3D microfabrication by combining microstereolithography and thick resist UV lithography

A new approach for the realization of true 3D polymer structures is presented in this paper. It consists in adding, in a post-processing microstereolithography step, 3D polymer microstructures on top of a micropart patterned by means of planar processes such as thin films, bulk silicon etching or high aspect ratio structuration (LIGA, RIE, thick resist). In this way, some shape limitations of the planar technologies can be overcome for new functional applications. Moreover, the direct processing of microstereolithography on predefined structures eliminates manipulations which are associated with micro-assembly of separated parts. To demonstrate this combination of microstructuration processes, an example showing a conical axle added by microstereolithography on a SU-8 piece of gearing is presented.

[1]  S. Zissi,et al.  Stereolithography and microtechniques , 1996 .

[2]  Takeshi Nakamoto,et al.  Manufacturing of three-dimensional micro-parts by UV laser induced polymerization , 1996 .

[3]  S. Kawata,et al.  Three-dimensional microfabrication with two-photon-absorbed photopolymerization. , 1997, Optics letters.

[4]  Peter Vettiger,et al.  High-aspect-ratio, ultrathick, negative-tone near-UV photoresist and its applications for MEMS , 1998 .

[5]  Koji Ikuta,et al.  New micro stereo lithography for freely movable 3D micro structure-super IH process with submicron resolution , 1998, Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No.98CH36176.

[6]  S. Zissi,et al.  Microstereophotolithography using a liquid crystal display as dynamic mask-generator , 1997 .

[7]  P. Vettiger,et al.  High-aspect-ratio, ultrathick, negative-tone near-uv photoresist for MEMS applications , 1997, Proceedings IEEE The Tenth Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots.

[8]  A. Bourjault,et al.  Design and control of compliant microrobots , 1996, Proceedings 1996 IEEE Conference on Emerging Technologies and Factory Automation. ETFA '96.

[9]  J. Y. Jézéquel,et al.  Study of the spatial resolution of a new 3D microfabrication process: the microstereophotolithography using a dynamic mask-generator technique , 1997 .

[10]  Naomasa Nakajima,et al.  Photoforming Applied to Fine Forming , 1995 .

[11]  J. Andre,et al.  Industrial photochemistry XXIV. Relations between light flux and polymerized depth in laser stereophotolithography , 1997 .

[12]  K. Ikuta,et al.  Three dimensional micro integrated fluid systems (MIFS) fabricated by stereo lithography , 1994, Proceedings IEEE Micro Electro Mechanical Systems An Investigation of Micro Structures, Sensors, Actuators, Machines and Robotic Systems.