A review of characterisation and parameters identification of materials constitutive and damage models: From normalised direct approach to most advanced inverse problem resolution

[1]  B. Langrand,et al.  A methodology for the viscoplastic behaviour characterisation of spot-weld heat affected materials , 2016 .

[2]  Gregory Haugou,et al.  Design of a pre-stretched tension Hopkinson bar device: Configuration, tail corrections, and numerical validation , 2016 .

[3]  D. Notta-Cuvier,et al.  An innovative procedure for characterising a coupled elastoplastic damage model of behaviour using the Virtual Fields Method , 2015 .

[4]  Michael A. Sutton,et al.  Identification of the Dynamic Properties of Al 5456 FSW Welds Using the Virtual Fields Method , 2015, Journal of Dynamic Behavior of Materials.

[5]  Eric Markiewicz,et al.  Analysis of the riveting process forming mechanisms , 2014 .

[6]  Eric Markiewicz,et al.  Identification of Johnson–Cook's Viscoplastic Model Parameters Using the Virtual Fields Method: Application to Titanium Alloy Ti6Al4V , 2013 .

[7]  Fabrice Pierron,et al.  Ultra‐High‐Speed Full‐Field Deformation Measurements on Concrete Spalling Specimens and Stiffness Identification with the Virtual Fields Method , 2012 .

[8]  Michel Grédiac,et al.  The Virtual Fields Method: Extracting Constitutive Mechanical Parameters from Full-field Deformation Measurements , 2012 .

[9]  D. Agard,et al.  Microtubule nucleation by γ-tubulin complexes , 2011, Nature Reviews Molecular Cell Biology.

[10]  Michael R Wisnom,et al.  Full-Field Strain Measurement and Identification of Composites Moduli at High Strain Rate with the Virtual Fields Method , 2011 .

[11]  Baoqiao Guo,et al.  An alternative to modal analysis for material stiffness and damping identification from vibrating plates , 2010 .

[12]  Magnus Langseth,et al.  Stress–strain behaviour of aluminium alloys at a wide range of strain rates , 2009 .

[13]  Thierry Millot,et al.  Submarine hull integrity under blast loading , 2009 .

[14]  Hubert W. Schreier,et al.  Image Correlation for Shape, Motion and Deformation Measurements: Basic Concepts,Theory and Applications , 2009 .

[15]  B. Boyce,et al.  The dynamic tensile behavior of tough, ultrahigh-strength steels at strain-rates from 0.0002 s−1 to 200 s−1 ☆ , 2009 .

[16]  M. Bonnet,et al.  Overview of Identification Methods of Mechanical Parameters Based on Full-field Measurements , 2008 .

[17]  Eric Markiewicz,et al.  Identification of the spongy bone mechanical behavior under compression loads: numerical simulation versus experimental results , 2007 .

[18]  Fabrice Pierron,et al.  Applying the Virtual Fields Method to the identification of elasto-plastic constitutive parameters , 2006 .

[19]  M. Finn,et al.  High strain rate tensile testing of automotive aluminum alloy sheet , 2005 .

[20]  Fabrice Pierron,et al.  Identification of stiffness and damping properties of thin isotropic vibrating plates using the virtual fields method: theory and simulations , 2005 .

[21]  T. Wierzbicki,et al.  Calibration and evaluation of seven fracture models , 2005 .

[22]  John W. Gillespie,et al.  Hopkinson bar experimental technique: A critical review , 2004 .

[23]  Karl-Gustaf Sundin,et al.  High strain-rate tensile testing and viscoplastic parameter identification using microscopic high-speed photography , 2004 .

[24]  G. Gary,et al.  Contribution to the definition of a partial overlapping plastic strain rates domain for moderate loadings – application to tensile testing on metallic materials , 2004 .

[25]  Ahmed Benallal,et al.  Flow and fracture characteristics of aluminium alloy AA5083–H116 as function of strain rate, temperature and triaxiality , 2004 .

[26]  T. Børvik,et al.  A computational model of viscoplasticity and ductile damage for impact and penetration , 2001 .

[27]  Ezio Cadoni,et al.  Study of the mechanical properties of plain concrete under dynamic loading , 1999 .

