Nano-Based Drilling Fluids: A Review

Nanomaterials are engineered materials with at least one dimension in the range of 1–100 nm. Nanofluids—nanoscale colloidal suspensions containing various nanomaterials—have distinctive properties and offer unprecedented potential for various sectors such as the energy, cosmetic, aerospace and biomedical industries. Due to their unique physico-chemical properties, nanoparticles are considered as very good candidates for smart drilling fluid formulation, i.e., fluids with tailor-made rheological and filtration properties. However, due to the great risk of adapting new technologies, their application in oil and gas industry is not, to date, fully implemented. Over the last few years, several researchers have examined the use of various nanoparticles, from commercial to custom made particles, to formulate drilling fluids with enhanced properties that can withstand extreme downhole environments, particularly at high pressure and high temperature (HP/HT) conditions. This article summarizes the recent progress made on the use of nanoparticles as additives in drilling fluids in order to give such fluids optimal rheological and filtration characteristics, increase shale stability and achieve wellbore strengthening. Type, size and shape of nanoparticles, volumetric concentration, addition of different surfactants and application of an external magnetic field are factors that are critically evaluated and are discussed in this article. The results obtained from various studies show that nanoparticles have a great potential to be used as drilling fluid additives in order to overcome stern drilling problems. However, there are still challenges that should be addressed in order to take full advantage of the capabilities of such particles. Finally the paper identifies and discusses opportunities for future research.

[1]  Mihaela Manea.  DESIGNING OF DRILLING FLUIDS USING NANO SCALE POLYMER ADDITIVES , 2012 .

[2]  D. Mowla,et al.  Decreasing of water loss and mud cake thickness by CMC nanoparticles in mud drilling , 2012 .

[3]  Amir Hamzah,et al.  Water based mud lifting capacity improvement by multiwall carbon nanotubes additive , 2011 .

[4]  James M Tour,et al.  Graphene oxide as a high-performance fluid-loss-control additive in water-based drilling fluids. , 2012, ACS applied materials & interfaces.

[5]  Steven Young,et al.  Nanotechnology for Oilfield Applications - Hype or Reality? , 2012 .

[6]  Qinglin Wu,et al.  Cellulose nanoparticles as modifiers for rheology and fluid loss in bentonite water-based fluids. , 2015, ACS applied materials & interfaces.

[7]  J. Philip,et al.  Review on thermal properties of nanofluids: Recent developments. , 2015, Advances in colloid and interface science.

[8]  C. Ghotbi,et al.  The Role of Carbon Nanotubes in Improving Thermal Stability of Polymeric Fluids: Experimental and Modeling , 2016 .

[9]  Geir Hareland,et al.  Wellbore Strengthening- Nano-Particle Drilling Fluid Experimental Design Using Hydraulic Fracture Apparatus , 2013 .

[10]  M. Ziaja,et al.  An Experimental Investigation on use of Nanoparticles as Fluid Loss Additives in a Surfactant – Polymer Based Drilling Fluid , 2011, IPTC 2011.

[11]  Babak Fazelabdolabadi,et al.  Thermal and rheological properties improvement of drilling fluids using functionalized carbon nanotubes , 2015, Applied Nanoscience.

[12]  Z. Vryzas,et al.  Incorporation of Fe3O4 Nanoparticles as Drilling Fluid Additives for Improved Drilling Operations , 2016 .

[13]  Yongsheng Guo,et al.  Preparation of Well-Dispersed Silver Nanoparticles for Oil-Based Nanofluids , 2010 .

[14]  Dimitrios I. Gerogiorgis,et al.  Development and Parameter Estimation for a Multivariate Herschel-Bulkley Rheological Model of a Nanoparticle-Based Smart Drilling Fluid , 2015 .

[15]  Wenqin Dai,et al.  Novel hydrophobic associated polymer based nano-silica composite with core-shell structure for intelligent drilling fluid under ultra-high temperature and ultra-high pressure , 2015 .

[16]  Z. Vryzas,et al.  Utilization of Iron Oxide Nanoparticles in Drilling Fluids Improves Fluid Loss and Formation Damage Characteristics , 2015 .

