Spheres on pillars: Nanobubbling based on attogram mass delivery from metal-filled nanotubes

We report an experimental investigation into the controlled fabrication of metallic nanospheres on the tip of nanotubes. The fabrication process, nanobubbling, is based on nanofluidic mass delivery at the attogram scale using metal-filled carbon nanotubes (CNTs). Two methods have been investigated including electron-beam-induced bubbling (EBIB) and electromigration-based bubbling (EMBB). Under the irradiation of a high energy electron beam of a transmission electron microscope (TEM), the encapsulated metal is melted and extruded out from the tip of the nanotube; generating a metallic sphere. Our investigation showed that several factors including temperatures, nanotube tip breaking/opening, and electron-beam-induced reconstruction of the carbon shells are responsible to the sizes and shapes of the metallic spheres on the nanotubes. In the case that the encapsulated materials inside the CNT has a higher melting point than that of the beam energy can reach, electromigration-based mass delivery is an optional process to apply. Results show that under a low bias (2–2.5V), spherical nanoparticles can be formed on the tips of nanotubes. EMBB is a further development of the nanorobotic spot welding technique and a fundamental technology for thermal dip pen nanolithography. The sphere-on-pillar structures and the nanobubbling processes proposed will enable devices such as nanooptical antennas, scanning near-field optical microscope (SNOM) probes, scanning anodes for field emitters, and single molecule detectors, which can find applications in bio-sensing, molecular detection, and high-resolution optical microscopy.

[1]  Li Zhang,et al.  Nanorobotic spot welding: controlled metal deposition with attogram precision from copper-filled carbon nanotubes. , 2007, Nano letters.

[2]  X. Tao,et al.  Nanotube Boiler: Attogram Copper Evaporation Driven by Electric Current, Joule Heating, Charge, and Ionization , 2009, IEEE Transactions on Nanotechnology.

[3]  Yury Gogotsi,et al.  In situ multiphase fluid experiments in hydrothermal carbon nanotubes , 2001 .

[4]  L. Novotný,et al.  Enhancement and quenching of single-molecule fluorescence. , 2006, Physical review letters.

[5]  Erwin Frey,et al.  Thermal fluctuations of grafted microtubules provide evidence of a length-dependent persistence length , 2005, Proceedings of the National Academy of Sciences.

[6]  O. Martin,et al.  Resonant Optical Antennas , 2005, Science.

[7]  X. Tao,et al.  Plumbing the Depths of the Nanometer Scale , 2010, IEEE Nanotechnology Magazine.

[8]  Lukas Novotny.  Nano-optics: Optical antennas tuned to pitch , 2008, Nature.

[9]  I. Yamaguchi,et al.  Photocatalytic deposition of a gold nanoparticle onto the top of a SiN cantilever tip , 2001, Journal of microscopy.

[10]  V. Sandoghdar,et al.  A single gold particle as a probe for apertureless scanning near‐field optical microscopy , 2001, Journal of microscopy.

[11]  T. D. Yuzvinsky,et al.  Nanoscale reversible mass transport for archival memory. , 2009, Nano letters.

[12]  Patrik Hoffmann,et al.  Improved tip performance for scanning near-field optical microscopy by the attachment of a single gold nanoparticle , 2000 .

[13]  Dmitri Golberg,et al.  Copper‐Filled Carbon Nanotubes: Rheostatlike Behavior and Femtogram Copper Mass Transport , 2007 .

[14]  Takeshi Yokota,et al.  In situ transmission-electron-microscopy investigation of melting in submicron Al-Si alloy particles under electron-beam irradiation. , 2003, Physical review letters.

[15]  Antoine Ferreira,et al.  Nanotube fluidic junctions: internanotube attogram mass transport through walls. , 2009, Nano letters.

[16]  F. Banhart,et al.  Irradiation effects in carbon nanostructures , 1999 .

[17]  Yoshio Bando,et al.  Carbon nanothermometer containing gallium , 2002, Nature.

[18]  Shengming Zhou,et al.  Thermal CVD synthesis of carbon nanotubes filled with single-crystalline Cu nanoneedles at tips , 2006 .

[19]  K. Higashitani,et al.  Single-nanoparticle-terminated tips for scanning probe microscopy. , 2006, Langmuir.

[20]  Yang Gan.  A review of techniques for attaching micro- and nanoparticles to a probe's tip for surface force and near-field optical measurements (Invited review article) , 2007 .

[21]  P. Ajayan,et al.  Carbon Nanotubes as High-Pressure Cylinders and Nanoextruders , 2006, Science.

[22]  X. Tao,et al.  Controllable melting and flow of β-Sn in flexible amorphous carbon nanotubes , 2009 .

[23]  Y. Gan.  Invited review article: a review of techniques for attaching micro- and nanoparticles to a probe's tip for surface force and near-field optical measurements. , 2007, The Review of scientific instruments.

[24]  T. Kamimura,et al.  n-Type Doping for Single-Walled Carbon Nanotubes by Oxygen Ion Implantation with 25 eV Ultralow-Energy Ion Beam , 2005 .

[25]  M. Monthioux,et al.  Encapsulated C60 in carbon nanotubes , 1998, Nature.

[26]  Fumihito Arai,et al.  Electron-beam-induced deposition with carbon nanotube emitters , 2002 .

[27]  Zhong Lin Wang,et al.  Converting Ceria Polyhedral Nanoparticles into Single-Crystal Nanospheres , 2006, Science.

[28]  P. Ajayan,et al.  Carbon onions as nanoscopic pressure cells for diamond formation , 1996, Nature.

[29]  Petr Král,et al.  Laser-Driven Atomic Pump , 1999 .

[30]  F. Iwata,et al.  The use of capillary force for fabricating probe tips for scattering-type near-field scanning optical microscopes , 2003 .

[31]  Kazuhiro Kanda,et al.  Evaluation of Field Electron Emitter Fabricated Using Focused-Ion-Beam Chemical Vapor Deposition , 2006 .

[32]  Y. Li,et al.  Real-time observation of liquid Indium unusual behavior inside silica nanotubes , 2005 .