Improvements in GeTe-based Phase Change RF Switches

Recent progress in GeTe-based phase-change RF switch technology will be presented. Use of tungsten micro-heat-ers in the inline phase change switch (IPCS) processes has improved device performance and reliability. Finite element simulations of the melt/quench process in GeTe for a thermally activated independent tungsten thin film heating element will be shown. A small (0.33mm × 0.61mm) series-shunt single-pole double-throw (SPDT) switch based on 3rd generation IPCS technology was built and characterized. The SPDT switch exhibited less than 1 dB insertion loss in the DC-65GHz bandwidth. We also report measured data of a wide-band, DC-65GHz, monolithic 4-bit attenuator circuit using IPCS technology.

[1]  Robert M. Young,et al.  A Four-Terminal, Inline, Chalcogenide Phase-Change RF Switch Using an Independent Resistive Heater for Thermal Actuation , 2013, IEEE Electron Device Letters.

[2]  Michael J. Lee,et al.  A 7.3 THz Cut-Off Frequency, Inline, Chalcogenide Phase-Change RF Switch Using an Independent Resistive Heater for Thermal Actuation , 2013, 2013 IEEE Compound Semiconductor Integrated Circuit Symposium (CSICS).

[3]  J. Raskin,et al.  Comparison of high-resistivity silicon surface passivation methods , 2007, 2007 European Microwave Integrated Circuit Conference.

[4]  Robert M. Young,et al.  12.5 THz Fco GeTe Inline Phase-Change Switch Technology for Reconfigurable RF and Switching Applications , 2014, 2014 IEEE Compound Semiconductor Integrated Circuit Symposium (CSICS).

[5]  Robert M. Young,et al.  Low-loss non-volatile phase-change RF switching technology for system reconfigurability and reliability , 2014, Defense + Security Symposium.

[6]  P. Cochat,et al.  Et al , 2008, Archives de pediatrie : organe officiel de la Societe francaise de pediatrie.

[7]  Min Xu,et al.  Study of the Crystallization Dynamics and Threshold Voltage of Phase Change Materials for Use in Reconfigurable RF Switches and Non-volatile Memories , 2017 .

[8]  Thermal analysis of an indirectly heat pulsed non-volatile phase change material microwave switch , 2014 .

[9]  R. Young,et al.  Low-loss latching microwave switch using thermally pulsed non-volatile chalcogenide phase change materials , 2014 .

[10]  D. Lederer,et al.  Substrate loss mechanisms for microstrip and CPW transmission lines on lossy silicon wafers , 2002, 2002 IEEE MTT-S International Microwave Symposium Digest (Cat. No.02CH37278).

[11]  Robert M. Young,et al.  Recent advances in fabrication and characterization of GeTe-based phase-change RF switches and MMICs , 2017, 2017 IEEE MTT-S International Microwave Symposium (IMS).