[17]  Nor Azwadi Che Sidik,et al.  A review on preparation methods and challenges of nanofluids , 2014 .

[18]  M. Soleymani,et al.  SYNTHESIS OF ALUMINA/POLYACRYLAMIDE NANOCOMPOSITE AND ITS INFLUENCE ON VISCOSITY OF DRILLING FLUID , 2015 .

[19]  M. Amani,et al.  Rheology of mineral oil-SiO2 nanofluids at high pressure and high temperatures , 2014 .

[20]  Wenhua Yu,et al.  Review and Comparison of Nanofluid Thermal Conductivity and Heat Transfer Enhancements , 2008 .

[21]  Sean Lee,et al.  Nano Graphene Application Improving Drilling Fluids Performance , 2015 .

[22]  Z. M. W. Haindade,et al.  Mitigating Loss Circulation And Differential Sticking Problems Using Silicon Nanoparticles , 2011 .

[23]  Ziad Abdullrahman Alabdullatif,et al.  Preliminary Test Results of Nano-based Drilling Fluids for Oil and Gas Field Application , 2011 .

[24]  S. Osisanya,et al.  Development of New Smart Drilling Fluids Using Nano-Materials for Unconventional Reservoirs , 2016 .

[25]  Robello Samuel,et al.  Effect of CuO and ZnO nanofluids in xanthan gum on thermal, electrical and high pressure rheology of water-based drilling fluids , 2014 .

[26]  Peter E. Clark,et al.  Drilling mud rheology and the API recommended measurements , 1995 .

[27]  N. M. Rashid,et al.  Effect of Nanomaterial on the Rheology of Drilling Fluids , 2014 .

[28]  J. Abdo,et al.  Clay nanoparticles modified drilling fluids for drilling of deep hydrocarbon wells , 2013 .

[29]  H. Bilgesu,et al.  Impact of Nanomaterials on the Rheological and Filtration Properties of Water-Based Drilling Fluids , 2016 .

[30]  Hisham A. Nasr-El-Din,et al.  Nanoparticle-Based Drilling Fluids for Minimizing Formation Damage in HP/HT Applications , 2016 .

[31]  Costas A. Charitidis,et al.  Manufacturing nanomaterials: from research to industry , 2014 .

[32]  Hao Zhang,et al.  Strengthening shale wellbore with silica nanoparticles drilling fluid , 2016 .

[33]  C. Choi,et al.  Preparation and heat transfer properties of nanoparticle-in-transformer oil dispersions as advanced energy-efficient coolants , 2008 .

[34]  K. Shahbazi,et al.  Experimental investigation of the effects of SnO2 nanoparticles and KCl salt on a water base drilling fluid properties , 2016 .

[35]  S. Akhtarmanesh,et al.  Improvement of wellbore stability in shale using nanoparticles , 2013 .

[36]  Qinglin Wu,et al.  Soy Protein Isolate As Fluid Loss Additive in Bentonite-Water-Based Drilling Fluids. , 2015, ACS applied materials & interfaces.

[37]  Dimitrios I. Gerogiorgis,et al.  Experimentally Validated First-Principles Multivariate Modeling for Rheological Study and Design of Complex Drilling Nanofluid Systems , 2017 .

[38]  Oscar M. Contreras,et al.  Wellbore Strengthening In Sandstones by Means of Nanoparticle-Based Drilling Fluids , 2014 .

[39]  Mukul M. Sharma,et al.  A New Family of Nanoparticle Based Drilling Fluids , 2012 .

[40]  Qinglin Wu,et al.  Cellulose Nanocrystals and Polyanionic Cellulose as Additives in Bentonite Water-Based Drilling Fluids: Rheological Modeling and Filtration Mechanisms , 2016 .

[41]  Steven Young,et al.  Application of Nanotechnology in Drilling Fluids , 2012 .

[42]  M. Mohammadi,et al.  Multifunctional Nanoadditive in Water Based Drilling Fluid for Improving Shale Stability , 2015 .

[43]  Z. Vryzas,et al.  Characterization of Filter Cake Generated by Nanoparticle-Based Drilling Fluid for HP/HT Applications , 2017 .

