Optimization of Hybrid Energy System

The Proposed paper suggested about the step by step optimization of size component of Photovoltaic system/Wind turbine/biomass hybrid renewable energy system (HRES) with battery and converter system but without grid connection with the help of ABC (Artificial Bee Colony) algorithm MATLAB/SIMULINK software. MATLAB script is developed to calculate the optimized design of a system to evaluate the techno-economic and economical possibility of a maximum technology. Paper Proposed to minimize the total Net Present Cost (NPC) of the system while satisfying the unit and system constraints such as number of solar modules, diameter of parabolic reflectors, number of solar collectors, gross area available hub height of wind turbine, rotor diameter of wind blades, scale factor, area of the installation. The simulation result shows that the optimization of different component sizing can reduce the initial cost with the moderate efficiency of the system.

[1]  Rajesh Kumar Nema,et al.  A current and future state of art development of hybrid energy system using wind and PV-solar: A review , 2009 .

[2]  G. C. Seeling-Hochmuth.  A combined optimisation concet for the design and operation strategy of hybrid-PV energy systems , 1997 .

[3]  Dervis Karaboga,et al.  A comparative study of Artificial Bee Colony algorithm , 2009, Appl. Math. Comput..

[4]  G. J. Rios-Moreno,et al.  Optimal sizing of renewable hybrids energy systems: A review of methodologies , 2012 .

[5]  Alok Singh,et al.  An artificial bee colony algorithm for the leaf-constrained minimum spanning tree problem , 2009, Appl. Soft Comput..

[6]  Dervis Karaboga,et al.  A powerful and efficient algorithm for numerical function optimization: artificial bee colony (ABC) algorithm , 2007, J. Glob. Optim..

[7]  R. Srinivasa Rao,et al.  Optimization of Distribution Network Configuration for Loss Reduction Using Artificial Bee Colony Algorithm , 2008 .

[8]  P. Holtberg,et al.  International Energy Outlook 2016 With Projections to 2040 , 2016 .

[9]  Wei Zhou,et al.  Current status of research on optimum sizing of stand-alone hybrid solar–wind power generation systems , 2010 .

[10]  Wei Zhou,et al.  OPTIMAL SIZING METHOD FOR STAND-ALONE HYBRID SOLAR–WIND SYSTEM WITH LPSP TECHNOLOGY BY USING GENETIC ALGORITHM , 2008 .

[11]  Rodolfo Dufo-López,et al.  Design and control strategies of PV-Diesel systems using genetic algorithms , 2005 .

[12]  Consolación Gil,et al.  Optimization methods applied to renewable and sustainable energy: A review , 2011 .

[13]  Ozan Erdinc,et al.  Optimum design of hybrid renewable energy systems: Overview of different approaches , 2012 .

[14]  Dervis Karaboga,et al.  AN IDEA BASED ON HONEY BEE SWARM FOR NUMERICAL OPTIMIZATION , 2005 .