Optimization and Aircraft Concept for Improved Cruise Efficiency , 2013 .

[30]  Nhan Nguyen,et al.  Development of Variable Camber Continuous Trailing Edge Flap for Performance Adaptive Aeroelastic Wing , 2015 .

[31]  Nhan T. Nguyen,et al.  Adaptive Linear Quadratic Gaussian Optimal Control Modification for Flutter Suppression of Adaptive Wing , 2015 .

[32]  Joaquim R. R. A. Martins,et al.  Aerostructural design optimization of a continuous morphing trailing edge aircraft for improved mission performance , 2016 .

[33]  Eric Ting,et al.  Aerodynamic Load Analysis of a Variable Camber Continuous Trailing Edge Flap System on a Flexible Wing Aircraft , 2015 .

[34]  Sonia Lebofsky,et al.  Aeroelastic Modeling and Drag Optimization of Flexible Wing Aircraft with Variable Camber Continuous Trailing Edge Flap , 2014 .

[35]  Ronald Slingerland,et al.  Aerodynamic Design of Transport Aircraft , 2009 .

[36]  Yan Liu,et al.  Robust Optimization of Variable-Camber Continuous Trailing-Edge Flap Static Aeroelastic Action , 2017 .

[37]  Michael J. Aftosmis,et al.  Optimization of Flexible Wings with Distributed Flaps at Off-Design Conditions , 2016 .

[38]  Bret Stanford,et al.  Static and Dynamic Aeroelastic Tailoring With Variable Camber Control , 2016 .

[39]  John C. Vassberg,et al.  Development of a Common Research Model for Applied CFD Validation Studies , 2008 .

[40]  Bret Stanford,et al.  Optimal Control Surface Layout for an Aeroservoelastic Wingbox. , 2017, AIAA journal. American Institute of Aeronautics and Astronautics.

[41]  Nhan T. Nguyen,et al.  Adaptive Aeroelastic Wing Shape Optimization for High-Lift Configurations , 2015 .

[42]  Eric Ting,et al.  Aero-Structural Optimization of Variable Camber Continuous Trailing Edge Flap Configurations Using Transonic and Viscous Potential Flow Method , 2017 .

[43]  Eric Ting,et al.  Flutter Analysis of Mission-Adaptive Wing with Variable Camber Continuous Trailing Edge Flap , 2014 .

[44]  Eric Ting,et al.  Real-Time Adaptive Least-Squares Drag Minimization for Performance Adaptive Aeroelastic Wing , 2016 .

[45]  Zhiqiang Zhou,et al.  Low-Weight Low-Drag Truss-Braced Wing Design Using Variable Camber Continuous Trailing Edge Flaps , 2015 .

[46]  Eric Ting,et al.  Transonic and Viscous Potential Flow Method Applied to Flexible Wing Transport Aircraft , 2017 .