Comparing the Effect of Fuel/Air Interactions in a Modern High-Speed Light-Duty Diesel Engine

[1]  Jacqueline O'Connor,et al.  Post Injections for Soot Reduction in Diesel Engines: A Review of Current Understanding , 2013 .

[2]  R. Reitz,et al.  Turbulence Modeling of Internal Combustion Engines Using RNG κ-ε Models , 1995 .

[3]  Rolf D. Reitz,et al.  Examination of Initialization and Geometric Details on the Results of CFD Simulations of Diesel Engines , 2011 .

[4]  Christopher J. Rutland,et al.  A new droplet collision algorithm , 2000 .

[5]  Samir Raorane,et al.  Analytical and Developmental Techniques Utilized in the Structural Optimization of a New Lightweight Diesel Engine , 2015 .

[6]  Rolf D. Reitz,et al.  A Computational Investigation of Stepped-Bowl Piston Geometry for a Light Duty Engine Operating at Low Load , 2010 .

[7]  Martin Tuner,et al.  Experimental Comparison of Heat Losses in Stepped-Bowl and Re-Entrant Combustion Chambers in a Light Duty Diesel Engine , 2016 .

[8]  Dominik Kuhnke,et al.  Spray / Wall-interaction Modelling by Dimensionless Data Analysis , 2004 .

[9]  R. Reitz,et al.  MODELING SPRAY ATOMIZATION WITH THE KELVIN-HELMHOLTZ/RAYLEIGH-TAYLOR HYBRID MODEL , 1999 .

[10]  Hua Zhao,et al.  In-cylinder Studies of Multiple Diesel Fuel Injection in a Single Cylinder Optical Engine , 2005 .

[11]  Dennis L. Siebers,et al.  Soot in diesel fuel jets: effects of ambient temperature, ambient density, and injection pressure , 2004 .

[12]  Martin Tuner,et al.  Effect of Piston Shape and Swirl Ratio on Engine Heat Transfer in a Light-Duty Diesel Engine , 2014 .

[13]  J Brettschneider,et al.  BERECHNUNG DES LUFTVERHAELTNISSES LAMBDA VON LUFT-KRAFTSTOFF-GEMISCHEN UND DES EINFLUSSES VON MESSFEHLERN AUF LAMBDA , 1979 .

[14]  Rolf D. Reitz,et al.  Effects of Multiple Injections and Flexible Control of Boost and EGR on Emissions and Fuel Consumption of a Heavy-Duty Diesel Engine , 2001 .

[15]  Rolf D. Reitz,et al.  Mechanism of Soot and NOx Emission Reduction Using Multiple-injection in a Diesel Engine , 1996 .

[16]  Paul C. Miles,et al.  The effect of swirl ratio and fuel injection parameters on CO emission and fuel conversion efficiency for high-dilution, low-temperature combustion in an automotive diesel engine. , 2006 .

[17]  A. Benkenida,et al.  The 3-Zones Extended Coherent Flame Model (Ecfm3z) for Computing Premixed/Diffusion Combustion , 2004 .

[18]  R. Reitz,et al.  A temperature wall function formulation for variable-density turbulent flows with application to engine convective heat transfer modeling , 1997 .

[19]  O. Salvat,et al.  Passenger Car Serial Application of a Particulate Filter System on a Common Rail Direct Injection Diesel Engine , 2000 .

[20]  Olivier Colin,et al.  On the use of a tabulation approach to model auto-ignition during flame propagation in SI engines , 2011 .

[21]  Sven B Andersson,et al.  Effects of Multiple Injections on Engine-Out Emission Levels Including Particulate Mass from an HSDI Diesel Engine , 2007 .

[22]  Jong-Young Lee,et al.  Bowl Shape Design Optimization for Engine-Out PM Reduction in Heavy Duty Diesel Engine , 2015 .