CFD (computational fluid dynamics)-based optimal design of a micro-reformer by integrating computational a fluid dynamics code using a simplified conjugate-gradient method

This study is focused on computation optimization of the geometry for the flow channels in a micro-reformer used for methanol steam reforming. Three-dimensional mass and momentum transport phenomena with a pure fluid simulation in a micro-reformer are predicted using a commercial computational fluid dynamics code. Meanwhile, a simplified conjugate-gradient method is adopted to seek the optimal manifold shape and channel width of the micro-reformer iteratively using a Python interface. In the present study, the geometrical optimization tasks involve the designs of the inlet manifold and outlet manifold shapes as well as channel width distribution, and the design purpose is to obtain a uniform flow distribution throughout the entire micro-reformer so as to increase the hydrogen gas production rate. Cubic-spline interpolation is used in shape design to fit the points on the manifold shape more smoothly. The results show that the velocity standard deviation decreased from 0.14 to 0.048 and 0.051 after searching the optimal manifold shapes and channel widths, respectively. The manifold shapes of the inlet and outlet as well as the channel widths can efficiently lead to significant uniformity in the flow fields using a simplified conjugate-gradient method.

[1]  Manfred J. Hampe,et al.  Designing and constructing microplants , 2000 .

[2]  Wei-Mon Yan,et al.  Transport phenomena and performance of a plate methanol steam micro-reformer with serpentine flow field design , 2010 .

[3]  Haim H. Bau,et al.  Optimization of conduits' shape in micro heat exchangers , 1998 .

[4]  Shuichi Shoji,et al.  Fluids for Sensor Systems , 1998 .

[5]  Dang Saebea,et al.  Use of different renewable fuels in a steam reformer integrated into a solid oxide fuel cell: Theoretical analysis and performance comparison , 2013 .

[6]  Jin-Woo Choi,et al.  3-D Microfluidic Networks for Combinatorial Chemistry , 2002 .

[7]  Quan Yuan,et al.  CO selective oxidation in a microchannel reactor for PEM fuel cell , 2004 .

[8]  Feng Wang,et al.  Experiment of catalyst activity distribution effect on methanol steam reforming performance in the packed bed plate-type reactor , 2013 .

[9]  Falin Chen,et al.  Analysis of a Plate-Type Microreformer for Methanol Steam Reforming Reaction , 2009 .

[10]  Yong Tang,et al.  Fabrication and characteristics of cube-post microreactors for methanol steam reforming , 2012 .

[11]  C Gärtner,et al.  Polymer microfabrication methods for microfluidic analytical applications , 2000, Electrophoresis.

[12]  Akira Igarashi,et al.  A miniaturized methanol reformer with Si-based microreactor for a small PEMFC , 2006 .

[13]  K. K. Ghosh,et al.  A phosphoric acid fuel cell coupled with biogas , 1988 .

[14]  Jing Sun,et al.  Modeling and dynamics of an autothermal JP5 fuel reformer for marine fuel cell applications , 2008 .

[15]  H. Becker,et al.  Polymer microfluidic devices. , 2002, Talanta.

[16]  Wolfgang Ehrfeld,et al.  State-of-the-art in microreaction technology : concepts, manufacturing and applications , 1999 .

[17]  K. Jensen.  Microreaction engineering * is small better? , 2001 .

[18]  Masayoshi Esashi,et al.  MEMS-based components of a miniature fuel cell/fuel reformer system , 2004 .

[19]  Evan O. Jones,et al.  High efficiency and low carbon monoxide micro-scale methanol processors , 2004 .

[20]  Masatoshi Nomura,et al.  Development of multi-layered microreactor with methanol reformer for small PEMFC , 2005 .

[21]  Masaru Noda,et al.  CFD-based optimal design of manifold in plate-fin microdevices , 2004 .

[22]  Abdul-Ghani Olabi,et al.  Design of experiment study of the parameters that affect performance of three flow plate configurations of a proton exchange membrane fuel cell , 2010 .

[23]  Longsheng Lu,et al.  Optimal design of complex manifold geometries for uniform flow distribution between microchannels , 2008 .

[24]  U. Larsen,et al.  Modular concept of a laboratory on a chip for chemical and biochemical analysis , 1998 .

[25]  T. Zech,et al.  Microreaction technology : Potentials and technical feasibility , 1998 .

[26]  W. Ko.  Packaging of microfabricated devices and systems , 1995 .

[27]  W. Yan,et al.  Numerical study on micro-reformer performance and local transport phenomena of the plate methanol steam micro-reformer , 2009 .

[28]  D. Himmelblau,et al.  Optimization of Chemical Processes , 1987 .

[29]  Chin-Hsiang Cheng,et al.  A SIMPLIFIED CONJUGATE-GRADIENT METHOD FOR SHAPE IDENTIFICATION BASED ON THERMAL DATA , 2003 .

[30]  W. Ehrfeld,et al.  Microreactors for Chemical Synthesis and Biotechnology - Current Developments and Future Applications , 1998 .

[31]  J. Chung,et al.  Experimental study on the performance of hydrogen production from miniature methanol–steam reformer integrated with Swiss-roll type combustor for PEMFC , 2013 .

[32]  S. Lakshminarayanan,et al.  Improved Design of Microchannel Plate Geometry for Uniform Flow Distribution , 2008 .