Noise generation by vacuum cleaner suction units: Part I. Noise generating mechanisms – An overview

Among all household appliances, the vacuum cleaner is the most powerful source of noise. The built-in suction unit, consisting of an electric motor and a centrifugal blower, represents the main source of noise; this is partially aerodynamic, mechanical and electromagnetic in origin. The contribution of the particular origin of noise generation to the total noise level depends on the geometry of the suction unit and operating conditions. The operating point of a suction unit built into a vacuum cleaner depends on the amount of dust particles in the dust bag and is constantly changing during operation until it reaches a zero flow rate. There are differences in noise generation at different operating conditions as well as between the suction units having a blower without and with a vaned diffuser. In this part of the paper, an overview of aerodynamic, mechanical and electromagnetic noise origins at different operating conditions is given.

[1]  Johannes Brändlein,et al.  Ball and roller bearings: Theory, design, and application , 1985 .

[2]  Timothy A. Brungart,et al.  Installation effects on fan acoustic and aerodynamic performance , 1999 .

[3]  Gerald C. Lauchle,et al.  Aerodynamically-induced noise in an automotive alternator , 1995 .

[4]  Gerald C. Lauchle,et al.  Inlet Flow Conditions and Tonal Sound Radiation from a Subsonic Fan , 1988 .

[5]  P. D. McFadden,et al.  APPLICATION OF SYNCHRONOUS AVERAGING TO VIBRATION MONITORING OF ROLLING ELEMENT BEARINGS , 2000 .

[6]  Timothy A. Brungart,et al.  Modifications of a handheld vacuum cleaner for noise control , 2001 .

[7]  Joseph C. S. Lai,et al.  VIBRATION ANALYSIS OF AN INDUCTION MOTOR , 1999 .

[8]  Jurij Prezelj,et al.  Noise Generation by Vacuum Cleaner Suction Units , 2008 .

[9]  Leo L. Beranek,et al.  Noise and vibration control , 1971 .

[10]  Sang Joon Suh,et al.  Case history: noise source identification of an automobile alternator by RPM dependent noise and vibration spectrum analysis , 1991 .

[11]  R. E. Longhouse Noise mechanism separation and design considerations for low tip-speed, axial-flow fans , 1976 .

[12]  L. Timár-P.,et al.  Noise and vibration of electrical machines , 1989 .

[13]  J. Adin Mann,et al.  Iterative design method to reduce the exhaust and venting noise of vacuum cleaner motor with minimum use of absorptive foam , 1997 .

[14]  M Čudina Noise generation in vane axial fans due to rotating stall and surge , 2001 .

[15]  Sung-Hwan Shin,et al.  Experimental design and assessment of product sound quality: application to a vacuum cleaner , 2003 .

[16]  Peregrin Laszlo Timar The Influence of Loading on the Sound Power Level Radiated by Induction Motors , 1988 .

[17]  Mirko Cudina Noise generation by rotating stall and surge in vane-axial fans , 2000 .