Soft sensing of melt temperature in polymer extrusion

Precise monitoring techniques are invaluable to any process for diagnosing its operational health, safety concerns and also for achieving good process control. In polymer extrusion, it is quite difficult to visually observe the melt inside barrel during the process operation and hence the level of control of the process operational quality is highly dependent upon the process monitoring techniques. Currently, a number of physical sensing devices are widely available in industry for monitoring of parameters such as melt temperature, melt pressure, screw speed and so forth. However, there are some limitations to use physical sensors in process measurements due to several constraints such as their access requirements, disruptive effects on the melt flow, fragility, complexity, etc. Thus, the application of soft sensing techniques should be highly useful for improved process monitoring and hence for advanced process control. In this work, a general discussion is made on the soft sensors and soft sensing applications in polymer extrusion. Then, a soft sensor concept is proposed for the die melt temperature profile prediction in polymer extrusion. The simulation results showed that the proposed technique can predict the temperature profile across the melt flow in real-time with good accuracy. Eventually, the importance of developing of such soft sensing techniques is discussed while providing some of the possible directions for future research.

[1]  Sirish L. Shah,et al.  Application of support vector regression for developing soft sensors for nonlinear processes , 2010 .

[2]  Luigi Fortuna,et al.  Soft Sensors for Monitoring and Control of Industrial Processes (Advances in Industrial Control) , 2006 .

[3]  Marion McAfee,et al.  Real-time measurement of melt viscosity in single-screw extrusion , 2006 .

[4]  Morimasa Ogawa,et al.  Quality inferential control of an industrial high density polyethylene process , 1999 .

[5]  Pierantonio Facco,et al.  Moving average PLS soft sensor for online product quality estimation in an industrial batch polymerization process , 2009 .

[6]  G. Irwin,et al.  Extruder Melt Temperature Control With Fuzzy Logic , 2011 .

[7]  Hiromasa Kaneko,et al.  Development of high predictive soft sensor method and the application to industrial polymer processes , 2012 .

[8]  Peter Martin,et al.  A review and evaluation of melt temperature sensors for polymer extrusion , 2012 .

[9]  Jing Deng,et al.  Modelling the Effects of Operating Conditions on Die Melt Temperature Homogeneity in Single Screw Extrusion , 2010 .

[10]  Jie Zhang,et al.  Prediction of polymer quality in batch polymerisation reactors using robust neural networks , 1998 .

[11]  Xinggao Liu,et al.  Melt index prediction by RBF neural network optimized with an adaptive new ant colony optimization algorithm , 2011 .

[12]  János Abonyi,et al.  Semi-mechanistic Models for State-Estimation - Soft Sensor for Polymer Melt Index Prediction , 2004, ICAISC.

[13]  Luigi Fortuna,et al.  Comparison of Soft-Sensor Design Methods for Industrial Plants Using Small Data Sets , 2009, IEEE Transactions on Instrumentation and Measurement.

[14]  Luiz Augusto da Cruz Meleiro,et al.  ANN-based soft-sensor for real-time process monitoring and control of an industrial polymerization process , 2009, Comput. Chem. Eng..

[15]  Chamil Abeykoon,et al.  A Novel Model-Based Controller for Polymer Extrusion , 2014, IEEE Transactions on Fuzzy Systems.

[16]  Sirish L. Shah,et al.  Inferential sensors for estimation of polymer quality parameters: Industrial application of a PLS-based soft sensor for a LDPE plant , 2006 .

[17]  E. C. Brown,et al.  The effect of screw geometry on melt temperature profile in single screw extrusion , 2006 .

[18]  Chamil Abeykoon,et al.  Monitoring the effect of operating conditions on melt temperature homogeneity in single-screw extrusion , 2010 .

[19]  Bogdan Gabrys,et al.  Data-driven Soft Sensors in the process industry , 2009, Comput. Chem. Eng..

[20]  Xinggao Liu,et al.  Melt index prediction by weighted least squares support vector machines , 2006 .

[21]  Peter Martin,et al.  Monitoring and modelling of the effects of process settings and screw geometry on melt pressure generation in polymer extrusion , 2012 .

[22]  Jing Deng,et al.  A new model based approach for the prediction and optimisation of thermal homogeneity in single screw extrusion , 2011 .

[23]  Jing Deng,et al.  Modelling the Effects of Operating Conditions on Motor Power Consumption in Single Screw Extrusion , 2010, LSMS/ICSEE.

[24]  W. Marsden.  I and J , 2012 .

[25]  A. J. Bur,et al.  Fluorescence based temperature measurements and applications to real-time polymer processing , 2001 .

[26]  Yan Wang,et al.  Study on Measurement of Polymer Orientation Degree Base on SVM , 2011 .

[27]  Peter Martin,et al.  The inferential monitoring of screw load torque to predict process fluctuations in polymer extrusion , 2011 .

[28]  Q. Xue,et al.  The friction and wear properties of nanometer ZrO2-filled polyetheretherketone , 1998 .