Non-Contact Ultrasonic Inspection of Impact Damage in Composite Laminates by Visualization of Lamb wave Propagation

This study demonstrates a rapid non-contact ultrasonic inspection technique by visualization of Lamb wave propagation for detecting impact damage in carbon fiber reinforced polymer (CFRP) laminates. We have developed an optimized laser ultrasonic imaging system, which consists of a rapid pulsed laser scanning unit for ultrasonic generation and a laser Doppler vibrometer (LDV) unit for ultrasonic reception. CFRP laminates were subjected to low-velocity impact to introduce barely visible impact damage. In order to improve the signal-to-noise ratio of the detected ultrasonic signal, retroreflective tape and a signal averaging process were used. We thus successfully visualized the propagation of the pulsed Lamb A0 mode in the CFRP laminates without contact. Interactions between the Lamb waves and impact damage were clearly observed and the damage was easily detected through the change in wave propagation. Furthermore, we demonstrated that the damage could be rapidly detected without signal averaging. This method has significant advantages in detecting damage compared to the conventional method using a contact resonant ultrasonic transducer due to the absence of the ringing phenomenon when using the LDV.

[1]  Junji Takatsubo,et al.  An NDT technique for composite structures using visualized Lamb-wave propagation , 2007 .

[2]  Constantinos Soutis,et al.  Detection of Low-velocity Impact Damage in Composite Plates using Lamb Waves , 2004 .

[3]  Hoon Sohn,et al.  Delamination detection in composites through guided wave field image processing , 2011 .

[4]  Chan-Yik Park,et al.  Laser ultrasonic anomalous wave propagation imaging method with adjacent wave subtraction: Application to actual damages in composite wing , 2012 .

[5]  Lin Ye,et al.  Guided Lamb waves for identification of damage in composite structures: A review , 2006 .

[6]  Wieslaw Ostachowicz,et al.  Impact induced damage assessment by means of Lamb wave image processing , 2018 .

[7]  Yun-Kyu An,et al.  Impact-Induced Delamination Detection of Composites Based on Laser Ultrasonic Zero-Lag Cross-Correlation Imaging , 2016 .

[8]  P. Cawley,et al.  The interaction of Lamb waves with delaminations in composite laminates , 1993 .

[9]  Takahiro Hayashi,et al.  Multiple reflections of Lamb waves at a delamination. , 2002, Ultrasonics.

[10]  Cara A. C. Leckey,et al.  Characterization of impact damage in composite laminates using guided wavefield imaging and local wavenumber domain analysis. , 2013, Ultrasonics.

[11]  Junji Takatsubo,et al.  A novel technique for visualizing ultrasonic waves in general solid media by pulsed laser scan , 2008 .

[12]  Bo Feng,et al.  Interaction of lamb waves with the edges of a delamination in CFRP composites , 2017, 2017 IEEE International Workshop on Metrology for AeroSpace (MetroAeroSpace).

[13]  Hoon Sohn,et al.  Visualization of hidden delamination and debonding in composites through noncontact laser ultrasonic scanning , 2014 .

[14]  Fereidoon Delfanian,et al.  Experimental Observation of Phased Array Guided Wave Application in Composite Materials , 2017 .

[15]  Krishnan Balasubramaniam,et al.  Lamb wave based ultrasonic imaging of interface delamination in a composite T-joint , 2011 .

[16]  H. Tsuda,et al.  Ultrasonic inspection of adhesively bonded CFRP/aluminum joints using pulsed laser scanning , 2017 .

[17]  Zenghua Liu,et al.  Baseline-free delamination inspection in composite plates by synthesizing non-contact air-coupled Lamb wave scan method and virtual time reversal algorithm , 2015 .

[18]  Jung-Ryul Lee,et al.  Laser ultrasonic anomalous wave propagation imaging method with adjacent wave subtraction: Algorithm , 2012 .

[19]  Massimo Ruzzene,et al.  Frequency-wavenumber domain analysis of guided wavefields. , 2011, Ultrasonics.

[20]  Junji Takatsubo,et al.  Generation Laser Scanning Method for the Visualization of Ultrasounds Propagating on a 3-D Object with an Arbitrary Shape , 2007 .

[21]  M. Enoki,et al.  Mid‐infrared pulsed laser ultrasonic testing for carbon fiber reinforced plastics , 2017, Ultrasonics.

[22]  M. Lowe,et al.  DISPERSE: A GENERAL PURPOSE PROGRAM FOR CREATING DISPERSION CURVES , 1997 .

[23]  Kenji Kitamura,et al.  Mid IR pulsed light source for laser ultrasonic testing of carbon-fiber-reinforced plastic , 2015 .

[24]  J. Takatsubo,et al.  Lamb wave method for quick inspection of impact-induced delamination in composite laminates , 2004 .