[28]  Fabrice Pierron,et al.  Novel procedure for complete in-plane composite characterization using a single T-shaped specimen , 1999 .

[29]  Eric Markiewicz,et al.  Identification technique of constitutive model parameters for crashworthiness modelling , 1999 .

[30]  J. Klepaczko.  Remarks on impact shearing , 1998 .

[31]  Eric Markiewicz,et al.  An inverse approach to determine the constitutive model parameters from axial crushing of thin-walled square tubes , 1998 .

[32]  Y. Surrel,et al.  DIRECT IDENTIFICATION OF ELASTIC CONSTANTS OF ANISOTROPIC PLATES BY MODAL ANALYSIS: EXPERIMENTAL RESULTS , 1998 .

[33]  Jd Jan Janssen,et al.  Determination of the elasto-plastic properties of aluminium using a mixed numerical–experimental method , 1998 .

[34]  Michel Grédiac,et al.  Direct Identification of Elastic Constants of Anisotropic Plates by Modal Analysis: Theoretical and Numerical Aspects , 1996 .

[35]  Yves Surrel,et al.  Moire and grid methods: a signal-processing approach , 1994, Other Conferences.

[36]  M. Montagnani,et al.  Study of the true tensile stress-strain diagram of plain concrete with real size aggregate ; need for and design of a large Hopkinson bar bundle , 1994 .

[37]  F. Hemez,et al.  Updating finite element dynamic models using an element-by-element sensitivity methodology , 1993 .

[38]  M. Grédiac,et al.  A New Method for Determination of Bending Rigidities of Thin Anisotropic Plates , 1990 .

[39]  J. Chaboche,et al.  Mechanics of Solid Materials , 1990 .

[40]  T. Weerasooriya.  The MTL Torsional Split-Hopkinson Bar , 1990 .

[41]  H. G. Natke,et al.  On the parameter identification of elastomechanical systems using input and output residuals , 1984 .

[42]  T. Nicholas.  Tensile testing of materials at high rates of strain , 1981 .

[43]  A. L. Gurson,et al.  Porous Rigid Plastic Materials Containing Rigid Inclusions; Yield Function, Plastic Potential and Void Nucleation , 1976 .

[44]  U. S. Lindholm.  Some experiments with the split hopkinson pressure bar , 1964 .

[45]  S. C. Hunter,et al.  The Dynamic Compression Testing of Solids by the Method of the Split Hopkinson Pressure Bar , 1963 .

[46]  J. D. Campbell,et al.  Tensile Testing of Materials at Impact Rates of Strain , 1960 .

[47]  Marcus Stoffel,et al.  Phenomenological and micromechanical viscoplastic laws applied to high strain rate deformations of plates , 2009 .

[48]  J. Kajberg,et al.  Viscoplastic parameter estimation by high strain-rate experiments and inverse modelling – Speckle measurements and high-speed photography , 2007 .

[49]  Odd Sture Hopperstad,et al.  On the influence of stress triaxiality and strain rate on the behaviour of a structural steel. Part II. Numerical study , 2003 .

[50]  T. Børvik,et al.  On the influence of stress triaxiality and strain rate on the behaviour of a structural steel. Part I. Experiments , 2003 .

[51]  Eric Markiewicz,et al.  Material behaviour law identification for the various zones of the spot-weld under quasi-static loadings , 2001 .

[52]  Eric Markiewicz,et al.  Identification of nonlinear dynamic behavior and failure for riveted joint assemblies , 2000 .

[53]  J. R. Klepaczko,et al.  An experimental technique for shear testing at high and very high strain rates. The case of a mild steel , 1994 .

[54]  Krzysztof Patorski,et al.  Handbook of the moiré fringe technique , 1993 .

[55]  G. R. Johnson,et al.  Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures , 1985 .

[56]  V. Tvergaard.  Material failure by void coalescence in localized shear bands , 1982 .

[57]  A. C. Mackenzie,et al.  On the influence of state of stress on ductile failure initiation in high strength steels , 1977 .

[58]  J. Dainty.  Laser speckle and related phenomena , 1975 .

[59]  Percy Williams Bridgman,et al.  Studies in large plastic flow and fracture , 1964 .