Multi-Material Printed Wind-Tunnel Flutter Model

Flying-wing aircraft, typified by the X-56A, experience flutter due to both an instability inherent to tailless configurations and the necessity for aerodynamically efficient high-aspect-ratio wing...

[1]  Edward Burnett,et al.  Conceptual Design of a Multi-utility Aeroelastic Demonstrator , 2010 .

[2]  Haiyan Hu,et al.  Wind-Tunnel Tests for Active Flutter Control and Closed-Loop Flutter Identification , 2016 .

[3]  Eli Livne Active Flutter Suppression: State of the Art and Technology Maturation Needs , 2017 .

[4]  Chan-Gi Pak,et al.  Creating a Test-Validated Finite-Element Model of the X-56A Aircraft Structure , 2015 .

[5]  Chiara Daraio,et al.  Wave propagation in granular chains with local resonances. , 2015, Physical review. E, Statistical, nonlinear, and soft matter physics.

[6]  John J. Burken,et al.  Current and Future Research in Active Control of Lightweight, Flexible Structures Using the X-56 Aircraft , 2014 .

[7]  W. H. Reed,et al.  Historical Development of Aircraft Flutter , 1981 .

[8]  Zhihan Zhang,et al.  Effect of Rotation Speed to Welding Speed Ratio on Microstructure and Mechanical Behavior of Friction Stir Welded Aluminum–Lithium Alloy Joints , 2013 .

[9]  Kenneth K. Kuo,et al.  Test of Hybrid Rocket Fuel Grains with Swirl Patterns Fabricated Using Rapid Prototyping Technology , 2013 .

[10]  Alexander M. Pankonien,et al.  3D-Printed Wind Tunnel Flutter Model , 2017 .

[11]  Antonio De La Garza,et al.  GLA and Flutter Suppression for a SensorCraft Class Concept Using System Identification , 2008 .

[12]  Shiwei Zhou,et al.  Inertia Effect on Buckling-Induced Auxetic Metamaterials , 2015 .

[13]  Bożena Kaczmarska,et al.  An Analysis Of Tensile Test Results to Assess the Innovation Risk for an Additive Manufacturing Technology , 2015 .

[14]  Tim Lee,et al.  Active Trailing-Edge Flap Control of Oscillating-Wing Tip Vortex , 2006 .

[15]  M. Boyce,et al.  Tunability and enhancement of mechanical behavior with additively manufactured bio-inspired hierarchical suture interfaces , 2014 .

[16]  Jing Li,et al.  Bifurcation Behavior of Airfoil Undergoing Stall Flutter Oscillations in Low-Speed Wind Tunnel , 2009 .

[17]  Eric Y. Reichenbach,et al.  Joined Wing Sensorcraft Aeroservoelastic Wind Tunnel Test Program , 2011 .

[18]  Jonathan D. Bartley-Cho,et al.  Design and Analysis of HiLDA/AEI Aeroelastic Wind Tunnel Model , 2008 .

[19]  C. L. Lee An Iterative Procedure for Nonlinear Flutter Analysis , 1986 .

[20]  Earl H. Dowell,et al.  Nonlinear Aeroelastic Study for Folding Wing Structures , 2010 .

[21]  Earl H. Dowell,et al.  LIMIT CYCLE OSCILLATIONS OF DELTA WING MODELS IN LOW SUBSONIC FLOW , 1999 .

[22]  Peter Dunn,et al.  Nonlinear Stall Flutter and Divergence Analysis of Cantilevered Graphite/Epoxy Wings , 1990 .

[23]  T. A. Weisshaar,et al.  Flutter of Asymmetrically Swept Wings , 1976 .

[24]  Yuji Matsuzaki,et al.  Flutter-Boundary Prediction of a Morphing Wing in the Process of Adaptation , 2012 .

[25]  Thomas Andrianne,et al.  Flutter and Stall Flutter of a Rectangular Wing in a Wind Tunnel , 2011 .

[26]  Earl H. Dowell,et al.  Aeroelastic Response Induced by Free Play, Part 2: Theoretical/Experimental Correlation Analysis , 2011 .

[27]  Kristina Shea,et al.  Mechanical properties of parts fabricated with inkjet 3D printing through efficient experimental design , 2015 .

[28]  M. Raffel,et al.  Experimental and numerical investigations of dynamic stall on a pitching airfoil , 1996 .

[29]  Sergio Ricci,et al.  Active Aeroelastic Control Over a Multisurface Wing: Modeling and Wind-Tunnel Testing , 2007 .

[30]  Rupp Carriveau,et al.  3D printed wind turbines part 1: Design considerations and rapid manufacture potential , 2015 .

[31]  Sergio Ricci,et al.  Design, Manufacturing and Wind Tunnel Test of a Morphing Wing Based on Compliant Structures , 2016 .

[32]  Luciano Demasi,et al.  Dynamic Aeroelasticity of Structurally Nonlinear Configurations Using Linear Modally Reduced Aerodynamic Generalized Forces , 2007 .

[33]  X. Huang,et al.  Active Control of Aerofoil Flutter , 1987 .

[34]  Sunil C. Joshi,et al.  3D printing in aerospace and its long-term sustainability , 2015 .