Several new formulations of solar cell module ethylene vinyl acetate (EVA)-based encapsulant have been developed at NREL and have greatly improved photostability against UV-induced discoloration. The new EVA formulations use stabilizers and a curing agent entirely different from any of those used in existing formulations. No discoloration was observed for the laminated and cured samples that were exposed to a /spl sim/5-Sun UV light (300-400 nm) from a solar simulator at a black panel temperature (BPT) of 44/spl deg//spl plusmn/2/spl deg/C for /spl sim/3250 h followed by at 85/spl deg/C for /spl sim/850 h, an equivalent of approximately /spl sim/9.4 years for an daily, 1-Sun solar exposure in Golden, Colorado. Under the same conditions, substantial discoloration and premature delamination were observed for two commercial EVA formulations. Encapsulation with the new EVA formulations should extend the long-term stability for PV modules in the field, especially when coupled with UV-filtering, Ce-containing glass superstrates.
[1]
F. J. Pern,et al.
Luminescence and absorption characterization of ethylene-vinyl acetate encapsulant for PV modules before and after weathering degradation
,
1993
.
[2]
F. J. Pern,et al.
Factors that affect the EVA encapsulant discoloration rate upon accelerated exposure
,
1994,
Proceedings of 1994 IEEE 1st World Conference on Photovoltaic Energy Conversion - WCPEC (A Joint Conference of PVSC, PVSEC and PSEC).
[3]
F. Pern,et al.
Encapsulation of PV modules using ethylene vinyl acetate copolymer as a pottant: A critical review
,
1996
.
[4]
F. J. Pern,et al.
Ethylene‐vinyl acetate (EVA) encapsulants for photovoltaic modules: Degradation and discoloration mechanisms and formulation modifications for improved photostability
,
1997
.