Status and prospects of intermediate temperature soid oxide fuel cells

Compared with conventional electric power generation systems, the solid oxide fuel cell (SOFC) has many advantages because of its unique features. High temperature SOFC has been successfully developed to its commercial applications, but it still faces many problems which hamper large-scale commercial applications of SOFC. To reduce the cost of SOFC, intermediate temperature solid oxide fuel cell (IT-SOFC) is presently under rapid development. The status of IT-SOFC was reviewed with emphasis on discussion of their component materials.

[1]  John A. Kilner,et al.  Optimisation of composite cathodes for intermediate temperature SOFC applications , 1999 .

[2]  Zongping Shao,et al.  A thermally self-sustained micro solid-oxide fuel-cell stack with high power density , 2005, Nature.

[3]  Changrong Xia,et al.  Low-temperature SOFCs based on Gd0.1Ce0.9O1.95 fabricated by dry pressing , 2001 .

[4]  Nguyen Q. Minh,et al.  Solid oxide fuel cell technology—features and applications , 2004 .

[5]  Fanglin Chen,et al.  Reduced-Temperature Solid Oxide Fuel Cells Fabricated by Screen Printing , 2001 .

[6]  S. Hyun,et al.  Fabrication and characterization of a YSZ/YDC composite electrolyte by a sol–gel coating method , 2002 .

[7]  Xingyan Xu,et al.  YSZ thin films deposited by spin-coating for IT-SOFCs , 2005 .

[8]  G. Meng,et al.  Novel intermediate temperature ceramic fuel cells with doped ceria-based composite electrolytes , 2002 .

[9]  J. Frade,et al.  Assessment of Ni/YSZ anodes prepared by combustion synthesis , 2002 .

[10]  I. Albinsson,et al.  Electrolysis studies based on ceria-based composites , 2006 .

[11]  Z. Lü,et al.  Electrochemical performance of (Ba0.5Sr0.5)0.9Sm0.1Co0.8Fe0.2O3−δ as an intermediate temperature solid oxide fuel cell cathode , 2007 .

[12]  Seung M. Oh,et al.  Origin of cathodic degradation and new phase formation at the La0.9Sr0.1MnO3/YSZ interface , 1996 .

[13]  Masayuki Dokiya,et al.  Supported Zr(Sc)O2 SOFCs for reduced temperature prepared by slurry coating and co-firing , 2002 .

[14]  John B Goodenough,et al.  Double Perovskites as Anode Materials for Solid-Oxide Fuel Cells , 2006, Science.

[15]  John T. S. Irvine,et al.  Investigation of scandia–yttria–zirconia system as an electrolyte material for intermediate temperature fuel cells—influence of yttria content in system (Y2O3)x(Sc2O3)(11−x)(ZrO2)89 , 2004 .

[16]  G. Meng,et al.  Effect of Gd (Sm) doping on properties of ceria electrolyte for solid oxide fuel cells , 2003 .

[17]  A. Petric,et al.  Superior Oxygen Ion Conductivity of Lanthanum Gallate Doped with Strontium and Magnesium , 1996 .

[18]  S. Chan,et al.  Low-temperature SOFC with thin film GDC electrolyte prepared in situ by solid-state reaction , 2004 .

[19]  Günter Schiller,et al.  Development and characterization of vacuum plasma sprayed thin film solid oxide fuel cells , 2001 .

[20]  Koichi Eguchi,et al.  Application of the stabilized zirconia thin film prepared by spray pyrolysis method to SOFC , 1990 .

[21]  G. Meng,et al.  Ceramic fuel cells based on ceria–carbonate salt composite electrolyte , 2003 .

[22]  J. Kilner,et al.  Oxygen transport in La1−xSrxMn1−yCoyO3±δ perovskites: Part I. Oxygen tracer diffusion , 1998 .

[23]  J. D. Carter,et al.  Development of Solid‐Oxide Fuel Cells That Operate at 500°C , 1999 .

[24]  Toshio Maruyama,et al.  Properties of Ni/YSZ cermet as anode for SOFC , 2000 .

[25]  Brian C. H. Steele,et al.  Appraisal of Ce1−yGdyO2−y/2 electrolytes for IT-SOFC operation at 500°C , 2000 .

[26]  I. Gorst Survey of energy resources , 1985 .

[27]  Z. Ogumi,et al.  Preparation of thin yttria-stabilized zirconia films by vapor-phase electrolytic deposition , 1992 .

[28]  B. Zhu Advantages of intermediate temperature solid oxide fuel cells for tractionary applications , 2001 .

[29]  T. Wen,et al.  Study of Ln0.6Sr0.4Co0.8Mn0.2O3-δ (Ln=La, Gd, Sm or Nd) as the cathode materials for intermediate temperature SOFC , 2003 .

[30]  A. Boudghene Stambouli,et al.  Solid oxide fuel cells (SOFCs): a review of an environmentally clean and efficient source of energy , 2002 .

[31]  Meilin Liu,et al.  Ni-Ce0.9Gd0.1O1.95 anode for GDC electrolyte-based low-temperature SOFCs , 2004 .

[32]  Zongping Shao,et al.  A high-performance cathode for the next generation of solid-oxide fuel cells , 2004, Nature.