Synthesis and characterization of agarose–bacterial cellulose biodegradable composites

Agarose is an abundant and biodegradable polymer with strength comparable or higher than other commonly used natural polymers. Agarose can be used for wound dressing and tissue engineering applications. Excessive water uptake and moderate strength limit its applicability for various applications. The objective of this study was to enhance its strength by reinforcing with bacterial cellulose. The addition of bacterial cellulose exhibited remarkable enhancement of 140% in the tensile strength of agarose bioplastic. The strength increased from 25.1 MPa for agarose bioplastic to a maximum of 60.2 MPa for 20% (w/w) of bacterial cellulose. There was a decrease in the amount of water absorption; at 37 °C, the composite films absorbed 450% of their own weight of water, as against 700% absorption by un-reinforced bioplastic films at the same temperature. Thermogravimetric analysis did not reveal any perceivable change in the thermal stability of the bioplastic. Biodegradability of composite films was also established.

[1]  V. Rodgers,et al.  In vivo biocompatibility evaluation of Cibacron blue-agarose. , 1999, Journal of biomedical materials research.

[2]  M. Akashi,et al.  Osteoconductive and hemostatic properties of apatite formed on/in agarose gel as a bone-grafting material. , 2003, Journal of biomedical materials research. Part B, Applied biomaterials.

[3]  David Kumar,et al.  Crosslinking of agarose bioplastic using citric acid. , 2016, Carbohydrate polymers.

[4]  Cemil Alkan,et al.  Biodegradable PEG/cellulose, PEG/agarose and PEG/chitosan blends as shape stabilized phase change materials for latent heat energy storage , 2011 .

[5]  Véronique Favier,et al.  Nanocomposite materials from latex and cellulose whiskers , 1995 .

[6]  W. Wan,et al.  Measurement of the elastic modulus of single bacterial cellulose fibers using atomic force microscopy. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[7]  P. Pavasant,et al.  Structural modification and characterization of bacterial cellulose-alginate composite scaffolds for tissue engineering. , 2015, Carbohydrate polymers.

[8]  Wei Zhang,et al.  IR study on hydrogen bonding in epoxy resin–silica nanocomposites , 2008 .

[9]  Chularat Krongtaew,et al.  Starch/Cellulose Biocomposites Prepared by High-Shear Homogenization/Compression Molding , 2012 .

[10]  A. Mohanty,et al.  The Effect of Mold Temperature on the Performance of Injection Molded Poly(lactic acid)‐Based Bioplastic , 2013 .

[11]  C. Richardson,et al.  Cellulose biosynthesis in Acetobacter xylinum: visualization of the site of synthesis and direct measurement of the in vivo process. , 1976, Proceedings of the National Academy of Sciences of the United States of America.

[12]  A. Dufresne,et al.  Cellulose whiskers reinforced polyvinyl alcohol copolymers nanocomposites , 2008 .

[13]  Y. Wan,et al.  Preparation and characterization of three-dimensional nanostructured macroporous bacterial cellulose/agarose scaffold for tissue engineering , 2011 .

[14]  T. Webster,et al.  Preparation and characterization of biodegradable nano hydroxyapatite–bacterial cellulose composites with well-defined honeycomb pore arrays for bone tissue engineering applications , 2016, Cellulose.

[15]  D W Hutmacher,et al.  An introduction to biodegradable materials for tissue engineering applications. , 2001, Annals of the Academy of Medicine, Singapore.

[16]  W. Bergthaller,et al.  Processing and characterization of biodegradable products based on starch , 1998 .

[17]  E. O. Castrejón-González,et al.  Study of the Molecular Interactions between Functionalized Carbon Nanotubes and Chitosan , 2016 .

[18]  M. Vallet‐Regí,et al.  Hydroxyapatite/β-tricalcium phosphate/agarose macroporous scaffolds for bone tissue engineering , 2008 .

[19]  D. Danon,et al.  SYNTHESIS OF CELLULOSE BY ACETOBACTER XYLINUM V. Ultrastructure of Polymer , 1962 .

[20]  Liang Hong,et al.  Synthesis and characterization of hydroxyapatite–bacterial cellulose nanocomposites , 2006 .

[21]  R. K. Nagarale,et al.  Synergistic effect of cellulose nanowhiskers reinforcement and dicarboxylic acids crosslinking towards polyvinyl alcohol properties , 2016 .

[22]  J. Rhim,et al.  Isolation of cellulose nanocrystals from onion skin and their utilization for the preparation of agar-based bio-nanocomposites films , 2015, Cellulose.

