Performance evaluation of SBS modified asphalt mixtures using warm mix technologies

[1]  Patrick G. Lavin,et al.  Asphalt Pavements: A Practical Guide to Design, Production and Maintenance for Engineers and Architects , 2003 .

[2]  Andrew Wimsatt,et al.  A Synthesis of Warm-Mix Asphalt , 2007 .

[3]  Audrius Vaitkus,et al.  ANALYSIS AND EVALUATION OF POSSIBILITIES FOR THE USE OF WARM MIX ASPHALT IN LITHUANIA , 2009 .

[4]  Ulf Isacsson,et al.  Rheological effects of commercial waxes and polyphosphoric acid in bitumen 160/220 : low temperature performance , 2006 .

[5]  Sugandh Rajpal.  Rutting potential of polymer modified hot mix asphalt concrete mixtures , 2005 .

[6]  M Budija,et al.  The development of high performance polymer modified binders for asphalt use with improved fuming characteristics , 1996 .

[7]  Tejash Gandhi,et al.  EFFECTS OF WARM ASPHALT ADDITIVES ON ASPHALT BINDER AND MIXTURE PROPERTIES , 2008 .

[8]  S. Nazarian,et al.  Evaluation of Aging of Hot-Mix Asphalt Using Wave Propagation Techniques , 1995 .

[9]  François Olard,et al.  Low-Energy Asphalt with Performance of Hot-Mix Asphalt , 2006 .

[10]  Daniel C Brown.  Warm Mix: The Lights Are Green , 2008 .

[11]  David E. Newcomb,et al.  The Effect of Voids in Mineral Aggregate (VMA) on Hot-Mix Asphalt Pavements , 1999 .

[12]  L. Loeber,et al.  New direct observations of asphalts and asphalt binders by scanning electron microscopy and atomic force microscopy , 1996 .

[13]  Yvonne Becker,et al.  Polymer modified asphalt , 2001 .

[14]  H. Zubeck,et al.  Workability and Performance of Polymer-modified Asphalt Aggregate Mixtures in Cold Regions , 2003 .

[15]  Barbara Brundage.  Photoshop Elements 6: The Missing Manual , 2007 .

[16]  B Tessier,et al.  Warm Mix Asphalt Paving Technologies: A Road Builder's Perspective , 2008 .

[17]  Joe W Button,et al.  A Review of Warm Mix Asphalt , 2008 .

[18]  Hussain U Bahia,et al.  Evaluation of a warm-mix asphalt additive , 2008 .

[19]  Larry Michael,et al.  Assessing Potential for Warm-Mix Asphalt Technology Adoption , 2007 .

[20]  Chandra Kiran Kumar Akisetty,et al.  Evaluation of warm asphalt additives on performance properties of CRM binders and mixtures , 2008 .

[21]  L A Cooley,et al.  ACCELERATED LABORATORY RUTTING TESTS: EVALUATION OF THE ASPHALT PAVEMENT ANALYZER , 2003 .

[22]  Prithvi S. Kandhal,et al.  Hot Mix Asphalt Materials, Mixture Design and Construction , 1996 .

[23]  Abdalla S. Al-Rawashdeh.  Performance Assessment of Warm Mix Asphalt (WMA) Pavements , 2009 .

[24]  Brian Prowell.  Scan Tour Examines Warm-Mix in Europe , 2007 .

[25]  O. Kristjansdottir,et al.  Warm Mix Asphalt for Cold Weather Paving , 2006 .

[26]  Kwang W. Kim,et al.  Estimation of RAP's binder viscosity using GPC without binder recovery , 2006 .

[27]  Per Redelius,et al.  Rheological effects of waxes in bitumen , 2003 .

[28]  Ron Myers,et al.  HOT MIX ASPHALT PLANTS EMISSION ASSESSMENT REPORT. , 2000 .

[29]  Brian D Prowell,et al.  Field Performance of Warm-Mix Asphalt at National Center for Asphalt Technology Test Track , 2007 .

[30]  Brian D Prowell,et al.  Warm-mix asphalt: European practice: international technology scanning program , 2008 .

[31]  Brian D Prowell,et al.  Evaluation of Sasobit® for Use in Warm Mix Asphalt , 2005 .

[32]  R. Lyman Ott.,et al.  An introduction to statistical methods and data analysis , 1977 .

[33]  Massoud Pirbazari,et al.  Emissions of Volatile and Semi-Volatile Organic Compounds and Particulate Matter from Hot Asphalts , 1997 .

[34]  B G Koenders,et al.  INNOVATIVE PROCESS IN ASPHALT PRODUCTION AND APPLICATION TO OBTAIN LOWER OPERATING TEMPERATURES , 2000 .

