Mechanical properties and intermetallic compound formation at the Sn/Ni and Sn-0.7wt.%Cu/Ni joints

[1]  Sinn-wen Chen,et al.  Interfacial reactions in the Sn-(Cu)/Ni, Sn-(Ni)/Cu, and Sn/(Cu,Ni) systems , 2003 .

[2]  S. Wang,et al.  Prevention of spalling by the self-formed reaction barrier layer on controlled collapse chip connections under bump metallization , 2003 .

[3]  Hwa-Teng Lee,et al.  Influence of intermetallic compounds on the adhesive strength of solder joints , 2002 .

[4]  Mingliang L. Huang,et al.  Creep behavior of eutectic Sn-Cu lead-free solder alloy , 2002 .

[5]  Sinn-wen Chen,et al.  Interfacial reactions in In-Sn/Ni couples and phase equilibria of the In-Sn-Ni system , 2002 .

[6]  Jennie S. Hwang,et al.  A high‐performance lead‐free solder – the effects of In on 99.3Sn/0.7Cu , 2001 .

[7]  Katsuaki Suganuma,et al.  Effect of Ag Addition on the Microstructural and Mechanical Properties of Sn-Cu Eutectic Solder , 2001 .

[8]  D. R. Frear,et al.  Morphology of interfacial reaction between lead-free solders and electroless Ni–P under bump metallization , 2000 .

[9]  S. Peters,et al.  An analysis of the current status of lead-free soldering. , 1999 .

[10]  Sinn-wen Chen,et al.  Interfacial reactions in molten Sn/Cu and molten In/Cu couples , 1997 .

[11]  W. J. Plumbridge,et al.  Solders in electronics , 1996, Journal of Materials Science.

[12]  J. Glazer.  Metallurgy of low temperature Pb-free solders for electronic assembly , 1995 .

[13]  D. R. Frear,et al.  Solder mechanics : a state of the art assessment , 1991 .

[14]  J. W. Morris,et al.  Tensile behavior of pb-sn solder/cu joints , 1987 .

[15]  D. E. Gray,et al.  American Institute of Physics Handbook , 1957 .