Rational depth of diagnosis of operating injury of engines of agricultural machines

The analysis is based on data that were timed during the operation and repair of diesel engines of agricultural machines and, in particular, engineering monitoring about the most frequent characteristic failures of parts and elements of power energy institutions, as well as about possible causes of the course and development of typical inequalities. The typical causes of failures of elements of diesel power plants, which can be different, have been determined. First, the specific design features of a particular type of engine, which may be uncharacteristic for other typical diesel engines and must be eliminated by appropriate changes to the diesel engine design. Second, improper operation of the diesel engine, such as misapplication, inadequacy of grade fuel and oil refueling design failure. Thirdly, sudden failures for the use in the manufacture of a diesel engine of some materials, defective parts, as well as significant violations of installation and adjustment technologies. In order to prevent failures, choosing the above reasons, it is necessary to correct design flaws, improve technical control, follow the operating instructions, as well as carry out organizational diagnostic measures. In this article, attention is paid to malfunctions and defects, the development of which is caused by natural processes of equipment degradation under load, ensuring the working processes of the diesel engine and its systems, as well as additional accelerating factors, such as contamination of the coolant, oil, fuel, an increase in backlash and clearances, enough values for long-term operation of diesel power plants of agricultural machines of various types.

[1]  L. Titova,et al.  Determining the regions of stability in the motion regimes and parameters of vibratory machines for different technological purposes , 2020, Eastern-European Journal of Enterprise Technologies.

[2]  Vladimir Astashev,et al.  The effectiveness of vibration machines , 2017 .

[3]  J. Mašek,et al.  Evaluation of combine harvester operation costs in different working conditions , 2017 .

[4]  Dagmar Janáčová,et al.  Simulation of the PIR detector active function , 2016 .

[5]  Aivars Aboltins,et al.  Mathematical knowledge in elementary school and for future engineers , 2018 .

[6]  Francesco Marinello,et al.  Last generation instrument for agriculture multispectral data collection , 2017 .

[7]  V. Aulin,et al.  Development of a System for Determining the Informativeness of the Diagnosing Parameters for a Cylinderpiston Group in the Diesel Engine during Operation , 2020, Eastern-European Journal of Enterprise Technologies.

[8]  Andrey V. Sukhanov,et al.  Intelligent Control Systems for Dynamic Mixing Processes in Seed Processing Machines with Highly Elastic Working Bodie , 2020 .

[9]  Ajit K. Srivastava,et al.  Engineering Principles of Agricultural Machines , 1993 .

[10]  S. Ebeid,et al.  Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques , 2016 .

[11]  V A Sokolova,et al.  Modeling the weightof criteria for determining the technical level of agricultural machines , 2021 .

[12]  Wim Desmet,et al.  Vibro-acoustic analysis procedures for the evaluation of the sound insulation characteristics of agricultural machinery cabins , 2000 .

[13]  Lizhang Xu,et al.  Development of rapeseed cleaning loss monitoring system and experiments in a combine harvester , 2019, Biosystems Engineering.