[35]  L. Drzal,et al.  Network morphology of straight and polymer modified asphalt cements , 1997, Microscopy research and technique.

[36]  Hamad I. Al-Abdul Wahhab,et al.  PREDICTION OF ASPHALT RHEOLOGICAL PROPERTIES USING HP-GPC , 1999 .

[37]  C A Bell,et al.  Investigation of the Relationship Between Field Performance and Laboratory Aging Properties of Asphalt Mixtures , 1995 .

[38]  Rajib B. Mallick,et al.  Using Warm-Mix Asphalt Technology to Incorporate High Percentage of Reclaimed Asphalt Pavement Material in Asphalt Mixtures , 2008 .

[39]  Mary Stroup-Gardiner,et al.  Asphalt modified by SBS triblock copolymer: Structures and properties , 1996 .

[40]  Reynaldo Roque,et al.  Guidelines for Use of Modified Binders , 2005 .

[41]  Musharraf Zaman,et al.  Effect of Sasobit and Aspha-Min on Wettability and Adhesion between Asphalt Binders and Aggregates , 2008 .

[42]  E R Brown,et al.  HOT MIX ASPHALT MATERIALS, MIXTURE DESIGN AND CONSTRUCTION. SECOND EDITION , 1996 .

[43]  Burak Sengoz,et al.  Analysis of styrene-butadiene-styrene polymer modified bitumen using fluorescent microscopy and conventional test methods. , 2008, Journal of hazardous materials.

[44]  R. Kuehl.  Design of Experiments: Statistical Principles of Research Design and Analysis , 1999 .

[45]  Serji N. Amirkhanian,et al.  Laboratory evaluation of the effects of short-term oven aging on asphalt binders in asphalt mixtures using HP-GPC , 2009 .

[46]  P W Jennings,et al.  THE EXPANDED MONTANA ASPHALT QUALITY STUDY USING HIGH PRESSURE LIQUID CHROMATOGRAPHY. FINAL REPORT , 1985 .

[47]  Rejoinder to "Analysis of variance--why it is more important than ever" by A. Gelman , 2005, math/0508530.

[48]  C. Daranga,et al.  Characterization of aged polymer modified asphalt cements for recycling purposes , 2005 .

[49]  Serji N. Amirkhanian,et al.  Effects of warm mix asphalt additives on performance properties of polymer modified asphalt binders , 2010 .

[50]  P. W. Jennings,et al.  HIGH PRESSURE LIQUID CHROMATOGRAPHY AS A METHOD OF MEASURING ASPHALT COMPOSITION , 1980 .

[51]  S. Caro,et al.  Moisture susceptibility of asphalt mixtures, Part 1: mechanisms , 2008 .

[52]  Dallas N. Little,et al.  Adhesion in Bitumen-Aggregate Systems and Quantification of the Effects of Water on the Adhesive Bond , 2005 .

[53]  Brian D Prowell,et al.  Evaluation of Evotherm® for use in Warm Mix Asphalt , 2006 .

[54]  Jian-Shiuh Chen,et al.  Asphalt modified by styrene-butadiene-styrene triblock copolymer: Morphology and model , 2002 .

[55]  Roman Lackner,et al.  Identification of four material phases in bitumen by atomic force microscopy , 2004 .

[56]  Audrey Copeland,et al.  Moisture Sensitivity of Modified Asphalt Binders , 2007 .

[57]  A. Gelman.  Analysis of variance: Why it is more important than ever? , 2005, math/0504499.

[58]  Musharraf Zaman,et al.  Comparative Laboratory Study of Sasobit and Aspha-Min Additives in Warm-Mix Asphalt , 2007 .

[59]  J. C. Petersen,et al.  Impact of Lime Modification of Asphalt and Freeze–Thaw Cycling on the Asphalt–Aggregate Interaction and Moisture Resistance to Moisture Damage , 2005 .

[60]  Kwang W. Kim,et al.  Methodology for Defining LMS Portion in Asphalt Chromatogram , 1995 .

[61]  John T Harvey,et al.  Warm-Mix Asphalt Study: Test Track Construction and First-Level Analysis of Phase 1 HVS and Laboratory Testing , 2008 .

[62]  Bradley J. Putman,et al.  Laboratory Evaluation of Anti-Strip Additives in Hot Mix Asphalt , 2006 .

[63]  Brian D Prowell,et al.  Evaluation of Aspha-Min® Zeolite for Use in Warm Mix Asphalt , 2005 .

[64]  Rajib B. Mallick,et al.  A laboratory study on CO2 emission from asphalt binder and its reduction with the use of warm mix asphalt , 2009 .