[44]  Chris Carpenter.  Development of Novel Drilling-Fluid Nanoparticles for Enhanced Drilling Operations , 2016 .

[45]  O. Orodu,et al.  Optimizing the rheological properties of silica nano-modified bentonite mud using overlaid contour plot and estimation of maximum or upper shear stress limit , 2017 .

[46]  Oscar M. Contreras,et al.  Experimental Investigation on Wellbore Strengthening In Shales by Means of Nanoparticle-Based Drilling Fluids , 2014 .

[47]  Mehran Sadeghalvaad,et al.  The effect of the TiO2/polyacrylamide nanocomposite on water-based drilling fluid properties , 2015 .

[48]  M. Chenevert,et al.  Minimizing Water Invasion in Shales Using Nanoparticles , 2009 .

[49]  Z. Vryzas,et al.  Development and Testing of Novel Drilling Fluids Using Fe 2 O 3 and SiO 2 Nanoparticles for Enhanced Drilling Operations , 2015 .

[50]  R. Gupta,et al.  Flow Behavior of Nanoparticle Stabilized Drilling Fluids and Effect of High Temperature Aging , 2011 .

[51]  J. Friedheim,et al.  Nanotechnology Application in Drilling Fluids , 2013 .

[52]  Kai Zhang,et al.  Review of nanofluids for heat transfer applications , 2009 .

[53]  Christopher J. Tighe,et al.  Scale Up Production of Nanoparticles: Continuous Supercritical Water Synthesis of Ce–Zn Oxides , 2013 .

[54]  G. Hareland,et al.  A field application of nanoparticle-based invert emulsion drilling fluids , 2015, Journal of Nanoparticle Research.

[55]  Z. Vryzas,et al.  A comprehensive approach for the development of new magnetite nanoparticles giving smart drilling fluids with superior properties for HP/HT applications 5204 , 2019 .

[56]  M. Husein,et al.  Novel Nanoparticle-Based Drilling Fluid with Improved Characteristics , 2012 .

[57]  M. Shahri.  Quantification of Wellbore Strengthening Mechanisms: Comprehensive Parametric Analysis , 2015 .

[58]  A. Khodadadi,et al.  An Improvement in Thermal and Rheological Properties of Water-based Drilling Fluids Using Multiwall Carbon Nanotube (MWCNT) , 2012 .

[59]  Chok Vui Soon,et al.  Rheological Behaviour of Graphene Nano-sheets in Hydrogenated Oil-based Drilling Fluid ☆ , 2016 .

[60]  R. Nagarajan,et al.  Effect of Nanofluids of CuO and ZnO in Polyethylene Glycol and Polyvinylpyrrolidone on the Thermal, Electrical, and Filtration-Loss Properties of Water-Based Drilling Fluids , 2016 .

[61]  T. Mohiuddin,et al.  Experimental Investigation of Drilling Fluid Performance as Nanoparticles , 2013 .

[62]  A. R. Ismail,et al.  The novel approach for the enhancement of rheological properties of water-based drilling fluids by using multi-walled carbon nanotube, nanosilica and glass beads , 2016 .

[63]  Dimitrios I. Gerogiorgis,et al.  Effect of temperature on the rheological properties of neat aqueous Wyoming sodium bentonite dispersions , 2017 .

[64]  Mortadha Alsaba,et al.  Application of In-House Prepared Nanoparticles as Filtration Control Additive to Reduce Formation Damage , 2014 .

[65]  S. Yusup,et al.  Study on the Effect of Nanoparticle Loadings in Base Fluids for Improvement of Drilling Fluid Properties , 2015 .

[66]  Dimitrios I. Gerogiorgis,et al.  First-principles Rheological Modelling and Parameter Estimation for Nanoparticle-based Smart Drilling Fluids , 2016 .

[67]  Jamil Abdo,et al.  Nano-Enhanced Drilling Fluids: Pioneering Approach to Overcome Uncompromising Drilling Problems , 2012 .

[68]  A. R. Ismail,et al.  Novel zinc oxide nanoparticles deposited acrylamide composite used for enhancing the performance of water-based drilling fluids at elevated temperature conditions , 2016 .