Output-Only Identification of Vibratory Machine Suspension Parameters under Exploitational Conditions

The paper concerns model based identification of vibratory machine body suspension system on the basis of dynamic responses measured under exploitational conditions. The research was carried out by means of the restoring force, boundary perturbation and direct parameter estimation techniques which, on the contrary to classical nonlinear system identification methods, requires neither excitation measurements nor linear behaviour of the considered system around an operating point. At the first stage of the research, parameters of the machine body suspension system were identified. Results accuracy was verified by determining percentage relative error of mass estimation with respect to the value calculated based on the machine geometrical and material properties. In the next step, the suspension system was modified by introduction of a nonlinear damping system. Obtained results proved that the assumed identification method is convenient for vibratory machine suspension condition monitoring and determining forces transferred on machine foundations.

[1]  Christophe Pierre,et al.  Normal Modes for Non-Linear Vibratory Systems , 1993 .

[2]  M. I. Qaisi,et al.  A POWER-SERIES SOLUTION FOR A STRONGLY NON-LINEAR TWO-DEGREE-OF-FREEDOM SYSTEM , 2000 .

[3]  Vladimir I. Babitsky,et al.  Vibration of Strongly Nonlinear Discontinuous Systems , 2001 .

[4]  K. Worden,et al.  Past, present and future of nonlinear system identification in structural dynamics , 2006 .

[5]  Sami F. Masri,et al.  A Nonparametric Identification Technique for Nonlinear Dynamic Problems , 1979 .

[6]  Jan Awrejcewicz,et al.  Nonclassical Thermoelastic Problems in Nonlinear Dynamics of Shells , 2002 .

[7]  Alexander F. Vakakis,et al.  NON-LINEAR NORMAL MODES (NNMs) AND THEIR APPLICATIONS IN VIBRATION THEORY: AN OVERVIEW , 1997 .

[8]  Douglas E. Adams,et al.  A Technique for Estimating Linear Parameters Using Nonlinear Restoring Force Extraction in the Absence of an Input Measurement , 2005 .

[9]  Oleg Gendelman,et al.  Energy Pumping in Nonlinear Mechanical Oscillators: Part II—Resonance Capture , 2001 .

[10]  J. R. E. O’Malley.  Singular perturbation methods for ordinary differential equations , 1991 .

[11]  Michael D. Todd,et al.  Use of data-driven phase space models in assessing the strength of a bolted connection in a composite beam , 2004 .

[12]  R. M. Rosenberg,et al.  The Normal Modes of Nonlinear n-Degree-of-Freedom Systems , 1962 .

[13]  A. Nayfeh,et al.  Linear and Nonlinear Structural Mechanics , 2002 .

[14]  Henry J. Rice,et al.  Identification of weakly non-linear systems using equivalent linearization , 1995 .

[15]  J. Cole,et al.  Multiple Scale and Singular Perturbation Methods , 1996 .

[16]  Jessica Daecher,et al.  Introduction To Perturbation Techniques , 2016 .

[17]  P. Ibáñez,et al.  Identification of dynamic parameters of linear and non-linear structural models from experimental data , 1973 .

[18]  J. Awrejcewicz,et al.  Asymptotical Mechanics of Thin-Walled Structures , 2004 .