A Wideband Millimeter-Wave Circularly Polarized Antenna With 3-D Printed Polarizer

This paper presents a wideband circularly polarized millimeter-wave (mmw) antenna design. We introduce a novel 3-D-printed polarizer, which consists of several air and dielectric slabs to transform the polarization of the antenna radiation from linear to circular. The proposed polarizer is placed above a radiating aperture operating at the center frequency of 60 GHz. An electric field, <inline-formula> <tex-math notation="LaTeX">${E}$ </tex-math></inline-formula>, radiated from the aperture generates two components of electric fields, <inline-formula> <tex-math notation="LaTeX">${E} _{\mathrm {x}}$ </tex-math></inline-formula> and <inline-formula> <tex-math notation="LaTeX">${E} _{\mathrm {y}}$ </tex-math></inline-formula>. After passing through the polarizer, both <inline-formula> <tex-math notation="LaTeX">${E} _{\mathrm {x}}$ </tex-math></inline-formula> and <inline-formula> <tex-math notation="LaTeX">${E} _{\mathrm {y}}$ </tex-math></inline-formula> fields can be degenerated with an orthogonal phase difference which results in having a wide axial ratio bandwidth. The phase difference between <inline-formula> <tex-math notation="LaTeX">${E} _{\mathrm {x}}$ </tex-math></inline-formula> and <inline-formula> <tex-math notation="LaTeX">${E} _{\mathrm {y}}$ </tex-math></inline-formula> is determined by the incident angle <inline-formula> <tex-math notation="LaTeX">$\phi $ </tex-math></inline-formula>, of the polarization of the electric field to the polarizer as well as the thickness, <inline-formula> <tex-math notation="LaTeX">${h}$ </tex-math></inline-formula>, of the dielectric slabs. With the help of the thickness of the polarizer, the directivity of the radiation pattern is increased so as to devote high-gain and wideband characteristics to the antenna. To verify our concept, an intensive parametric study and an experiment were carried out. Three antenna sources, including dipole, patch, and aperture antennas, were investigated with the proposed 3-D-printed polarizer. All measured results agree with the theoretical analysis. The proposed antenna with the polarizer achieves a wide impedance bandwidth of 50% from 45 to 75 GHz for the reflection coefficient less than or equal −10 dB, and yields an overlapped axial ratio bandwidth of 30% from 49 to 67 GHz for the axial ratio ≤ 3 dB. The maximum gain of the antenna reaches to 15 dBic. The proposed methodology of this design can apply to applications related to mmw wireless communication systems. The ultimate goal of this paper is to develop a wideband, high-gain, and low-cost antenna for the mmw frequency band.

[1]  Zhongxiang Shen,et al.  Wideband circular polarizer based on dielectric gratings with periodic parallel strips. , 2015, Optics express.

[2]  Thomas Weller,et al.  Embedded 6 GHz 3D-printed half-wave dipole antenna array , 2017, 2017 IEEE 18th Wireless and Microwave Technology Conference (WAMICON).

[3]  Geonyeong Shin,et al.  Electrically small folded spherical helix antennas using copper strips and 3D printing technology , 2016 .

[4]  T. Monediere,et al.  Global Design of an EBG Antenna and Meander-Line Polarizer for Circular Polarization , 2010, IEEE Antennas and Wireless Propagation Letters.

[5]  Zhongxiang Shen,et al.  A Single-Layer Circular Polarizer Based on Hybrid Meander Line and Loop Configuration , 2015, IEEE Transactions on Antennas and Propagation.

[6]  Raymond C. Rumpf,et al.  3-D Printed All-Dielectric Frequency Selective Surface With Large Bandwidth and Field of View , 2015, IEEE Transactions on Antennas and Propagation.

[7]  Tian-ling Zhang,et al.  A Ka Dual-Band Circular Waveguide Polarizer , 2006, 2006 7th International Symposium on Antennas, Propagation & EM Theory.

[8]  Xianming Qing,et al.  140-GHz ${\rm TE}_{20}$-Mode Dielectric-Loaded SIW Slot Antenna Array in LTCC , 2013, IEEE Transactions on Antennas and Propagation.

[9]  Yong Fan,et al.  Millimeter-Wave Wideband High-Efficiency Circularly Polarized Planar Array Antenna , 2016, IEEE Transactions on Antennas and Propagation.

[10]  Kenichi Iga,et al.  A Novel Birefringent Distributed Bragg Reflector Using a Metal/Dielectric Polarizer for Polarization Control of Surface-Emitting Lasers , 1994 .

[11]  H. Kirschbaum,et al.  A Method of Producing Broad-Band Circular Polarization Employing an Anisotropic Dielectric , 1957 .

[12]  Kwok Wa Leung,et al.  Wideband Circularly Polarized Dielectric Bird-Nest Antenna With Conical Radiation Pattern , 2013, IEEE Transactions on Antennas and Propagation.

[13]  David J. Edwards,et al.  Millimetre Wave Antennas for Gigabit Wireless Communications , 2008 .

[14]  J. Chieh,et al.  Development of a Ku-Band Corrugated Conical Horn Using 3-D Print Technology , 2014, IEEE Antennas and Wireless Propagation Letters.

[15]  Manos M. Tentzeris,et al.  Inkjet Printing of Multilayer Millimeter-Wave Yagi-Uda Antennas on Flexible Substrates , 2016, IEEE Antennas and Wireless Propagation Letters.

[16]  Benito Sanz-Izquierdo,et al.  3-D Printing of Elements in Frequency Selective Arrays , 2014, IEEE Transactions on Antennas and Propagation.

[17]  Chih-Hung Chien,et al.  A circular polarizer designed with a dielectric septum loading , 2004, IEEE Transactions on Microwave Theory and Techniques.

[18]  Lotfollah Shafai,et al.  Printable Planar Dielectric Antennas , 2016, IEEE Transactions on Antennas and Propagation.

[19]  Atef Z. Elsherbeni,et al.  3D Printed Dielectric Reflectarrays: Low-Cost High-Gain Antennas at Sub-Millimeter Waves , 2014, IEEE Transactions on Antennas and Propagation.

[20]  Zuojuan Du,et al.  Analysis and Design of Multilayered Broadband Radar Absorbing Metamaterial Using the 3-D Printing Technology-Based Method , 2017, IEEE Antennas and Wireless Propagation Letters.

[21]  R. Rumpf,et al.  Effects of extreme surface roughness on 3D printed horn antenna , 2013 .

[22]  Wenyu Zhao,et al.  All-dielectric circular polarizer with nearly unit transmission efficiency based on cascaded tensor Huygens surface. , 2016, Optics express.

[23]  Gregory Peter Le Sage,et al.  3D Printed Waveguide Slot Array Antennas , 2016, IEEE Access.

[24]  C. Chan,et al.  3-D Printed Millimeter-Wave and Terahertz Lenses with Fixed and Frequency Scanned Beam , 2016, IEEE Transactions on Antennas and Propagation.

[25]  Long Li,et al.  Novel Polarization-Reconfigurable Converter Based on Multilayer Frequency-Selective Surfaces , 2015, Proceedings of the IEEE.

[26]  Yingzeng Yin,et al.  MULTIFUNCTIONAL MEANDER LINE POLARIZER , 2009 .

[27]  R. Wicker,et al.  3-D Printed Microwave Patch Antenna via Fused Deposition Method and Ultrasonic Wire Mesh Embedding Technique , 2015, IEEE Antennas and Wireless Propagation Letters.

[28]  M. Joyal,et al.  Analysis and Design of Thin Circular Polarizers Based on Meander Lines , 2012, IEEE Transactions on Antennas and Propagation.