[23]  Hui-Huang Chen,et al.  Physical properties of bacterial cellulose composites for wound dressings , 2016 .

[24]  Qinglin Wu,et al.  Cellulose Nanoparticles: Structure–Morphology–Rheology Relationships , 2015 .

[25]  N. Reddy,et al.  Citric acid cross-linking of starch films , 2010 .

[26]  M. Gabr,et al.  A study on mechanical properties of bacterial cellulose/epoxy reinforced by plain woven carbon fiber modified with liquid rubber , 2010 .

[27]  F. G. Sampedro,et al.  Biocompatibility of Agarose Gel as a Dermal Filler: Histologic Evaluation of Subcutaneous Implants , 2007, Plastic and reconstructive surgery.

[28]  Wanjun Liu,et al.  Injection Molded Biocomposites from Soy Protein Based Bioplastic and Short Industrial Hemp Fiber , 2005 .

[29]  Xin Ge,et al.  Synthesis and characterization of microcrystalline cellulose‐graft‐poly(methyl methacrylate) copolymers and their application as rubber reinforcements , 2015 .

[30]  Karen L. Smith,et al.  Bioactive Agarose Carbon-Nanotube Composites are Capable of Manipulating Brain-Implant Interface. , 2014, Journal of applied polymer science.

[31]  Stephen J. Eichhorn,et al.  An estimation of the Young’s modulus of bacterial cellulose filaments , 2008 .

[32]  Ryan Mills,et al.  Adhesion and Surface Issues in Cellulose and Nanocellulose , 2008 .

[33]  M. Misra,et al.  Biodegradable Green Composites from Distiller's Dried Grains with Solubles (DDGS) and a Polyhydroxy(butyrate-co-valerate) (PHBV)-Based Bioplastic , 2011 .

[34]  B. Hinterstoisser,et al.  Sugar beet cellulose nanofibril-reinforced composites , 2007 .

[35]  Y. Mai,et al.  Reinforcement of polyether polyurethane with dopamine-modified clay: the role of interfacial hydrogen bonding. , 2012, ACS applied materials & interfaces.

[36]  Shiv Shankar,et al.  Preparation of nanocellulose from micro-crystalline cellulose: The effect on the performance and properties of agar-based composite films. , 2016, Carbohydrate polymers.

[37]  Sun-Young Lee,et al.  Nanocellulose reinforced PVA composite films: Effects of acid treatment and filler loading , 2009 .

[38]  Qiang Liu,et al.  Characterization of extruded film based on thermoplastic potato flour , 2012 .

[39]  M. Schramm,et al.  Synthesis of cellulose by Acetobacter xylinum. II. Preparation of freeze-dried cells capable of polymerizing glucose to cellulose. , 1954, The Biochemical journal.

[40]  C. Gallegos,et al.  Development of highly-transparent protein/starch-based bioplastics. , 2010, Bioresource technology.

[41]  A. Mohanty,et al.  Wood fiber reinforced bacterial bioplastic composites: Fabrication and performance evaluation , 2007 .

[42]  J. Laurindo,et al.  Biodegradable films based on rice starch and rice flour , 2010 .

[43]  Hiroyuki Yano,et al.  Optically Transparent Composites Reinforced with Networks of Bacterial Nanofibers , 2005 .

[44]  M. Sutton,et al.  Structural and mechanical characterization of nanoclay-reinforced agarose nanocomposites , 2005, Nanotechnology.

[45]  Vivek Verma,et al.  Agarose bioplastic‐based drug delivery system for surgical and wound dressings , 2017, Engineering in life sciences.

[46]  C. Gaillard,et al.  Rheological study of reinforcement of agarose hydrogels by cellulose nanowhiskers. , 2015, Carbohydrate polymers.

[47]  Xuxu Bao,et al.  Novel agarose and agar fibers: Fabrication and characterization , 2010 .

[48]  A. Hotta,et al.  Structural and mechanical properties of cellulose composites made of isolated cellulose nanofibers and poly(vinyl alcohol) , 2015 .

[49]  D. Weibel,et al.  Agarose particle-templated porous bacterial cellulose and its application in cartilage growth in vitro. , 2015, Acta biomaterialia.

[50]  A. Basta,et al.  PRODUCTION AND CHARACTERIZATION OF ECONOMICAL BACTERIAL CELLULOSE , 2008 .

[51]  S. Kumaravel,et al.  Production of Polyhydroxybutyrate (Bioplastic) and its Biodegradation by Pseudomonas Lemoignei and Aspergillus Niger , 2010 .